Joke Collection Website - Bulletin headlines - What is the safety management goal of municipal road engineering?

What is the safety management goal of municipal road engineering?

The safety management goal of municipal road engineering is very important. In the process of project construction, the implementation goals are set for people, and every detail is handled with care. Zhong Da Consulting will explain to you the safety management objectives of municipal road engineering.

In order to implement the policy of "safety first, prevention first, comprehensive treatment", effectively prevent the occurrence of major and extraordinarily serious safety accidents, avoid and reduce the occurrence of various accidents, implement the responsibility system for production safety, and formulate the safety production objectives of this project according to national regulations, laws and relevant safety production management regulations.

First, the goal of safe production

1, put an end to personal injury accidents, and control the index of minor injury rate at 0.3%;

2. Ensure a safe, civilized and standardized construction site in Zhengzhou;

3. The rectification rate of potential safety hazards is100%;

4, to achieve no major equipment accidents, no major fire accidents, no major traffic accidents, no multiple acute poisoning accidents.

5, a provincial civilized construction site, provincial quality project.

6. Seriously implement the China Construction Safety Production Management Manual and the Atlas of Construction Site Safety Protection Standards, and the qualified rate of standardization of construction site safety protection is100%;

7. The certified rate of safety management personnel is 100%, and that of special operations management personnel is 100%.

Second, the measures of production safety precontrol target

1, safe and civilized construction goal

1. 1, safety construction target

Ensure the construction safety of this project, with no casualty accidents; Ensure that there is no fire and traffic accident in this project; Ensure the safety of the construction equipment of this project; Destroy the ecological environment, no environmental pollution accidents, and the construction site is clean and standardized.

1.2, civilized construction goal

Implement the Interim Provisions of Henan Provincial Government on the Management of Civilized Construction of Construction Projects and the relevant regulations of * * * Municipality on the management of civilized construction of construction projects, so as to ensure that the access to the construction site is the same, without polluting the surrounding environment, disturbing people, raising dust on the service road or standardizing the construction site.

2, according to the target site to develop the following measures

2. 1, safety civilization education measures

The education and training of safety in production on the construction site is the education and training of safety in production for all employees, including the training of project management department, team and other aspects and levels. Through education, all employees can understand the requirements of safe production and ensure the smooth implementation of the safety assurance plan. The main contents of the training are:

(1), safety education content of the project management department.

The safety education content of the project management department should include: safety production laws, regulations, systems and safety disciplines, and explanation of safety accident cases; The characteristics of the construction tasks undertaken; Basic knowledge of building safety, safety production system and safety operation procedures of related types of work; Basic safety knowledge such as the use of mechanical equipment and electrical appliances; Knowledge of fire prevention, anti-virus, explosion-proof, flood control, dust prevention, lightning protection, electric shock prevention, falling prevention, object strike prevention, collapse prevention, mechanical injury prevention and emergency rescue; Distribution standard of safety protective articles and basic knowledge of using protective articles and appliances.

(2), safety team education content.

The contents of security guard education include: the characteristics of security guard work; Safety production system and work discipline; Safety operation procedures; Knowledge of proper use of safety protection devices and personal labor protection articles; Unsafe factors and preventive measures in the work of this team, working environment and safety requirements of machines and tools used.

2.2, civilized construction management measures

2.2. 1, water pollution prevention measures

The sewage produced in the construction process is mainly oily sewage and cleaning sewage. In view of this situation, take effective measures to prevent water pollution. Oily sewage generated in the operation of construction machinery should be treated by measures such as grease trap, and can only be discharged into designated ditches and streams after reaching the requirements of the Comprehensive Wastewater Discharge Standard, and shall not be discharged beyond the standard. Sewage produced by concrete mixing station must be filtered and precipitated before it can be discharged into designated ditches and streams. The mixing station shall be equipped with washable toilets and septic tanks.

