What are the safety signs?

Common safety signs can be divided into four categories: prohibition signs; warning signs; instruction signs; and prompt signs.

1 Prohibition sign

1. The basic form of the prohibition sign is a white rectangular substrate with red writing

A circular prohibition sign with a slash, below The background color of the text auxiliary mark is

black, the font is black, and the words are white.

2. Sign width x height = 400mmx500mm.

3. It is forbidden to customize the content based on the icon.

2 Warning signs

1. The basic form of warning signs is a white rectangular substrate with yellow writing

rectangular rows and black identifier warning signs. Below is a black frame on a white background, with bold black text.

2. Sign width x height = 400mmx500mm.

3. It is forbidden to customize the content based on the icon.

3 Command signs

1. The command sign is a white rectangular substrate with a blue graphic logo

written on it. The identifier is white and the text below The background color of the auxiliary logo is blue

and the font is bold and white.

2. Sign width x height = 400mmx500mm.

3. The command content is customized according to the icon.

4 Safety prompt signs

1. The basic form of the prompt sign is a green square, the identifier is white

and the bottom is bold.

2. Sign width x height = 250mmx250mm.

3. The command content is customized according to the icon.

5 Safety posters

1. Produce posters showing wearing safety helmets at conspicuous locations on the construction site.

2. The recommended total height is 3 x 6m or 4 x 6m (can be scaled in the same proportion).

3. The safety concept is a horizontal banner, suspended on the outer legs of the main structure at a prominent position

The size should be 1 x12m.

4. Use inkjet cloth for production.

6 Public Notices

1. The project leader will bring a Bantu sign and hang it at an obvious location on the construction site, and use acrylic slots to place photos.

2. Width × height = 550mm × 1000mm.

3. Safety Responsibility Notice Boards for Highly Dangerous Projects. When implementing certain projects with higher hazards at the construction site, a "Safety Responsibility Notice Board" must be hung. Public notice boards are hung at construction sites to facilitate public announcements.

4. The project name refers to the name of the sub-project that is more dangerous. The person in charge of the project refers to the main person in charge of the implementation of the sub-projects in this subdivision. The plan preparer and plan approver refer to the preparer and approver of the special construction plan for the sub-projects. The person in charge of inspection and acceptance refers to the person in charge of organizing the acceptance and daily supervision and inspection of the sub-projects.

5. The name and photo of each responsible person should be posted on the public notice board.

6. Safety technical requirements should be concise and focused, and should have corresponding emergency response measures.

7. Publicity sign production size: width × height = 600mm × 1200mm.

8. It can be made of galvanized steel plate, PVC plate or aluminum-plastic plate, with stainless steel edges. The surface layer is made of outdoor car stickers or polycloth spray-painted, and the inner lining is a 10mm square steel frame.

8 Equipment status board

1. Hang on the body of large and medium-sized mechanical equipment at the construction site.

2. The work sign is in white letters on a blue background, and the company name is in black letters.

3. The work sign width x height = 200mm x 150mm; it is made of galvanized iron plate, PVC plate or aluminum-plastic plate, and the surface layer is made of outdoor car stickers.

9 Material identification plates and brackets

1. Material identification plates are used to identify various materials in the material storage yard.

2. The signboard is made of galvanized iron plate or aluminum-plastic plate, with a frame of 20mm, blue edge, white background, and black characters.

3. Signage width × height = 450 × 300 mm.

4. After the raw materials enter the site and are stacked at the designated location, a material identification board is set up in front of the material stacking area (top right picture); after the raw materials are processed into semi-finished products in the workshop, a semi-finished product is set up in front of the semi-finished product stacking area. Processing of signage (below right).

5. Material The signboard bracket is made by welding square steel and channel steel.

6. The dimensions of the signboard bracket are as shown in the figure (unit: mm)

7. The material signboard is used in conjunction with the bracket.

10 Building number and floor signs

1. The building number sign is in a prominent position on the outside of the building.

2. The building number signboard is made of PVC board, and the surface layer is made of outdoor car stickers or stickers.

3. The building number sign is circular, with a diameter of 1000mm, with white characters on a blue background and large black fonts.

4. Floor signboards are hung at the stair landing, on the outside of the safety door of the construction elevator and on the facade of the scaffolding.

5. Self-adhesive production.

6. The floor sign is rectangular, width x height = 400x300 mm.

7. The signboard is white with blue background and large black font.

11 Fire hydrant prompt signs

1. The fire hydrant position prompt sign is hung near the fire hydrant at the construction site to indicate the location of the fire hydrant.

2. Self-adhesive production.

3. The fire hydrant sign is rectangular, width x height = 400m mx25 0m m.

4. The signboard is white with red background and large black font.