Chief Engineer Job Responsibilities

Chief Engineer Job Responsibilities

In a society that is developing at an ever-increasing pace, the number of occasions when people use their job responsibilities is increasing. Formulating job responsibilities can effectively standardize operating behaviors. How should job responsibilities be appropriately formulated? The following are the chief engineer job responsibilities that I have collected for everyone. They are for reference only. You are welcome to read them.

Chief Engineer Job Responsibilities 1

1. Under the leadership of the general manager, be responsible for the company's technical and quality management work, and be fully responsible for the company's safety technology and quality standards.

2. Implement the safety production policy, strictly implement technical policies, and implement the "Coal Mine Safety Regulations" and industry technical specifications.

3. Implement national and industry quality regulations and specifications, and implement the group company’s quality standards.

4. Perform design, safety technical measures and operating procedures preparation, review and approval responsibilities within the scope of authority to ensure that it is technically feasible.

5. Guide the preparation and drawing of various drawings, ensure that the drawings and information are accurate and complete, and guide safe production.

6. Guide the formulation of quality standard systems for each unit of the company and promote quality standardization.

7. Formulate an annual "one supply and three prevention" plan to prevent and control water, production, excavation, and mining, achieve a balance among the three quantities, and strictly prevent mining imbalances.

8. Responsible for the testing and promotion of new technologies, new processes, and new equipment.

9. Be fully responsible for the “one supply and three defenses” and mine water prevention and control work. Regularly analyze and study the "one supply, three defenses" and mine water prevention and control work in the company's mines; formulate technical measures to solve major problems in the "one supply, three defenses" and mine water prevention and control.

10. Be specifically responsible for organizing and formulating emergency plans for major mine accidents, formulating emergency rescue technical measures, and preparing coal mine safety technical measures plans.

11. Responsible for mine rescue work. When major production safety accidents occur, assist the general manager in organizing and directing rescue operations and participate in accident investigation and handling.

12. Organize a monthly meeting of engineering and technical personnel to study and solve technical problems in safety production.

13. Go deep into the mine site as required to study and solve technical problems existing in the mine production process. Chief Engineer Job Responsibilities 2

1. Under the leadership of the general manager, preside over the company's project construction and engineering technology, and be in charge of engineering project management and technical systems; track scientific and technological trends, perform duties conscientiously, and continuously promote technological progress of the company.

2. Responsible for organizing and implementing relevant national guidelines, policies, laws, regulations and related industry technical standards for engineering construction, and continuously improving project quality and construction technology levels.

3. Responsible for organizing project technical personnel to review project construction drawings, focusing on key project management and formulation of major technical plans.

4. Responsible for reviewing the project construction organization design, focusing on reviewing the effectiveness of project management measures and the feasibility of construction technical support, so as to ensure local conditions, focused control, and easy operation.

5. Responsible for the promotion and application of new technologies, processes, equipment, materials and advanced scientific and technological achievements, implement the guiding ideology that science and technology is the primary productive force, and continuously improve the level of science and technology.

6. Responsible for guiding the deployment and combination of personnel between projects, so that technical personnel can make full use of their talents, effectively utilize their professional expertise, and strive to maximize the economic benefits of engineering projects.

7. Responsible for organizing project and technical leaders to conduct regular inspections of the project, conduct in-depth supervision and inspection of key projects, propose improvement measures for technical issues and management quality issues, and guide various projects to carry out excellence competitions Activity.

8. Support the work of self-inspectors and safety officers, always implement the construction policy of "safety first, quality first", promptly promote good safety and quality models, and monitor violations of construction procedures and operating regulations. Stop them at any time, and order them to stop work for rectification if they are serious. Repeat offenders may report to the company for punishment.

9. Cooperate with the human resources department to provide the general manager with annual employee training, graduate professional recruitment and related talent introduction plans.

10. Responsible for the annual technical assessment of technical personnel, appraising the work performance of technical personnel, guiding technical personnel to apply for professional titles, and signing the company's review opinions.

