Code of practice for forklift trucks-Safety instructions

Scope of application: scope of work: factory internal station: forklift driving area

Please indicate the source of the original reprint of this site, otherwise legal responsibility will be investigated.

Scope of application:

Scope of work: factory internal station: forklift driving area Work content: Use forklift to carry and load goods.

Harm to people and environment:

1. According to the law, you must be trained and certified to operate a forklift.

2. If you don't operate the forklift correctly, you or people around you may be seriously injured or even life-threatening!

3. Strictly abide by the warnings and regulations in the forklift and operation manual.

4. The forklift charging parking area should be well ventilated, because combustible gas will be generated when the battery is charged.

5. Protective measures should be taken when the forklift battery is full of liquid, and protective gloves and glasses should be worn. It is best to equip the site with eye wash water.

Code of practice:

1. When driving a forklift, the driver should fasten his seat belt.

2, don't overload, if not according to the rated load on the lifting table, may lead to rollover.

3, when handling, you must use the pallet, and confirm whether the goods on the pallet are neatly arranged. If the goods are not placed stably,

It's easy to fall and hurt others.

4, pay attention to the safety situation around the forklift, before starting the forklift, confirm that there is no one near the forklift.

5. When checking large items, so that the line of sight is blocked, please back up or ask someone to guide you.

6, turn or through the intersection, should first stop the forklift observation.

7. When driving, be sure to pay attention to the road conditions in all directions.

You must be careful of people near the forklift and make sure they notice your presence before you can continue driving.

8. Before turning, be sure that there is enough swing behind the car and there are no obstacles. A sharp turn during driving will cause the forklift to overturn, causing serious accidents. You should slow down and turn carefully.

9. Pay attention to the space between the gantry, roof guard and ceiling of the forklift, as well as the cross beam at the upper part of the entrance.

And ensure that there is enough height and width to ensure the forklift to pass.

10. Don't push the goods at the fork tip or lift the goods with the fork end.

1 1. It is forbidden to carry people with forks or trays. Please don't use porters instead of balance weights.

12. Never drive at an oblique angle, turn or load or unload goods on a slope.

13. When loading and unloading goods on the truck, be sure to check whether the hand brake of the truck is pulled properly, and put wood blocks on the wheel pads to prevent the truck from moving.

14. When the fork is in a high lifting state, driving is prohibited. When the fork is lifted, it will cause instability and even rollover.

15. Don't stand under the lifting goods or forks and don't pass under them. Please keep a distance from the roadside or the edge of the platform.

16. When the forklift is loaded and going downhill, drive carefully. Don't drive at an oblique angle, turn or load or unload goods on a slope.

17, it is forbidden to put any part of the body between the gantry mechanism, gantry and forklift. It is forbidden to extend any part of your body out of the console.

18, when loading and unloading goods, should slowly operate the hydraulic control lever. Do not suddenly land or stop during the lifting operation.

19. Never use a damaged tray. Before use, you must confirm whether the tray or buffer platform is firm and reliable.

20. For other operating details, please read the operating instructions. Please read the special operating instructions when transporting oversized and dangerous goods.

Therefore, the obstacles should be:

1. When the forklift fails (such as brake failure, oil leakage, etc.). ), the forklift must stop running and report to the competent department for repair.

2. When there is a fault light or alarm signal on the forklift instrument, the forklift must stop running and report to the competent department for repair.

Daily maintenance and cleaning:

1, before driving, check whether the forklift is normal, whether there is oil leakage or abnormal noise, and pay attention to the cleanliness of the forklift.

2. Battery forklift: Check the battery liquid level of each unit once a week to prevent the battery from being damaged due to low liquid level.

When the battery charge is as low as 20%, the battery must be charged. Keep the battery surface dry and clean.

3. Diesel forklift: check the oil and antifreeze levels once a week, and it is forbidden to open the water tank cover during the use of the forklift.

Wait until the water temperature is completely cooled, and then open the liquid to add.

Consequences of non-severe myopia:

1. Health consequences: collision and disease.

2. Consequences of labor law: administrative sanctions such as warning and dismissal.

Please indicate the source of the article, or you will be investigated for legal responsibility, www.zhaochache.com.