South Korea's nuclear magnetic vibrator sucked the oxygen bottle, causing the patient to die. How can we avoid this kind of accident from happening again?

Strictly abide by the regulations of the nuclear magnetic resonance vibration inspection room, ensure that there are no metal objects on the body after entering, and the operators shall operate as required to avoid similar accidents.

During the working process of the nuclear magnetic vibration machine, accidents caused by absorbing oxygen bottles or other articles did happen, not only in South Korea, but also in Mumbai, India and the United States. These incidents occurred because the metal oxygen was not strictly treated during the inspection, so it was placed in the inspection room. The magnetic resonance vibration machine has strong magnetism, which will suck the oxygen cylinder during the working process, causing accidents.

First, strictly abide by relevant regulations.

No matter in which hospital, the nuclear magnetic vibrator is a large-scale medical examination equipment, and its working environment is strictly regulated. The staff working in this examination room must act according to the regulations, but it is the most basic rule and requirement in his working environment that metal objects cannot be placed in the examination room. This incident happened in Korea, because it didn't comply with this basic rule, which led to the accident and the death of the patient.

Second, do a good job in patient examination.

Magnetic resonance vibration examination is to avoid accidents and to do a good job in patient examination. After each patient enters the examination room, he should be reminded in time to take out all the metal objects on his body and put them in a safe place outside. You shouldn't bring them indoors, and you shouldn't check them with a machine. Otherwise, accidents will also occur, and those who are light will be injured, which will affect the personal safety of patients. Patients with metal dentures or metal ornaments in blood vessels can't do MRI.

Third, the examination room management should be in place.

The daily management of the procuratorate is an effective means to avoid such accidents. Before starting work every day, check the indoor environment for metal objects or other objects that are not allowed to be brought in. In addition, we should put up signs prohibiting metal objects in obvious places. When problems are found, they should be rectified in time to provide a safe working environment for the machine, which can make its inspection results more accurate and avoid accidents in the working process.