Ball width

A more important part of bathroom decoration is the size and installation of sink. Why is it inconvenient for many friends to use the sink every time after they check in? Back pain, water leakage and splashing are common things. It can be clearly said that most of these problems are the size and installation of the bathroom washstand. When measuring the room, the owner did not fully consider these details, and the reserved position was not enough. In the end, the size of the washbasin cabinet or brick washbasin cabinet is not suitable for the height requirements and use needs of the family, which will lead to many inconveniences in using it.

Ordinary size

1, the size of the sink has a minimum standard, the minimum width should not be less than 550mm, and one side is 600 mm. In order to save space, some collective toilets reduce the sink to about 300mm, but even if they do this, the sink can't be only 300mm wide, which is not convenient for putting things, so the width of the sink should be greater than or equal to 550mm, which can be increased according to the actual situation, but it must not be less.

2. Another key is to leave a gap of 550 mm from the center of the washbasin to the walls on both sides, that is to say, there should be a gap of 1 100 to place the countertop, otherwise it will be awkward to use, so we can synthesize everyone's opinions. Some people don't even need a washbasin cabinet to save money, so they need a floor-standing washbasin.

3. However, a commonly used size is the basin under the desk: 850 mm on the desktop, and the basin above the desk: 750 mm on the desktop. This size is the standard size of bathroom sink, but we can look at it according to our actual situation. If the average height of a family is relatively high, it is of course necessary to design it higher. If the average height of the home is not very high, it is recommended to install the bathroom sink lower.