Electrician Safety Production Responsibility Letter

Electrician Safety Production Responsibility Letter (Selected 5 articles)

In many situations in life, we will come into contact with responsibility letters. Responsibility letters can help enhance our awareness of market competition. , responsibility awareness and safety awareness. Does anyone know the format of the letter of responsibility? The following is the electrician safety production responsibility letter (selected 5 articles) that I have carefully compiled. It is for reference only. Everyone is welcome to read it.

Electrician Safety Production Responsibility Letter 1

In order to better implement the company's safety policy of "safety first, prevention first", strengthen the safety management of projects under construction, and improve the safety of all employees Safety awareness, building owner-satisfied projects. To ensure the realization of the overall safety work goal of the headquarters in 20xx, the project will eliminate the occurrence of accidents involving fatalities and serious injuries. A "Safety Guarantee Responsibility Letter" is specially formulated. Combining responsibilities and rights, paying equal attention to rewards and punishments, and combining the actual conditions of this bidding section, the post safety responsibilities, rewards and punishment standards are determined as follows:

1. Job responsibilities:

Responsible for the electrician work of the headquarters .

2. Responsibility requirements:

1. Non-professional electricians are not allowed to operate electrical equipment. Electricians must hold a valid and valid operating certificate and pass the assessment before they can start working.

2. Indoor lighting circuits should be fixed with porcelain clips.

3. Non-electricians are strictly prohibited from disassembling and assembling electrical equipment.

4. When wiring various wires, insulated wires and porcelain clips, porcelain tubes, and porcelain bottles with corresponding voltage levels should be used.

5. The wire joints should be firm and wrapped with insulating tape. They cannot be dragged on the ground and must be hung in the air by wooden poles.

6. Fuses should be installed according to the electrical load.

7. The location, spacing, and height of wires installed on the construction site must meet the requirements of the power department.

8. The transformer and power distribution equipment in the construction site should have complete shielding devices. Transformers installed outdoors and indoor transformer and power distribution equipment should be equipped with screens and fences. And there should be obvious warning signs.

9. The installation of electric lines on the construction site should be carried out according to standards. It is strictly forbidden to tie the lines to wooden piles, trees and iron frames without porcelain clips.

10. All knife switches installed in the open air should be placed in an iron panel box and provided with a rain shelter. A leakage protector must be installed and locked.

11. The wires and cables pulled at the construction site must be hung at a certain height according to regulations and are strictly prohibited from being placed on the ground.

12. The metal casings and brackets of electrical equipment, distribution boards, etc. should all have reliable grounding devices. The fuse switch in the circuit must comply with the electrical standards. The switch that is directly operated by hand must have a complete insulating shell.

3. Reward and Punishment Standards:

1. Reward Indicators:

For outstanding political achievements and safety and no accidents within the scope of responsibility throughout the year, a one-time reward of XXX yuan will be given.

2. Punishment indicators:

After review by the production safety leading group of the headquarters, those responsible for causing safety accidents will be dealt with according to the production safety reward and punishment system of the headquarters.

In the spirit of the relevant documents, combined with the actual situation of our mine, the 20xx annual "Safety Production Responsibility Letter" was signed for the safety production management personnel and special types of workers. The purpose of signing the safety production responsibility letter is to further clarify their respective responsibilities, in terms of safety In terms of production management, we should ensure that everything is managed horizontally and vertically, and everyone is responsible at every level to ensure safe production in 20xx. The job safety production responsibilities are as follows:

1. Strictly follow the requirements of the "Procedures" and be responsible for the daily maintenance of underground electrical appliances, handle underground mechanical and electrical failures in a timely manner, and ensure the normal operation of production.

2. Actively participate in various safety and technical trainings, continuously improve their technical capabilities, and achieve "three knowledges and four skills" (knowledge of performance, structure and safety devices) of underground power supply systems and equipment. ;Know how to operate, know how to maintain, know how to maintain, and know how to troubleshoot).

3. Supervise the work station, strictly implement the handover system, strictly follow the "Procedures" to stipulate the stop and power supply system, and make a record of the main fan's stop and power supply, and check that the main fan is operating normally. , report to the mine manager on duty to ensure that the underground power supply system and electrical equipment are in good condition at all times.

