Construction site environmental management?

In adhering to the business philosophy of "creating happiness, building ideals, serving all parties, and developing harmoniously", we pursue the policy of "creating customer-satisfying products, creating green and environmentally friendly projects, ensuring the health and safety of employees, and developing with integrity and law-abiding". Management policy, implement ISO9001 quality, ISO14001 environment and OHSAS18001 occupational health and safety management standards, introduce CIS, implement high-quality brand strategy, and create high-quality standard projects. The construction site environment should be darkened as follows. 1. Dust control (1) The general plane area and the surrounding areas of the construction site should be cleaned by designated personnel after sprinkling water 2-3 times a day, and the flowers and plants in the green areas of the site should be regularly sprayed with water to flush them to maintain clean. (2) Build a fence where sand and stone materials are stored, and cover the surface with a canopy to prevent wind and dust from spreading and affecting environmental sanitation. (3) Dedicated personnel will be set up on site to clean the mud and soil stained by vehicles, grass mats will be laid on the entrance and exit roads, and car wash pools and high-pressure car wash pumps will be set up to ensure that the city appearance and surrounding environment are clean. (4) In the earthwork stage, in order to prevent dust, high-pressure pumps and earth-moving trucks are set up on site. When dust is generated by unloading soil, water guns are sprayed to extinguish the dust immediately. The earthwork above ground level is covered with safety netting. 2. Noise control (1) Low-noise machinery is used in the site. Under normal circumstances, no construction will be done after 10 pm and during lunch break. (2) Manual transfer is used for material loading and unloading. In particular, it is strictly forbidden to throw steel pipes and formwork or use a one-time dump truck to unload materials. (3) Educate operators to reduce man-made noise pollution. Cars honking high-pitched horns are strictly prohibited. 3. Sewage control (1) Construction waste water will be discharged in an organized manner after sedimentation treatment. (2) Domestic water is treated in septic tanks and discharged to the owner's sewage treatment station. (3) Vigorously promote education on water conservation, reduce pollution, and avoid dumping and discharging water indiscriminately. 4. Safe and civilized construction layout (1) On the left wall of the site gate entrance, there is a company introduction and a publicity board with five pictures and one sign. (2) Write the name of the project and the construction unit on the side of the entrance to the office exterior wall. (3) There is a guard room and a guard box at the entrance of the gate. There is a dedicated construction road within the site. There are smoking rooms, tea pavilions, construction waste dumps, green belts, etc. on the site. (4) Signs in the production area, living area, and office area are clearly complete, and safety signs, machinery operating procedures, operators, and rules and regulations are complete next to machinery, mixing stations, steel processing rooms, and construction sites. 5. Set up a 5.5m wide steel gate at the entrance, set up corporate logos and construction slogans on both sides of the gate, set up light boxes on the gates, write the company name and project name on the light boxes, and set up corporate business philosophy signs on the left side of the peripheral walls on both sides of the intersection. On the right is a head-up rendering of the proposed building. 6. A guard duty room is set up at the entrance of the gate, and a guard system sign is hung. The duty staff is responsible for registering the entry and exit of people and materials. 7. The main road at the connection between the site road and the construction area is poured with C20 concrete, with a thickness of 15cm; the non-main construction site is paved with stone sand and compacted, and the surface layer is leveled and calendered with 1:2 cement mortar, and is placed on both sides of the entrance and A green belt is set up at the entrance of the office and in the open space around the dormitory, with a green area of ??1,200 square meters. Automatic sprinklers and manual auxiliary water spraying are used in open spaces and proposed building locations to prevent dust. 8. The dormitory is separated from the construction site and is built in mobile rooms with a floor height of 2.5m and the ground is plastered with cement mortar. The dormitories are uniformly equipped with double-decker iron frame beds, daily necessities are neatly placed, and a dormitory management system is established with specialized cleaning staff to ensure the hygiene and tidiness of the dormitories. 9. The toilet and bathroom adopt color steel plate structure, the roof adopts color steel folding plate, the floor is paved with non-slip floor tiles, the toilet squat uses granite partitions and high-water-level energy-saving water tanks, and the bathroom uses waterproof lamp holder lighting to ensure the safety of workers. 10. The kitchen floor is paved with non-slip tiles, the walls, stove, sink, and vegetable counter are tiled, the ceiling is made of plastic ceiling, and the sanitary system is installed on the wall. It has complete dust-proof, fly-proof, smoke exhaust, exhaust and disinfection facilities, and uses liquefied petroleum gas for fire making to avoid environmental pollution. It also has a "Health Permit", and the cooking staff must hold a health certificate to work. A tea supply station is set up next to the kitchen, and dining tables are uniformly arranged in the canteen. 11. 9. The sewage from toilets, bathrooms and canteens passes through the third-level septic tank on the construction site, and the outlet is connected to the municipal sewage pipe. 12. Set up study and entertainment activity rooms and smoking areas for employees in the dormitory area to ensure that construction workers have rich leisure time activities. 13. Arrange material storage areas, warehouses, machinery and equipment according to the general construction plan; set up signs on materials and warehouses to indicate their names, varieties and specifications, and hang operating procedure signs on machinery and equipment. Among them, dense mesh safety nets are hung around the mortar and concrete mixers to reduce dust.

14. Establish a sanitation management system and set up full-time cleaning personnel to ensure that the living area, office area, and construction area are clean and tidy without stagnant water. Domestic waste is put into sanitary containers, construction waste is cleaned up in a timely manner and removed on the same day, and workers' dormitories are regularly designated. , offices, toilets, canteens for disinfection, mosquito control, fly control, rodent control, etc. 15. Fire extinguishers are arranged according to the actual situation on site, with no-smoking signs and publicity and education materials in main parts. Establish a fire prevention system, fire prevention leading group and volunteer fire brigade, complete the approval procedures for open fire operations, and have dedicated personnel to inspect open fire operations on site. 16. On-site construction personnel shall wear safety protective equipment and badges in accordance with regulations when working. Based on the above summary of on-site construction experience, I hope that the expert leaders of each unit will provide our company with supervision and guidance in the future implementation stage.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd