Which aluminum alloy door and window manufacturer in Wuhan has a good reputation?

Wuhan aluminum alloy doors and windows maintenance has a coup

1. aluminum alloy doors and windows should be used lightly and pushed and pulled naturally; When you find difficulties, don't force them, you should troubleshoot them first. Dust accumulation and deformation are the main reasons why aluminum alloy doors and windows are difficult to pull. It is necessary to keep the door frame clean, especially the push-pull slot clean. The vacuum cleaner can suck away the dust accumulated in the groove and top of the door sealing strip.

2. When cleaning aluminum alloy doors and windows, people should not step on the aluminum frame or pull the frame to support it.

3. Aluminum alloy doors and windows can be dipped in water or neutral detergent with soft cloth. Don't use ordinary soap and washing powder, and don't use strong acid and alkali cleaners such as decontamination powder and toilet cleaner.

4. After the rainy day, dry the wet glass and door window frame in time, and pay special attention to wipe the water in the chute. If the chute is used for a long time, the friction will increase. You can add a little oil or coat it with wax oil.

5. Always check the connecting parts of aluminum alloy frame, tighten the bolts in time and replace the damaged parts. Locate the vulnerable parts of aluminum alloy doors and windows, such as shaft pins, wind struts and ground springs, check them from time to time, and add lubricating oil regularly to keep them clean and flexible.

6. Sealing roof and glass glue seal are the key structures to ensure the sealing and heat insulation of doors and windows. If it falls off, it should be repaired and replaced in time.

7. Always check the joint of aluminum alloy frame and wall. If it is loosened for a long time, it is easy to deform the whole frame and make the doors and windows unable to be closed and sealed. Therefore, the loose screws at the joint should be tightened immediately. If the screw base is loose, use a small amount of cement to seal it.