4. When overhauling electrical equipment underground, live work is strictly prohibited.

5. Strengthen patrol inspections of underground electrical appliances and power supply systems, eliminate hidden dangers in a timely manner, and deal with problems quickly, accurately, and standardizedly. If you encounter problems that cannot be handled, you must report them to the shift monitor and safety officer in a timely manner.

6. Carefully fill in various pictures, cards, tables, and boards, and make relevant records.

Matters not covered in this responsibility letter shall be implemented in accordance with the "Coal Mine Safety Regulations".

Responsible person: xxx

Legal representative: xxx

Electrician’s Safety Production Responsibility Letter 3 on XX, XX, XXXX

A Party: ___________ (hereinafter referred to as Party A)

Party B: ___________ (hereinafter referred to as Party B)

In accordance with the requirements of relevant national safety regulations and the actual situation of our company, we will conscientiously implement Order "61" As well as the policy of "safety first, prevention first" and the principle of "whoever is in charge, who is responsible" and "whoever is in charge must focus on safety", implement the safety responsibility system. In order to ensure construction safety and prevent accidents, both parties A and B must perform The following terms:

1. Party A will fully cooperate with the safety and security work of this project, and at the same time supervise and inspect Party B’s safety and security work, and take ownership of any violations, violations, and safety hazards discovered during the inspection. Party B is required to make rectifications.

2. Party A shall notify Party B in writing of any problems discovered during the inspection as required by the company and keep them on file for future reference.

3. Party A has the right to punish Party B for the “three violations” in accordance with relevant management regulations.

4. Party A should promptly report the behavior of ignoring the safety management of the decoration project to the company for handling.

5. Party B must have a clear legal safety responsible person, who is responsible for the safety and public security of the construction project, and achieves "five simultaneous" construction and safety.

6. Before entering the construction site, Party B must handle registration and access permit procedures for construction workers, and designate a dedicated person to carry out inspections. No one without a permit is allowed to enter the construction site.

7. Before construction workers take up their posts, Party B must be responsible for providing safety education to them, clarifying relevant safety regulations and work requirements, and consciously abiding by the safety management system.

8. Party B must have full-time or part-time security officers during the construction, who are specifically responsible for implementing safety and security precautions during the construction.

9. The flammable, explosive and dangerous goods used by Party B during construction must be limited and a designated person shall be designated to be responsible for safety management.

10. Party B’s use of fire, electricity, and welding during construction must be approved by Party B’s on-site person in charge, and the technical specifications and operating procedures for fire, electricity, and welding must be strictly implemented to ensure nothing goes wrong. (Oxygen bottles and acetylene bottles must not be turned upside down, and have shock-absorbing rings. The number used is strictly controlled. The distance between them should be greater than 5 meters, and the distance between open flames and acetylene bottles must be greater than 10 meters. There are dedicated personnel to eliminate flammable materials, and fire extinguishers are placed on site. Leave someone on duty and confirm that there are no problems before leaving).

11. Party B’s electricians and electric (gas) welders must have a valid "Special Industry Personnel Operation Certificate" issued by the labor department before they can operate in accordance with the requirements of the construction site specifications.

12. Party B must strictly carry out construction in accordance with the national industry safety construction regulations for construction and decoration, and resolutely put an end to the "three violations".

13. When Party B uses large-scale equipment during construction, it must fully consider the load-bearing and earthquake-proof capabilities of the floor. It can only be used under the premise of ensuring safety. Illegal command and risky operations are strictly prohibited.

14. Party B must erect safety protection x for holes that are dangerous during construction (passage entrances, elevator entrances, reserved entrances, stairwells, etc.), and safety ropes must be tied when working at heights.

15. Smoking, using open flames, leaving construction workers behind, and using electric water heaters are strictly prohibited in the decoration area.

16. It is strictly prohibited to pile up large amounts of waste materials in the construction area for a long time and block evacuation channels. They must be removed once a day. In particular, empty bottles such as glass glue and paint must be properly disposed of.

17. Party B must strictly manage the construction site, and designate a dedicated person to be responsible for the safety management of construction site equipment, equipment, tools, and materials.

18. Party B must equip the construction site with fire-extinguishing equipment that meets specifications and standards to ensure the safety of the entire construction process.

19. If Party B neglects safety and security management or violates the provisions of the contract and causes accidents or cases, Party B shall bear full responsibility. Party B shall bear all the economic losses and political impacts caused to Party A.

20. This letter of responsibility will take effect from the date of signature and will become invalid after the project is accepted and accepted. It is made in duplicate, with the owner and the construction unit each holding one copy.

Party A: ___________

Party B: ___________

Electrician’s Safety Production Responsibility Letter 4 on _________year____month____

< p> According to the "Work Safety Law of the People's Republic of China and the State", in order to ensure the implementation of safety production in the company, a safety production responsibility system has been established. The responsibilities for safety production in this position are clearly defined as follows:

< p> 1. All electrical circuits and power supply and distribution equipment must be reasonably designed, installed correctly, and used in accordance with regulations.

2. The installation and maintenance of electrical equipment, and the connection and removal of wires must be carried out by full-time electricians, and no one is allowed to operate without permission.

3. For employees who come into contact with electrical equipment, it is necessary to strengthen education on safe use of electricity to avoid electric shock and fire accidents caused by improper use.

4. For electrical equipment, inspection and maintenance should be strengthened to prevent fire and explosion.

5. Regular inspections and replacement of electrical circuits are required to prevent leakage and short circuits caused by corrosion and aging circuits.

6. In flammable and explosive places, explosion-proof electrical appliances, switches and lamps must be selected according to regulations, and the lines must be laid in protective casings.

7. Temporary use of electricity must be approved by the safety department and can only be carried out after obtaining a temporary power license in accordance with regulations.

8. Set up lightning protection devices and grounding devices for conducting static electricity in accordance with regulations, and conduct regular calibrations to ensure they meet safety requirements.

9. The power supply (distribution) room must be tight to prevent outsiders from entering, to prevent small animals from entering and causing short circuits, and to prevent rainwater leakage.

10. When an electrical fire occurs, the power supply should be cut off first and then put out. It is strictly prohibited to use foam fire extinguishers when putting out fires. Dry powder fire extinguishers and carbon dioxide fire extinguishers can be used.

11. All electrical maintenance must be carried out without power, and a sign saying "It is forbidden to close when someone is working" should be hung on the power switch handle. Live work is generally prohibited. When live maintenance is necessary, it must be approved by the leader and reliable safety measures must be taken. The maintenance personnel and guardians must be electricians with practical experience. Otherwise the job will not be allowed.

12. Electrical workers should wear labor protection equipment as required and correctly use electrical tools and fire-fighting equipment that meet safety requirements when taking up their duties.

13. Electrical operating personnel should strictly implement the operation ticket, work ticket system, work permit system, and work supervision system.

14. Frequently inspect the electrical equipment in operation and monitor the operation of the equipment; promptly rectify or report hidden dangers if found.

15. When using hand-held lamps and entering confined spaces to use electricity, low-voltage electricity (36 volts) must be used in accordance with regulations. Under special circumstances, 12-volt low-voltage electricity must be used.

12-volt low-voltage electricity must be used.

16. When replacing a fuse, the fuse must be selected in strict accordance with the regulations, and other metal wires must not be substituted arbitrarily.

This responsibility letter will take effect after signing. The person responsible for safety production has understood the above safety production responsibility requirements and promised to be responsible for safety accidents in the management area. If a safety accident occurs due to poor operation, Willing to assume corresponding legal responsibilities.

1. For those who neglect their duties or work irresponsibly and cause certain consequences, the company will deal with them seriously according to the severity of the case until they are held criminally responsible.

2. If major safety hazards in the area cannot be rectified in time or cause major safety accidents due to ineffective work, the relevant responsible personnel will be given administrative sanctions in accordance with the State Council's "Regulations on Administrative Liability for Extraordinary Safety Accidents" ; If it constitutes a crime, criminal responsibility shall be pursued in accordance with the law.

xxx

Electrician’s Safety Production Responsibility Letter 5 on xx, xx, 20xx

In order to implement the "Safety Production Law" and "Safety First, Prevention First "" policy, enhance the sense of safety responsibility of all units and all employees of the company, firmly establish the awareness of safety responsibility, eliminate all kinds of hidden safety hazards to the greatest extent, and nip all accidents and signs in the bud. In order to implement responsibilities at all levels, prevent accidents, resolutely curb the occurrence of serious and extremely serious accidents, achieve "safe production, alarm bells ringing", and ensure the smooth progress of all the company's work. To this end, the company's production safety leading group signed a safety responsibility letter with the company's subordinate units as follows:

1. Goal of eliminating liability for employee casualties

(1) Strictly prohibit work-related deaths and serious injuries Disabled accidents (including those with a work-related injury reimbursement amount exceeding 5,000 yuan);

(2) Work-related injury accidents (work-related injury reimbursement amounts between 200 yuan and 5,000 yuan) for employees in this department shall not exceed 1 person (including injuries due to injuries) Those who need to stop work and rest after being identified by the hospital), have less than 3 minor work-related injuries (reimbursement amount is less than 200 yuan); no more than 1 security incident (company and personal theft, and other disputes);

2 , Responsibility goals for strictly preventing fire accidents

(1) Each unit of the company shall not have a fire accident with a direct economic loss of more than 1,000 yuan;

(2) Each unit shall have no more than one fire incident. /year (the fire was put out quickly, no one was injured, and there was no direct loss).

(3) Prevent accidents involving serious injuries or more, and prevent major fire, combustion and explosion accidents.

3. Safety responsibilities of electricians

(1) Learn and be familiar with safety technical operating procedures, abide by national laws and regulations, and implement the superior power specifications and technical requirements.

(2) Actively participate in various safety production activities, accept various safety educations, abide by rules and disciplines, do not violate labor disciplines, stick to their jobs, do not skip work, do not leave work, do not work after drinking, and concentrate Work.

(3) Earnestly study the electrical safety technical operating procedures and know what you need to know. Be familiar with safety knowledge, operate according to regulations, do not work in violation of regulations, do not take risks and act recklessly, and have the right to refuse instructions that violate regulations.

(4) Adhere to the daily inspection system. For leakage tripping devices and electrical equipment, especially mobile and hand-held power tools, lights, and floor mopping cables, safety inspections must be carried out regularly to eliminate unsafe factors. They must be inspected and accepted to meet safety requirements before they can be delivered for use, and the electrical equipment must be inspected. Regular maintenance.

(5) Improve your own technical and professional skills, be responsible for your work, do not work sloppily or haphazardly, frequently check the electricity usage during construction, make timely improvements and rectifications, use electrician labor protection supplies correctly, and be neatly dressed , wear insulated shoes, wear a safety helmet, get ready for work, and wear seat belts when working at high altitudes or in dangerous places.

(6) Live work and risky work are strictly prohibited, and hidden dangers must be rectified immediately. No hidden dangers must be rectified or reported without rectification or reporting. Hidden dangers raised by the examination committee at all levels shall be rectified in a timely manner as required.

(7) Implement civility and do not throw objects from high places. Used wires should be recycled promptly and properly kept. Lines should be set up in a standardized manner. Distribution boxes and switch boxes should be locked in a timely manner and electricity signs should be clearly visible.

(8) Operating procedures must be strictly followed during power outages. Special personnel must be responsible for power outages and power transmission. The power outage switch must be locked, and warning signs such as "Someone is working" and "Power transmission is strictly prohibited" must be hung on the switch. , it is strictly prohibited to work with electricity on.

(9) During a power outage in the factory area, precautions must be taken to prevent safety accidents such as power replacement during power generation to prevent safety accidents.

4. The company’s rewards and punishments for the safety work assessment of each unit

(1) The company’s production safety leading group shall, based on usual or monthly safety production inspections and accident records, conduct According to the "Company Safety Assessment and Evaluation Rules", before January 20 of each year, the safety production of each unit in the previous year will be summarized and evaluated, and safety awards will be issued to better units at the end of the year, and mobile red flags will be issued to "Advanced Units in Safety Production".

(2) If one or more major accidents occur during the year, and the person responsible for serious dereliction of duty (causing death, injury, disability, or major economic losses) will be removed from his or her responsible position depending on the circumstances, or Pursuing corresponding responsibilities:

1. If relevant safety management regulations are violated, the responsible person will be subject to administrative and economic penalties and criminal liability will be investigated;

2. Responsibility time of this responsibility letter It is from January 1, XXX to December 31, XXX.

XXXXX New Energy Vehicle Co., Ltd.:

Responsible unit:

Responsible person of the safety production management team:

Signature of the responsible person: < /p>

　XXXX year XX month XX day;