11. The persons in charge of the inspection and guidance project and the technical department shall conduct investigation, research, review, and summary of their respective work, and provide the general manager with timely basis or suggestions for the company's operation management and related decisions.

12. Complete other tasks assigned by the chairman and general manager. Chief Engineer Job Responsibilities 3

1. Assist the Chief Engineer, use the OA management system for project management, and assist in completing the attendance and performance appraisal of project members;

2. Assist the R&D Engineer with material procurement , specifically completing the payment process according to the purchase contract, and then tracking the logistics arrival progress;

3. Inventory management, recording the outbound and inbound items, as well as inventory levels;

4. Assist engineers to prepare project documents, including technical specifications and operating instructions;

5. Assist sales to prepare plans (including design plans and cost sheets), print bid documents, and customer training materials according to bidding requirements. Send etc. Chief Engineer Job Responsibilities 4

1. Responsible for the comprehensive technical management of all the company's engineering projects.

2. Participate in the review and approval of the schematic design, preliminary design and construction drawing design of the project, and propose modifications to the technical problems existing in the design.

3. Participate in the review of technical requirements in bidding documents.

4. Participate in the geological survey and design management of individual projects (including geological survey, design, drawing review, etc.);

5. Responsible for checking the implementation of the minutes of the drawing review.

6. Go deep into the construction site, comply with relevant construction specifications, and be responsible for project technical management and supervision of project quality, project progress and safety. He is mainly responsible for supervising and inspecting whether the construction unit is carrying out construction according to the requirements of construction drawings and engineering specifications, strictly inspecting the quality of the project, and ensuring the quality of the project.

7. Responsible for explaining relevant technical issues in the construction drawings to the construction unit and promptly handling relevant technical issues at the construction site; responsible for providing decision-making opinions on major changes to the project.

8. Be fully responsible for quality, safety, and civilized construction management, strictly control the process, and organize completion acceptance

9. Insist on investigation and research, discover problems in a timely manner, take measures, and report to the company regularly Project progress. Chief Engineer Job Responsibilities 5

1. Cooperate with the Engineering Department, coordinate and solve technical problems existing in the project, and coordinate the mutual connection and cooperation of various majors.

2. Supervise and inspect the construction quality of the project and propose project improvement plans.

3. Guide the quality management of the engineering department and the management of supervision units.

4. Examine and approve the completion acceptance report of branch projects and unit projects.

5. Guide project maintenance management work.

6. Compilation of supervision project data.

Chief Engineer Job Responsibilities Chief Engineer Job Responsibilities 6

1. Responsible for proposing feasibility reports on R&D projects and organizing and formulating R&D plans for new products.

2. Responsible for approving the final assembly drawings, schematic diagrams, and electrical drawings of product designs or changes; responsible for the approval of relevant R&D design, testing, and production documents.

3. Supervise and inspect the completion of tasks at each stage of the project at any time.

4. Responsible for the demonstration, inspection and approval of the final product for emergency release under special circumstances.

5. Responsible for the approval of various engineering changes, and responsible for the review, organization and approval of various new product samples before they are sent.

6. Responsible for the overall construction of the R&D team and talent training to ensure that technical personnel in each position meet the requirements for the position.

7. Review whether the design documents are complete and in compliance with national policies and regulations.

8. Review whether the approval documents of each competent department are complete and whether the approval opinions are carefully implemented and recorded.

9. Examine and review major technical issues related to technological innovations related to various majors, such as the adoption of new materials, new technologies, and new processes.

10. Review the quality of the design drawings, whether the design, proofreading, review and standardization are in place, and whether the quality of the drawings meets the relevant quality management regulations.

Chief Engineer Job Responsibilities 7

1. Carry out work under the leadership of the general manager and report to the general manager and the project management committee.

2. Connect with the design institute and organize the demonstration of the design plan of the development project; organize the tracking and review of all aspects of the project design process and conduct effective control; be responsible for organizing the design review of construction drawings.

3. Participate in the formulation and revision of project development and construction plans.

4. Responsible for organizing the preparation of design briefs and formulating project construction standards and design standards.

5. Approval of changes during construction, negotiation and other proposals, and guide the engineering department to handle project changes.

6. Participate in the inspection, screening and evaluation of qualified suppliers, be responsible for organizing the review of technical bids in project bidding, and review and approve the construction organization design of the construction unit and the "Supervision Plan" of the supervision unit.

7. Pay attention to market dynamics, conduct research on new processes and new technologies in the industry, and make suggestions for project construction to shorten the construction period, improve project quality, and reduce project costs.

8. Participate in joint review of drawings and approve special construction plans.

9. Cooperate with the Engineering Department to coordinate and solve technical problems existing in the project, and coordinate the connection and cooperation between various majors.

10. Supervise and inspect the construction quality of the project and propose project improvement plans.

11. Guide the quality management of the engineering department and the management of supervision units.

12. Examine and approve the completion acceptance report of branch projects and unit projects.

13. Guide project maintenance management work.

14. Compilation of supervision project data. Chief Engineer Job Responsibilities 8

1. Nominated by the general manager and appointed by the board of directors. Cooperate with the general manager.

2. Responsible for formulating the work scope, job responsibilities, and business results review and confirmation procedures for each functional business section of the company

3. Responsible for the technical guidance, business training, and functional performance of each functional business section of the company management work.

4. Responsible for the internal and external review and issuance of project-related diagrams and design documents;

5. Handle major design and construction quality issues during the construction process, and participate in project quality and acceptance Work.

6. Review and confirm the legality and operability of various contract text clauses related to the project.

7. Review and confirm the legality and accuracy of contract payment and contract settlement related to the project.

Responsibilities of the company’s chief project engineer

The chief engineer is responsible for the company’s project leader, design, and supervision work. Its main responsibilities are:

1. Examine and approve the design plan for new project development

(1) Deploy the design plan for new project development, organize meetings for discussion and approval, and submit it to the general manager for approval.

(2) After the project is approved, a sub-item implementation plan shall be prepared and the implementation shall be checked regularly. Major technical issues shall be decided.

(3) Examine and approve the general design drawings, construction drawings and technical documents, process plans, construction regulations, etc.

2. Solve the major technical keys and weak links of the development project.

3. Establish and improve the working procedures of engineering development projects and scientifically organize construction work.

(1) Examine and approve the overall construction organization design of each contractor.

(2) Regularly check the progress of construction of each project.

4. Technical training and technical inspection.

(1) Organize relevant departments to prepare the company’s training plan and review and approve its implementation.

(2) Establish a technical assessment system for engineering personnel.

(3) Establish assessment files for engineering personnel.

(4) Regularly check the implementation of the above items.

5. Technical management

(1) Establish and improve the technical responsibility system headed by the chief engineer.

(2) Establish and improve various work systems within the technical scope.

(3) Establish working procedures for technical work.

(4) Organize the signing of technical agreements with external parties and review and approve agreements for major projects.

6. Technical archives and technical confidentiality

(1) Organize the preparation of technical archive archiving plans and approve their implementation.

(2) Regularly check the implementation of the technical archive archiving plan for each project, and supervise the archiving of the following technical archives.

(3) Organize regular decryption of technical files and identification and processing of expired files.

(4) Review externally published technical information and technical papers.

7. Quality management

(1) Approval of the project quality plan formulated by the construction party.

(2) Regularly check the implementation of the project quality plan and make timely decisions in case of major problems.

(3) Regularly hold regular project quality work meetings to solve the company's major quality problems.

8. Organize relevant departments to do a good job in technical disclosure of bidding and winning projects.

9. Other duties assigned by the general manager.

Text preview of the responsibilities and qualities of the chief engineer of a real estate company:

A brief discussion of the responsibilities and qualities of the chief engineer of a real estate company. As the chief engineer of a real estate company, he reports directly to the general manager of the company or the engineering management center. Responsible and able to lead direct subordinates and functional departments to complete the entire process of project development.

Responsibilities 1. Responsible for project quality, safety management, technical guidance and participation in project budget, and assume responsibility; The chief engineer should have technical capabilities and professional qualities corresponding to his responsibilities, and is required to have professional qualifications that are sufficient for the position. experience and professional sensitivity. In engineering construction, quality accidents and safety accidents often occur suddenly and when people least expect them to happen. This requires the chief engineer to anticipate in advance which processes and types of work are prone to quality and safety accidents, and Make preventive measures as early as possible, provide corresponding and practical technical guidance, and try to prevent accidents from happening; if a quality or safety accident occurs, practical solutions should be proposed in accordance with relevant national regulations, and based on the size of the accident, Report to superiors in a timely manner, and while resolving the incident, develop an implementation plan to prevent recurrence. For new technologies, new materials, and new construction methods involved in the project, the chief engineer must first understand and master them, formulate construction plans and pilot operation plans, and then promote them after all construction personnel have mastered them.

In actual construction, it is very common for construction parties to cut corners and cut materials. The chief engineer should formulate corresponding inspection methods according to each stage of the project, and work with the supervision company and professional engineers to use various supervision methods to prevent it. Supervision work should be checked in a timely manner during work to prevent accidents or hidden dangers caused by supervision oversight or quality problems of individual supervisors.

Project budget settlement is inseparable from construction methods, engineering materials, engineering design and engineering changes. Participating in project budget settlement is one of the main responsibilities of the chief engineer. The chief engineer should play an important role in project budget settlement , review the project quantities, review applied sub-projects, review construction machinery, review the quantity of electricity and water used in construction, review the actual number of downtime days, review the number of rain and snow days, review issued project changes and project visas, etc., and assume corresponding responsibilities at the same time.

Responsibilities 2. Preside over the review of the design plan of the investment project, and approve all drawings and design technology change notices from the design unit;

I think the project design in the early stage of the project is the key to the success of the project. The key is that in the past, real estate companies often regarded construction quality as the first priority. For a century-old plan, the slogan quality first was only posted on the construction site. In fact, design quality should be the foundation of the project. People often say that construction is

The art of regret is that after the project is completed, it is discovered that there are still many problems, large and small. To be honest, the construction quality can be made up for through rework or repair, but design defects are often regretted for life. Therefore, the chief engineer should submit a project feasibility study report or design opinion letter according to the company's guidelines and project intentions, review the design plan and construction drawings, fully communicate and explain between the designer and the company's management, and completely The company's project intentions are reflected in the design. At the same time, the chief engineer should review the design based on the principles of beauty, practicality, economy, and solidity, and complete the design work with the minimum investment cost.

Design changes are not only the intention of Party A or the designer, but also a means for the construction party to increase income. The chief engineer must strictly control the changes to make them meet the actual needs of the project. For specious changes, no matter who All proposals shall be rejected.

Responsibility 3. Responsible for reviewing and controlling project construction costs;

During project implementation, various material changes, process changes, construction method changes, etc. that will increase costs should be strictly reviewed etc., and do a good job in cost control at all stages of the project. After the overall construction plan is determined, no changes will be made lightly.

Review the monthly progress and quarterly progress reports of construction, check the actual occurrence of project costs, and correct any deviations that occur. Various suggestions or plans put forward by the construction party should be carefully analyzed and studied, and any objections that are not accepted should be rejected. reasonable. Reasonable suggestions should also be submitted to collective discussion and submitted to superiors for approval before being adopted.

Responsibilities 4. Responsible for participating in the selection, bidding and bidding of construction units;

The selection, bidding and bidding of construction units is one of the important responsibilities of the chief engineer. The construction capacity, economic strength, social reputation, staffing, cooperation and cooperation with the owner, and the adequacy of preparation of machinery and materials of the construction unit are all necessary conditions for completing the project. In this work, it is necessary to conduct sufficient research and careful screening, carefully inspect the completed projects, inspect the construction plans of the selected units, etc., propose candidate construction units for bidding, and use market means in the bidding. Select the most reasonable construction unit.

Responsibility 5. Preside over the review and approval of the organizational design, construction technical plan and construction schedule proposed by the construction unit; After the organizational design, construction technical plan and construction schedule proposed by the construction unit are reviewed by the supervision unit, the chief engineer shall Host the review work of the owner: whether the construction organization design is a errand, whether it is feasible, whether it can achieve the proposed quality goals, construction period goals and cost goals, whether the cost reduction plan proposed by the construction party will reduce the quality of the project, and whether the construction technical plan Whether it is scientific and reasonable, whether it will affect the quality and construction period of the project, and whether there are quality hazards and safety hazards; whether the quality control plan is effective and coordinated with the supervision plan; the materials and equipment list and specifications and quality proposed by the construction unit Is it correct and reasonable? Can the material on-site inspection method proposed by the supervision engineer ensure the quality of the material? Is the construction schedule feasible? Is there any moisture mixed in it? What are the safeguard measures? The construction organization design is the construction outline of the project. Strictly speaking, let it go The reality is that you are deceiving yourself. Generally, construction units often do not pay attention to the preparation of construction organization design. They often deal with it or have no preparation ability. The chief engineer should inspect and supervise the construction unit and the supervising engineer to come up with a plan together. A scientific, reasonable and practical construction organization design shall be established and strictly implemented.

Responsibilities 6. Responsible for participating in the review of the supervision outline and monthly supervision reports, and inspecting the supervision work; whether the problems that arise are solved correctly and timely, whether the cooperation with the owner is harmonious, whether there is any concealment of reports, and whether there is There are no individual supervisory personnel acting for personal gain, and whether internal management is strict, etc. As the third party of the project, the supervisor is responsible for the overall management of the project such as quality, cost, progress, etc. Therefore, it is an important responsibility of the chief engineer to check the supervision work: whether the supervision work is carried out according to the supervision specifications, whether the various document exchanges are standardized, Whether the supervision inspection is timely,

Responsibilities 7. Responsible for supervising and inspecting the construction unit to strictly follow the drawings and technical regulations, ensure safe production, and ensure project quality;

The chief engineer should Check the site frequently to check the supervision is in place, especially important and hidden parts. Safety work is very important. Once a casualty accident occurs, it will have adverse effects on the project, social impact, and the psychology of the construction workers. The construction party and the supervisory party should be urged to jointly prevent casualty accidents. Chief Engineer Job Responsibilities 9

1. Participate in the company’s highest decision-making.

2. Responsible for organizing the company’s technical support and technical guidance.

3. Under the authorization of the president, lead the construction and maintenance of the company's integrated management system.

4. Host the company’s technological innovation and technical exchanges.

5. Organize and manage the departments in charge.

6. Complete other tasks assigned by superiors.

Chief Engineer Job Responsibilities 10

1. Be fully responsible for the technical work of the project, and interface with the technical director of the subcontracting unit and the technical department of the owner unit;

2. Implement relevant laws and regulations and company-related matters According to regulations, assist the project manager in charge of the technical management work of the project department;

3. Responsible for organizing and writing the project construction organization design, organizing and optimizing the construction organization design, guiding the preparation and approval of various construction plans, technical documents, construction measures, and solving Daily construction technical issues;

4. Responsible for technical briefings on construction organization design and construction plans, organizing technical briefings for sub-projects at all levels, and inspecting and supervising subcontracting units and construction teams according to technical specifications at all levels. Construction requires disclosure;

5. Responsible for technical communication with Party A, supervision, design, and subcontracting units; participate in design disclosure, organize joint review of internal project drawings, and make joint review records and disclosures, and inspect , Supervise the construction team to carry out construction according to the disclosure requirements;

6. Responsible for organizing the daily inspection and acceptance of the construction quality of project sub-items, divisions, and units, and responsible for organizing the measurement, testing, inspection, Technical review work;

7. Responsible for organizing the editing, collection, sorting and summary of various project technical data, responsible for organizing the preparation of project completion drawings, and responsible for organizing the transfer and filing of project completion data. Chief Engineer Job Responsibilities 11

1. Basic information:

Position name: Chief Engineer

Capacity standard: 1 person

Direct superior : General Manager

2. Job Responsibilities

(1) Overview

Organize the formulation and implementation of technical plans, product research and development plans and product quality management systems.

(2) Job Responsibilities

1. Under the leadership of the general manager, preside over the company's technology and technical management work, continuously promote the company's technological progress, and take charge of the company's technical system.

2. Strictly abide by the company's rules and regulations, and conscientiously perform their work responsibilities;

3. Organize the preparation of the company's long-term and short-term technology development plans, formulate scientific research plans, technological reform plans, and be responsible for scientific research Implementation of plans and management of technical work in the implementation of technical transformation plans.

4. Lead relevant departments to formulate technical research plans, product quality upgrading and excellence plans and quality improvement measures plans, organize and solve major technical problems in product quality, be responsible for technical and business guidance of quality management, and assist the general manager Supervise and inspect the implementation of various quality plans.

5. According to the development needs of the enterprise, prepare a new product trial production plan and a comprehensive production technology preparation plan, organize regular production technology preparation meetings, inspect, supervise and organize to ensure the realization of the new product plan and the production technology preparation plan, To speed up product upgrading.

6. Responsible for the management of the company’s technical files. Organize the preparation and revision of various processes and technical specifications; and effectively control them. Responsible for reviewing and approving changes to product technical conditions and technical status, as well as changes to key and key process status of finalized products. Host various technical appraisal meetings within the company.

7. According to the company's business policies and goals, prepare the annual technology implementation plan, and be responsible for organizing the implementation to ensure the smooth completion of the project.

8. Responsible for organizing and establishing sound rules and regulations for the company's technical management, scientific research and new product development management, coordinating the relationship with the technology development department, and timely organizing and solving key technical and major technical problems in production.

9. Organize and host regular technical work meetings and supervise, inspect and assess the implementation of the resolutions of the regular meetings to ensure the completion of technical work during the production and operation process.

10. Pay close attention to the coordination of time schedule and process technology to ensure the normal implementation of production or projects. Ensure quality control, strictly prohibit shoddy and fraudulent behavior, and improve employees' quality awareness.

11. Complete other tasks assigned by the general manager.

3. Position authority

1. Have the power to guide, direct, coordinate, supervise and manage work within the scope of production technology and quality inspection.

2. Be fully responsible for the quality management work in charge of them.

3. Have the power to inspect the work of subordinates.

4. Have the right to make suggestions for the deployment of directly subordinate positions, the right to nominate appointments and the right to make suggestions for rewards and punishments.

5. Have the right to assess and evaluate the management level, business level and performance of subordinates.

4. Working conditions and environment

Workplace: independent office.

Environmental conditions: basically comfortable.

Risk: Basically no danger, no occupational disease risk.

5. Working hours

Normal working hours, no obvious holidays.

6. Qualifications

1. Work experience: More than 5 years of experience in technical support services in the metal corrugated pipe industry, and relevant work experience in technical management.

2. Educational requirements: College degree or above in science and engineering.

7. Physical condition and attitude

Good health, honest, honest, mature, open-minded, confident, and have a high degree of enthusiasm for work.

1. Broad knowledge, good at interacting with people of various personalities, and good at communication and communication.

2. Have strong adaptability, sense of responsibility, enthusiasm for people, and good team spirit.

8. Work skills

1. Be familiar with the company’s product structure, performance, mechanism, usage, etc.;

2. Have a solid theoretical foundation and technical work Experience and ability to independently solve problems related to product use. Chief Engineer Job Responsibilities 12

1. Under the leadership of the construction company manager, be responsible for the work of the production and operation, quality and safety, and materials and equipment departments.

2. Assist managers to establish the company’s quality assurance system, production safety system, environmental sanitation guarantee system, etc.

3. Responsible for presiding over the company’s technical management work, reviewing and approving construction organization design and related technical documents.

4. Organize and formulate the goals that the unit's project quality should achieve, formulate and implement corrective and preventive measures to ensure the realization of the quality department goals. Participate in and review the quality control measures of each branch and unit project.

5. Review and approve the company’s technical documents on environmental protection, employee health, and construction safety, and supervise their implementation.

6. Preside over and review bidding documents and contract management.

7. Conduct technical job training and assessment for various engineering and technical personnel. Participate in employee performance reviews.

8. Review the company's technical quality, production and operation development plan, and assist the manager in formulating and implementing annual chief engineer job responsibilities 13

1. Participate in the preparation of project construction plans;

2 Responsible for the preparation, review, submission and implementation of the project construction organization design (construction plan), and responsible for the disclosure of construction organization design;

3 Implement the national technical regulations, specifications, standards, and organize the project Project submission for inspection;

4 Responsible for the joint review of construction project drawings and project in-depth design work, and coordination with Party A and the design institute;

5 Responsible for the project quality management system and environmental management system and occupational health and safety management system operation;

6 Responsible for the collation and archiving of project completion data;

7 Responsible for the preparation of construction project machinery and material arrival plans, and the testing of materials , Inspection work; Chief Engineer Job Responsibilities 14

1. Organize and establish a complete new product development system to ensure that product quality is steadily improved to ensure that user requirements are met.

2. Responsible for communicating and solving technical problems with external parties (customers and suppliers) during project development to ensure that the R&D project proceeds as scheduled.

3. Cooperate with the marketing department to develop new products and projects.

4. Responsible for organizing the preparation, filing and implementation of enterprise standards.

5. Responsible for other tasks assigned by the general manager. Chief Engineer Job Responsibilities 15

1. Conscientiously implement the party and national safety production guidelines, policies, regulations and superior safety technology decisions and regulations.

2. Participate in the safety meeting before 8 o'clock in the morning and put forward technical requirements for special links, changing links and elimination of major safety hazards.

3. Take direct leadership responsibility for the safety and technical work of the entire mine, and organize the formulation and review of the annual plan and long-term development plan for the entire mine.

4. Prepare scientific and technological progress plans and annual plans, and organize their implementation; strengthen the construction of scientific and technological teams, and be responsible for organizing technical training for engineering and technical personnel.

5. Organize the preparation and review of mine geological exploration plans and designs, geological reports, and major technical plans and designs such as mine construction and technical transformation. Organize research and solve major technical issues such as rational development of resources, connection of mining, rational centralized production, and deep processing of coal.

6. Organize the formulation and approval of mine safety technical measures, disaster prevention and treatment plans, and check and record the implementation progress of technical measures to control major safety hazards such as gas, water damage, fire, etc.

7. Organize technology development, learning, and introduction of advanced foreign technologies; organize scientific and technological exchanges and technical research; carry out technological updates and rationalization suggestions; promote new technologies, new processes, new equipment, and new materials.

8. Organize regular technical work meetings, organize the deputy chief engineer to solve major technical problems in all aspects, propose plans and implementation details for mine technical management, technology development and scientific research results declaration, etc., and arrange Implementation by relevant departments.

9. Responsible for the technical work of the "one supply and three defenses" and the "three preventions" in the rainy season, organizing the preparation of the "one supply and three defenses" disaster prevention and treatment plan, and on-site command of the "one supply and three defenses" major safety hazards Eliminate work. 10. Review and sign the design, procedures, safety technical measures of new work items and supplementary work items in use, and review and sign ventilation gas daily reports. ;