Does anyone have the rules and regulations for furniture factories? Thank you.

Article 1 General Principles

1. In order to strengthen the company's safety precautions, protect corporate property and employee lives, and ensure the smooth progress of all work, this system is formulated.

2. The company adheres to the policy of "Production must be safe, safety is for production" and implements safety management in an all-round way.

Article 3 Fire Prevention Knowledge

1. Strengthen the management of various flammable substances. Flammable substances must be properly stored and kept away from fire sources.

2. Take fire prevention technical measures, such as setting up firewalls.

3. Equip fire-fighting facilities, such as fire hydrants, fire-fighting water sources, sand boxes, dry powder, carbon dioxide fire extinguishers or foam fire extinguishers, etc., which must be checked frequently and replaced regularly to keep them in good condition.

4. Carry out mass fire-fighting activities.

Article 4: Knowledge on preventing electric shock

The main measures to prevent electric shock are to strengthen management and strictly prohibit illegal operations.

1. The selection and installation of various electrical equipment must comply with safety technical regulations and ensure that the protective grounding or protective zero connection of the equipment is good.

2. Electrical equipment should be inspected regularly and maintenance records should be kept. Aged or exposed wires should be replaced in a timely manner, temporary and abandoned lines should be removed in a timely manner, and the terminals should be wrapped with insulation.

3. Establish safe operating regulations and responsibility systems for electrical equipment, strictly prohibit illegal operations, and strictly prohibit non-professionals from operating or repairing electrical equipment without authorization.

4. When repairing electrical equipment, disconnect the power supply and wear insulating clothing.

5. Organize employee training to master first-aid measures and techniques for electric shock victims.

Article 5 Accident handling: Accident handling is a general term for a series of tasks including emergency handling after an accident, reporting to relevant departments, conducting investigation, analysis and statistics, taking measures and punishing relevant units and personnel.

Article 6 Emergency Treatment after an Accident

Accidents are often sudden, so you should keep a clear head after an accident and do not panic or mishandle it. Generally, the processing is in the following order:

1. First, cut off the relevant power sources, such as gas source, power supply, fire source, water source, etc.

2. Rescue the injured and dead, and apply first-aid bandaging to the seriously injured.

3. Roughly estimate the cause and scope of the accident.

4. Report and call for assistance in a timely manner while preventing the accident from expanding and minimizing losses.

5. Take fire extinguishing, water blocking, diversion, cooling and other measures to terminate the accident as soon as possible.

6. After the accident is over, the scene must be protected.

Article 7 Accident Investigation, Analysis and Handling

The basic purpose of investigating, analyzing and handling casualty accidents is to find out the causes, identify responsibilities, take measures and eliminate hidden dangers , learn lessons and improve work.

Article 8 Safety Inspection

1. Check whether safety education is provided.

2. Check whether the safety operating procedures are publicly displayed or placed.

3. Check whether safety work is arranged when arranging production tasks.

4. Check whether safety protection, insurance, alarm, first aid devices or equipment are complete.

5. Check whether personal protective equipment is complete and used correctly.

6. Check whether the work connection and cooperation are reasonable.

7. Check whether hidden dangers of accidents exist.

8. Check whether the safety plan measures are implemented and implemented.

Article 9 Key Points for Self-Safety Inspection

1. Check the safety of the work area: pay attention to the sanitation of the surrounding environment, smooth process channels, stable ladder frames, and smooth floors and work surfaces.

2. Check the safety of the materials used, whether there are breaks or burrs in the materials, and pay attention to stacking and transportation methods.

3. Check the safety of the tools: pay attention to whether they are complete, clean, damaged, and have any special usage regulations, operating methods, etc.

4. Check the safety of the equipment: pay attention to the integrity of the protection, insurance, alarm devices, and control mechanisms.

5. Check the safety of other protections: ventilation, heatstroke prevention and cooling, warmth preservation, whether protective equipment is complete and used correctly, whether there are fire-fighting and first-aid supplies, etc.

Chapter 2 Security Management System

Article 10 Security work specifically refers to theft prevention, fire prevention and other work to protect the company's interests in the company's office area.

Article 11

The company implements a holiday duty system. The office is responsible for the monthly duty arrangements and supervision. Personnel on duty must arrive at work on time and conscientiously perform duty duties and inspect Whether each department implements various safety systems and safety operating procedures.

Article 12 The person on duty at night is responsible for opening and locking the door every day. Before locking the door at night, the person on duty must carefully check whether the doors and windows are locked and whether the power supply is cut off to ensure that there are no safety hazards.

Article 13 Company employees should properly keep seals, money, valuables, important documents, etc., lock drawers and filing cabinets before leaving get off work, and cut off the power supply before leaving.

Article 14 The office is responsible for organizing relevant personnel to supervise and inspect the safety of the company’s office environment from time to time. If there are any safety hazards, the corresponding departments must promptly rectify them.

Article 15 A set of door lock keys for the company's office area should be backed up in the office before use. The office must be properly kept in case of emergency use.

Chapter 3 Measures for Dealing with theft of Property

Article 19 After the theft of property occurs in our company, the relevant personnel must arrive at the scene as soon as possible to check whether there are any obvious signs on the door. Signs of damage or being pried open by a hard object.

Article 20 After opening the door and entering the room, you must check whether the things in the room are messy and whether the luggage, suitcases, and cupboards have been pried open.

Article 21 Do not move on-site furnishings or touch any objects. The site should be sealed off immediately and no one is allowed to enter.

Article 22: Observe the presence or absence of suspicious persons, and record the value of stolen items, time of theft, etc.

Article 23: After investigators arrive at the scene, they should actively assist them in their work to conduct internal investigations.

Article 24: Investigate and take confessions from personnel of various departments involved, and conduct strict investigations on key locations and individuals.

Chapter 4 Fire Safety System

Article 25 The company’s fire safety work implements the policy of “prevention first, combining prevention and firefighting” to nip problems in the bud.

Article 26 The head office, branches and various departments shall implement a safety responsibility system and set up fire prevention responsible persons.

Article 27 In order to ensure the implementation of various fire safety measures, the company has established a fire safety leading group to be responsible for the company's fire safety work. Each branch has established a corresponding fire safety leading group.

Article 28 Each branch company must establish a voluntary fire brigade. In the event of a fire, efforts must be made to control the spread of the fire or put out the fire at the initial stage.

Article 29 All departments must strictly implement the relevant fire prevention regulations promulgated by the national and municipal fire protection agencies in production and work, and take specific measures based on their own actual conditions.

Article 30: Improve the level-by-level inspection system to promptly discover and eliminate fire hazards.

Article 31 Fire-fighting facilities must be inspected at any time to ensure their effectiveness.

Article 34

Anyone who discovers a fire hazard must promptly and accurately report the alarm (119) to the office security department or fire department and actively put out the fire. After receiving a fire alarm, the unit should promptly organize forces and cooperate with the firefighting agencies to put out the fire.

Article 35 Rewards

1. Those who insist on implementing fire safety rules and regulations, dare to fight against violations, and ensure production safety will be rewarded 20-50 yuan;

2. Those who are not afraid of danger, have the courage to eliminate hidden dangers, prevent fire and explosion accidents, put out fires in time and reduce losses, will be rewarded 100-1,000 yuan.

Article 36 Penalties:

1. Anyone who ignores fire safety work, violates relevant fire regulations, and refuses to comply even after being pointed out will be fined 200 yuan per time.

2. If a fire accident is caused by dereliction of duty, the person directly responsible shall be held accountable for financial compensation and shall be fined 200 yuan per time. If the circumstances are serious and violate the criminal law, they will be reported to the judicial authorities for criminal liability, and the person responsible for fire prevention in the department will be fined 200-1,000 yuan.

Chapter 5 Emergency Handling Regulations

Article 37 This regulation applies to all employees of the company’s headquarters and employees of all overseas offices.

Article 38 Emergencies mainly include serious illness, injury or death of employees, major criminal cases, vicious family disputes, etc. They are characterized by suddenness and particularity.

Article 39 Emergency handling procedures

1. Once a major emergency incident occurs, the parties or insiders must report it to the relevant management department and the company office. The office will work with relevant management departments to solve the problem. During the resolution process, when it is necessary to ask for help from relevant departments of the company, the relevant departments should actively cooperate and support without shirk and delay.

2. When time does not allow, the office can handle the incident directly by reporting and handling at the same time.

3. In case of emergency, the company office has the right to mobilize all necessary resources of the company; after having full authority to deal with it, it will make an experience summary. If there are deviations, lessons will be learned when dealing with similar incidents next time.

4. In the process of handling major emergencies that involve people and things outside the company, the company office will handle external negotiations.

5. Incident reports, requests for instructions and subsequent result reports of major emergencies shall be reported uniformly to the company leaders by the office.

Article 40 Summary of experience and lessons learned and document management

1. Investigate and analyze the causes of emergencies. If necessary, report the analysis report to relevant personnel to learn lessons. .

2. Carefully summarize the understanding of handling policies and the company's organizational intentions for reference by other managers.