2.2.2, gas pollution prevention and control measures

(1), develop liquid fuel, actively use clean energy such as electricity and solar energy, and try to use electrical equipment for hot water and heating. In order to reduce pollution, small boilers and coal stoves are prohibited in the production and life of this project; Both heating and cooking use gas and electricity.

(2) Control dust pollution, cover sand and gravel that are easy to generate dust, and properly sprinkle water on the lanes of passing vehicles; Channel construction, using advanced technology to reduce dust emissions; Adopt sealed mixing equipment and set up dust-proof equipment; Prevent the dust generated by mixing concrete from leaking out; Construction channels and concrete mixing stations should be watered or hardened regularly; Roads in production and living areas should be hardened. According to the overall planning of the construction site, proper greening should be carried out around the production and living quarters.

(3) Control automobile exhaust pollution, strictly implement the system of vehicle elimination and scrapping, select vehicles that meet the national health protection standards, strictly control automobile exhaust emissions, and ensure that the automobile exhaust on the road fully meets the standards. The most serious air pollution in the construction process is the construction workers. For construction workers, we take protective and labor protection measures to reduce their injuries.

2.2.3, noise prevention and control measures

The radiation of sound is directional. At the same distance from the sound source, the received noise intensity is different because it is in different directions of the sound source. Therefore, controlling the propagation direction of noise (including changing the emission direction of sound source) is an effective measure to reduce noise, especially high-frequency noise. Establish a sound barrier, and use sound insulation materials or structures according to the conditions of the construction site to block the spread of noise. For the noise generated by vibratory roller, vibration isolation measures are taken to reduce the noise. Deal with all kinds of relationships with the local government and residents, and don't let the construction affect the normal work and rest of residents. Restrict transport machinery from whistling for no reason to reduce noise pollution.

2.2.4, solid waste prevention and control measures

Garbage bins are set in the production and living quarters to store domestic garbage, which is transported to the designated garbage disposal station by garbage trucks for treatment. Garbage is divided into degradable garbage and non-degradable garbage, and then reused and treated separately. In the process of construction, do a good job of waste residue treatment, and recycle the waste, leftover materials, packaging bags, etc. Timely transport the treated garbage to the designated garbage dump and bring it into the local health management system. Prevent the random dumping of slag, reduce the flood discharge capacity of rivers and affect the normal production and domestic water consumption of residents.

2.2.5, ecological environment protection and soil and water conservation measures

Protect the green vegetation on the construction site, the construction operation shall not damage the greening facilities, and arrange greening in warm season. Expand the greening scope as much as possible, make full use of the existing space, and make the greening layout integrated and hierarchical. Plant dust-resistant tree species in the living area and production area, plant flowers, shrubs and turf in the living area, and take timely measures of shotcrete and anchor support and drainage for the slope excavated during construction to prevent soil erosion. After the completion of the construction (unless otherwise specified by the Owner), the ecological environment near the construction site should be restored as much as possible.

2.2.6, the construction site treatment measures

For roads with heavy dust, water is often sprinkled to prevent dust. During the construction of Yongdeng Expressway underpass, water spraying and dust prevention measures are taken to sprinkle water on the excavation face, and publicity boards with a certain height are set on both sides of the diversion to prevent dust and glare and ensure the smooth running of high-speed vehicles.

2.2.7, road cross transportation nuisance prevention and control measures

During the construction, local traffic will not be interrupted. Vehicles and pedestrians at intersections along the route need to maintain traffic, and the roads used by domestic vehicles, production vehicles and material supply vehicles will inevitably conflict with nearby municipal roads. In order to alleviate the traffic pressure at intersections, certain measures are taken to set up unified safety warning signs at intersections, keep the construction warning signs illuminated, and assign special personnel to maintain traffic when necessary. The construction access road shall not interrupt the local drainage and irrigation system, communication and power facilities.

2.2.8, occupational health and safety protection measures

(1), buy personal accident insurance for employees to ensure their personal interests.

(2), organize employees to carry out health care knowledge education on a regular basis, regular physical examination.

