Woodworking team management system?

What is the specific content of the woodworking team management system? Zhong Da Consulting will answer your questions below.

A, woodworking class all personnel must obey the overall management and scheduling of all management personnel of the project department, obey the overall situation. For those who don't obey the arrangement of the foreman and managers. Fine 1000 yuan, at your own risk.

Second, read the drawings carefully and carry out the construction in strict accordance with them. Without the consent of the foreman, the construction drawings shall not be changed at will. Workers who change the construction drawings without the consent of the foreman must be cleared once they are found, and the team will be responsible for all the losses caused, and 200 yuan will be fined. If the team is found to make the same mistake for the second time, the team will be fined 1000 yuan.

Three, carpentry class template installation must be carried out in strict accordance with the current specifications and design drawings. Formwork and its support must have sufficient strength, rigidity and stability, and its supporting part should have sufficient supporting area. If the work can't meet the above requirements, the foreman has the right to call a woodworking class for rectification. In case of non-compliance, the team 500 yuan will be fined, and the rectification is required to be qualified.

Four, template joints should be tight, do not leak slurry, joints should not exceed+/-0.5 mm .. Template flat-fell seam is lax, resulting in concrete honeycomb, carpentry team is responsible for, each fine 200 yuan.

Five, the template installation must be firm, the axis elevation position is accurate, such as the template reinforcement is not firm and blasting, concrete section deformation, depending on the seriousness, each fine of 200~500 yuan. The team is responsible for the losses caused.

Six, before pouring concrete, the debris in the template should be cleaned up, and the unused materials should be neatly stacked and placed where they do not matter. If there is any violation, the foreman refuses to listen to the right to ask other teams to clean up, and the expenses incurred shall be borne by the woodworking team, and 500 yuan shall be fined.

Seven, when the template is removed, the concrete strength when the side form is removed should be able to ensure that its surface and edges and corners are not damaged. Whoever intentionally damages the concrete surface and edges and corners will be fined 50 yuan every time.

Eight, bottom die removal, should be in the case of foreman's consent, can be removed. If the bottom die is dismantled without authorization, resulting in quality and safety accidents, the team will take full responsibility and clean it up.

Nine, template installation in strict accordance with the specifications and design drawings, if any: column, wall, beam axis displacement, elevation, section size, verticality, surface flatness, etc. Do not meet the requirements, the foreman has the right to ask them to rectify. If you don't listen, the team will be responsible for all the consequences and 500 yuan will be fined.

Ten, about material management:

1, dismantled steel pipes, fasteners, tie rods, wood squares and templates shall be neatly stacked in time. If the materials are not piled up or confused, they will be fined 50~ 100 yuan each time. The foreman has the right to ask other teams to clean up and pile up, and the expenses incurred will be borne by the carpentry class.

2. After the formwork of each layer is dismantled and installed, the materials of the next layer should be cleaned up before pouring concrete. If not, each floor will be fined 400 yuan.

3, wood square, blockboard, bamboo veneer blanking, should first calculate the blanking size, combined with drawings, try to avoid waste, long wood square, big template shall not be arbitrarily reduced, found a fine 200 yuan.

4. All materials (such as steel pipes, fasteners, tie rods and wood, etc.). ) other reasons used by the woodworking class (such as loss exceeding normal loss) are not responsible.

1 1. The work arranged by the site foreman must be carefully implemented and completed on time. You can put forward reasonable suggestions to the foreman. For the work that can't be completed during the day, such as the time limit for a project and schedule requirements, on the premise of safety, overtime workers must work overtime, otherwise, 500 yuan will be fined/time.

Twelve, rework caused by the team's own operational mistakes, must deduct its material costs. On the other hand, when rework is caused by design and other reasons, the foreman can calculate the quantities and settle accounts.

Thirteen, the team leader must educate the workers in this team in all aspects. If the team discovers theft, they must be fired and their wages stopped. If the circumstances are serious, it will be handed over to the public security organ for handling.

14. The formwork and supporting frame installed by woodworking class must be accepted by quality supervision, supervision, relevant personnel of Party A and the construction unit at one time. If the acceptance is unqualified, the carpentry class will be responsible for the delay and loss of the construction period, and will be fined 500~ 1000 yuan each time.

15, safety and civilized construction management regulations:

1, the personnel entering the construction site must register carefully, carry out level 3 safety education and safety disclosure, and be fined 100~200 yuan.

2. Admission personnel must obey the accommodation specified by the unified arrangement of the project department, and those who set up work sheds without authorization will be fined 200 yuan, and the demolition and rectification will be completed.

3. It is forbidden to use electric stoves and electric tigers to cook and boil water. 300 yuan will be fined every time he violates the rules, and the equipment will be confiscated.

4. Care for environmental sanitation, do not pour sewage, urine and garbage anywhere, and do not bring children into the construction site. Every violation will be fined 100 yuan.

5, temporary electricity are not allowed to pull disorderly connect, turn off the power before going out, every time illegal fines 200 yuan/times.

6. Don't drink, wear slippers, go to work shirtless or barefoot, and be fined 100 yuan each time.

7. You must wear a safety helmet when entering the construction site, fasten your seat belt when working high above the ground, and deduct 50 yuan/person from the team every time in violation of regulations.

8. Damaging safety protection and warning signs, 50 yuan will be fined every time.

9. Damaged finished products and semi-finished products will be fined 100 yuan/time in addition to compensation according to the price.

10, the materials are not piled up as required, and there is no identification, and the fine is 100 yuan/time.

1 1. Those who leave materials illegally during aerial work and dump garbage and waste residue at high altitude will be fined 100 yuan/time, and the team will be responsible for the consequences.

12, the materials stacked on the unloading platform will be fined to 50 yuan once every time they exceed the load limit.

13, woodworking machinery is unprotected, and 50 yuan is fined for not turning off the power supply after each use.

14, the template removal is not carried out according to the requirements of the scheme, and the steel pipe template is littered and hung, and offenders will be fined 200 yuan every time.

13, construction electricity settings do not meet the requirements, there is no leakage protection, there is no grounding connection, the wire is damaged and aging, and it is not repaired and replaced in time, and 50 yuan is fined every time.

14, 200 yuan was fined for illegal operation in violation of the "Ten No Lifting" regulations.

15, teams should cooperate with each other; Discuss with each other to avoid rework; In case of rework and material loss, the relevant team will compensate the materials. And the relevant teams will be fined 200~500 yuan each.

16, drinking after 22: 00 in the evening, making a loud noise, and the volume of TV and radio is not controlled, which affects others' rest. Fine 100 yuan/time.

17, the canteen should be clean and hygienic, the catering staff should have health certificates, and raw and cooked food should be separated to prevent food poisoning, and 200 yuan should be fined in violation of regulations.

18, fighting is strictly prohibited within the scope of the construction site. If found, each party will be fined1000 ~ 2,000 yuan each time, which will be deducted from the monthly settlement of the team, and the parties concerned will be sent to the public security organ for handling.

19, it is strictly prohibited to violate the law and discipline within the scope of the construction site, and gambling is strictly prohibited.

20. If the "family planning" policy is violated, the project department will be fined by the higher authorities, and the fine will be borne by the team.

I hope that the team will seriously organize learning, convey the above matters, educate workers more, and actively abide by them; In case of violation, the fines imposed by the Project Department shall prevail, and the fines shall be deducted from the progress payment. The fine from the fine will be awarded to the team with excellent construction quality. This system will be implemented as of 201111.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd