What are the conditions for raising deer?

1. Site selection: dry terrain, sandy or stony shape in the south or southeast with a slope of 5 shall be selected. 2. Feeding conditions: It is best to choose a place with abundant grass all year round, good environmental protection, less pollution and low noise. 3. Water source conditions: Before the construction of the deer farm, the groundwater level, natural water source, water quantity and water quality of the deer farm should be surveyed and investigated. 4. Feeding principle: give priority to green roughage, supplemented by concentrated feed, and make full use of local feed resources with low price, large quantity, wide source and stable supply. 1. What are the conditions for raising deer? 1. The location must be a sandy or stony place with dry terrain, and it is inclined to the south or southeast by 5 degrees. If it is a mountainous area, you can choose a place that is not threatened by mountains and rivers, sheltered from the wind and well drained. 2. Feeding conditions can be selected in places with abundant grass all year round, good environmental protection, less pollution and low noise. A fully captive sika deer needs an average of 350-400 kg of concentrated feed and 1750-2000 kg of roughage every year. 3. Water source conditions Before establishing a deer farm, we must check and investigate the groundwater level, natural water source, water quantity and quality, and pay attention to the inorganic salt content in the water. No surface natural water sources such as rivers or polluted water sources near the site shall be used. 4. Feeding principle (1) When feeding, green feed and roughage are the main feed, supplemented by concentrated feed, and various local feed resources with low price, large quantity, wide sources and stable supply can be utilized. (2) The feeding amount must be appropriate each time. If the feeding amount is insufficient, the deer will easily get hungry, which will not only make it impossible to rest quietly, but also affect its digestive function. (3) Overfeeding every time will not only cause feed waste, but also affect the appetite of sika deer in the next feeding. 2. What are the procedures for raising deer? 1. Before feeding, you must go to the local forestry bureau to apply for a license for domestication and breeding of wild animals. Breeding can only be carried out after the approval of the forestry bureau at the next higher level. The materials that must be prepared for certification include a copy of the company's business license, a certificate of the legal source of imported deer, a certificate of the fixed place for raising deer and the qualification certificate of technicians, relevant facilities and equipment for raising deer, and a certificate of the source of feed for deer herds in the breeding place, etc. 2. Before the introduction, rural farmers can go to the town or village to consult whether there are subsidies. If there are subsidies, they can apply according to the relevant requirements. If you want to breed in partnership with others, you can first give the cooperative a name, then prepare the identity certificate and partner ID card issued by the village and apply to the local industrial and commercial bureau. 3. It is necessary to strengthen the domestication of deer during breeding, enhance its docility and prevent mechanical abortion. We must improve the living environment of the doe, remove the accumulated ice and snow in the deer shed in time, and prevent the deer from slipping and miscarriage. You can drive the doe 1-2 hours regularly every day, whether in the shed or in the field.