(3) Establish good relations with * * * People's Hospital and * * * Chinese Medicine Hospital, and try to get the best medical service from the hospital when employees need to be transferred to local hospitals for treatment due to injuries.

(4), set up a shower room, ensure that employees have the conditions to take a bath every day.

(5) When an infectious disease occurs, the patient shall be treated in isolation according to the relevant provisions of the state, and preventive measures shall be taken for other personnel.

3, the project department safety civilization construction reward and punishment system

3. 1, in order to effectively grasp the safety management of this project, protect the safety and health of employees in the production and construction process, prevent all kinds of accidents, protect the project property from loss, ensure the smooth, stable and long-term operation of the project, improve economic benefits, improve the safety awareness and enthusiasm of employees in the construction process, further expand the popularity of China Construction * *, and protect the qualification and image of enterprises, this safety management reward and punishment regulation is specially formulated.

3.2. Establish and improve the safety management network. From the project department to the construction subcontractors, from the subcontractors to the construction team, a top-down safety management network is established to form a good atmosphere for safety management and safety work. The project department, subcontractors and the construction team should gradually be equipped with full-time and part-time safety officers to pay special attention to the safety work in construction. It is necessary to form a safety management mode in which individuals are responsible for the team, the team is responsible for subcontractors, subcontractors are responsible for the project department, and the project department is responsible for the company. Make it clear that the project manager is the first person responsible for the safety of the project department, and ensure that no major equipment accidents, major personal injury accidents, major fire and explosion accidents and major quality accidents occur throughout the year (see the classification standards of the Ministry of Labor and Social Security for the size and types of accidents). Strive to avoid general equipment and quality accidents, and control the injury rate of teenagers within 3‰.

3.3. According to the economic benefits of subcontractors and the difficulty of construction projects, the project department will reward subcontractors who have completed all the work with good quality, quantity, quality and quantity throughout the year without accidents such as equipment, personal injury, fire and explosion and qualification. According to the project safety reward and punishment system, the project manager rewards subcontractors and project managers who have made achievements and contributions in safety work throughout the year.

3.4. If the losses of the person in charge of the subcontractors, the parties and the person in charge of the work area with general accidents throughout the year are more than 5,000 yuan and less than (equal to) 654.38+0,000 yuan (losses include medical expenses, damages and lost time, the same below), all bonuses will be deducted, and rewards and punishments will be carried out according to the safety reward and punishment system of the project department.

3.5. If the losses of subcontractors who have more than average accidents in the whole year's engineering construction operations are more than 65,438+00,000 yuan and less than 50,000 yuan, in addition to deducting all bonuses, the person in charge of subcontractors, the parties concerned and the person in charge of the work area will be given an economic penalty of ≤ 65,438+00% (cumulative) of the total accident losses. Losses of more than 50,000 yuan (including 50,000 yuan) to less than 6,543,800 yuan will be compensated by safety award in the completed area, and economic penalties of ≤8% of the total accident losses will be given to the parties and the person in charge of the work area according to the size of the accident; All fines shall be implemented in accordance with the project safety reward and punishment system.

3.6. If a major accident occurs in the whole year and causes losses (the loss exceeds 654.38 million yuan), it will have a certain impact and damage the reputation of * * *. In addition to deducting all safety bonuses of the subcontractor's responsible person, the parties and the person in charge of the work area, the subcontractor's responsible person, the parties, the person in charge of the work area, the person in charge of the safety department and the production manager (safety director) will also be punished.

3.7. In the construction work, if the person in charge of the work area and the person in charge of the subcontractors fail to implement the safety operation measures, and command or operate in violation of regulations, resulting in an accident, in addition to giving the above-mentioned economic punishment to the parties and the person in charge of the subcontractors, according to the size and loss of the accident, they will be investigated for criminal responsibility according to the Law of People's Republic of China (PRC) on Safety in Production.

3.8, in the whole year of engineering construction work, find and avoid major safety accidents or accidents, put forward reasonable suggestions, subcontractors and management personnel who have made special contributions to safety work, the project department will give special rewards according to the safety reward and punishment system.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd