What are the specifications of scaffolding steel pipes?

The specific specifications of scaffolding steel pipes are as follows:

The steel pipes should be Q235 ordinary steel pipes specified in the national standard GB/T13793 or GB/T3091, and the model should be Φ48.3×3.6mm ( The plan is calculated based on Φ48×3.0mm). The product certificate must be provided and accepted when the material comes into the site. It can be put into use only after it is qualified.

Extended information:

Steel pipe material requirements: The steel pipe should be Q235 ordinary steel pipe specified in the national standard GB/T13793 or GB/T3091, and the model should be Φ48.3×3.6mm ( The plan is calculated based on Φ48×3.0mm). The product certificate must be provided and accepted when the material comes into the site. It can be put into use only after it is qualified.

The outer protection of the scaffold must be closed with a qualified dense-mesh safety net. The company logo ("Company" banner) and promotional slogans should be installed on the outer shelf. Ensure that the outer frame is coordinated and beautiful, reflecting the characteristics of the enterprise.

The scaffolding foundation should be flat, compacted, and the concrete should be hardened. The foundation should be hardened with 100mm thick C25 concrete, and a base or pad should be set at the bottom of the pole. The backing board should be made of wood with a length of not less than 2 spans, a thickness of not less than 50mm, and a width of not less than 200mm.

Baidu Encyclopedia-Scaffolding