What are the skills of sticking car stickers?

< < Sticking method of deep blue company car sticker > >

dry sticking method-car stickers or small stickers apply

dry sticking method steps-tools: clean rag, scraper and credit card

1. Clean the car body and keep it dry.

2. Lift up the transfer film (transparent plastic film pasted on the car body) together with the car sticker; Under normal circumstances, slowly stick, scrape with tools, and uncover the backing paper.

3. If the length and width of the car sticker are less than 1cm, you can also tear off all the transparent transfer film and sticker before pasting. However, care must be taken to avoid accidental adhesion or falling to the ground and sticking up dust.

4. Oblique or scrape the transfer film repeatedly with a clean rag or scraper [such as a telephone card or credit card]; Until there are no bubbles in the sticker, and then tear off the [transparent] transfer film; It is recommended not to expose to the sun or wash the car within 24 hours.

wet sticking method-large car stickers are suitable for [two-person operation is recommended ]

wet sticking method steps-using tools: watering can, clean rag, scraper, art knife and air duct

1. After cleaning the car body, spray water with watering can on the parts of the car body to be stuck-mainly to reduce the viscosity of the sticker and facilitate the position adjustment.

2. after determining the position to be pasted, peel off the transfer film (transparent plastic film pasted on the reflective sticker) and the car sticker from right to left [or from top to bottom] and press it on the car body with a rag, then peel off the backing paper while pasting and flattening it with a rag.

3. When you encounter a door handle or a bumper strip, you should cut the material and pack it in or carry it away according to the situation.

4. After adjusting the general position of the figure in time, scrape off water and bubbles repeatedly with a scraper, and scrape obliquely from right to left when using the scraper; Finally, the transparent transfer film is torn off.

5. When the car door meets the sewing, divide it with a utility knife and wrap it inward.

6. Try to let the moisture in the car sticker dry thoroughly, and if possible, you can use an air duct to heat and dry it moderately. Suggestion: Try not to be exposed to the sun within 24 hours, and it is not advisable to wash the car within 48 hours.

stickers are customized products, and returns are not accepted! Generally, it can be delivered one to two days after payment! Please contact the customer service staff before buying! Small stickers, large stickers and other customized dimensions are customized according to the standard ratio of length or width!

the car is too dazzling, and the car stickers and body advertisements can all be customized in color and style. Only what you think you can't do, nothing we can't do!

optional materials: ordinary, reflective, silver-plated (monochrome), electroplated wire drawing

(monochrome), and other materials. Colors can be matched by yourself

Material: the price is domestic plain paper, the price of imported paper is 26 yuan

The price of imported reflective material is 35 yuan (colors can be customized)

The whole car includes: all large stickers and small stickers on both sides of the car body, and machine cover stickers. (excluding front and rear gears)

Product description:

The reflective stickers and non-reflective stickers sold in our store are carved stickers, not inkjet or printed stickers (advantages of carved stickers: they are not easy to fade in 3-5 years, while digital inkjet and printed stickers will fade after several months of exposure. So at present, most riders choose carving stickers.

Owner's mounting steps:

1. Clean the position on the car body that needs to be mounted and wipe it with a clean towel until it is dry.

Small sticker mounting method:

2. Tear off the backing paper of the sticker directly, stick it on the part to be mounted, and level it with a scraper (or bank card).

3. Finally, carefully remove the transfer film on the top of the sticker.

large-scale sticker mounting method (stickers over 1 cm):

2. Prepare a watering can, and fill it with clean water with detergent (the detergent is used for lubrication, so as to prevent it from moving when it is out of position. ）； A soft and clean towel; A hot air gun (or hair dryer).

3. spray the parts to be pasted with water with detergent evenly again, and keep them moist.

4. Tear off the backing paper on the back of the sticker and stick it on the mounting part. Because it is a large sticker, one side should be fixed first and then the other side.

5. With the center of the sticker as the origin, scrape it evenly in all directions with a plastic scraper, so as to scrape out the water to avoid leaving bubbles; If you find a small amount of sand, you can gently lift the corner of the sticker, take out the sand, and then continue to scrape.

6. After scraping completely, keep it for 15 ~ 2 minutes, and then tear off the transfer film on the surface of the sticker after it is completely dry; If you want the sticker to dry quickly, you can gently blow it with a hot air gun to heat it (pay attention to the distance). After the sticker dries, you can tear off the transfer film.

Note:

1. Care should be taken to avoid sticking the stickers together.

2. please don't wash the car for three days, because the sticker hasn't been completely pasted during this time, and the high-pressure water column of car washing will affect it. It's okay to wash the car after three days.

Required reading for buyers:

1. As some large-sized stickers are rolled up in the process of packaging and delivery, there are some bubbles in the backing paper and transfer film of the stickers, and some backing papers will be wrinkled. Please rest assured that this is a normal phenomenon and will not affect the quality of the stickers and the mounting process. However, please spread the sticker on a flat table and scrape it with a scraper (or bank card) before putting it on.

2. Stickers made of reflective materials will have different reflective effects and colors under different light sources and different illumination angles. The product pictures on Taobao are the reflective effects of reflective stickers under the vertical camera flash, which is equivalent to the effect under the illumination of car lights at night. Please understand and tolerate the color difference between the picture display and the real thing in general!

1. Q: What is a reflective car sticker?

Answer: Reflective sticker is a self-adhesive sticker with motorcycle theme and content, which is made of reflective material with adhesive backing and carved by hand or machine or silk-printed. Car stickers have the same reflective function as traffic signs and license plates, and ordinary stickers can't be compared in terms of characteristics and service life. It is the most personalized functional sticker at present!

2. Is the reflective sticker waterproof?

A: There are many types of materials used in reflective stickers: PET type, acrylic type, etc. In layman's terms, they are plastic, waterproof and not afraid of washing!

3. Q: What is the function of the reflective sticker?

Answer: The main functions of the reflective sticker are: due to the characteristics of reflective materials, it can reflect light in the direction of light source projection, so that drivers who drive around at night can attract attention, strengthen "existence", solve the problems of seeing and being seen, and achieve the purpose of improving the driving safety factor!

4. Q: Is the reflective sticker only white?

Answer: The color of reflective stickers is influenced and limited by reflective materials. At present, there are commonly used colors such as silver gray [white], red, yellow, blue, green and orange to choose from. Red can be processed into reflective stickers with more colors after silk screen printing or ink painting, but its primary colors are inseparable from the above six colors; The most commonly used colors are only red, yellow, blue and white

5. Q: Why are the reflective stickers I bought different from those you posted online?

a: limited by Taobao platform, the product picture display can only show one state of the reflective stickers. Most of the pictures we show are the effect pictures in the reflective state. All the reflective stickers that are "milky white" are the color after reflection, and the "white" reflective stickers are silver-gray in natural light [during the day]! Other colors, such as red, yellow, blue, green and orange, will be much darker or darker when viewed in the daytime than when reflected. These are the characteristics of reflective materials, which cannot be changed by the seller's manpower!

6. Q: Why are reflective stickers so much more expensive than ordinary popular car stickers?

A: As the reflective sticker is made of functional material reflective film, and the raw material of reflective film is very expensive, it is generally made of imported high-grade materials, with high cost. Imported reflective materials range from tens to hundreds of yuan per square. At present, it is not a popular car sticker, but only a few manual workshops design and produce it in limited quantities, so the price will be much more expensive than ordinary popular printed car stickers! In addition, the reflective materials we use are imported from Japan, which are different from the "reflective stickers" sold in other online stores. Please note that if you are responsible for your car, you will find a strong contrast between imported and "domestic" after one year!

7. Q: Why should we use imported materials, but not domestic ones?

a: because the production technology of reflective materials has been made public for a long time, the reflective effect of domestic reflective materials is almost close to that of imported reflective materials, but domestic materials have a fatal weakness: the reflective coating and adhesive are unstable! That is to say, the reflective effect is not lasting and easy to degum, that is, the reflective coating decays quickly, and the back adhesive will fall off in a large area when peeling off. If it is used to make car stickers, the latter is extremely unfavorable for car body treatment, so we use imported special materials to make car stickers.

8. Can car stickers be attached to the window glass?

A: Yes, glass is the most ideal pasting surface, as long as it is not frosted or the glass window that moves up and down can be pasted;

9. My car has been scratched recently. Would you like to put a sticker to cover it?

A: Car stickers should be posted on a smooth and undamaged surface to last longer, so we don't recommend posting car stickers on the damaged surface. In addition, car stickers are made by carving process, most of which are hollow and have no covering function.

1. The scratch is very small. I still want to cover it with a sticker, so I'm too lazy to paint it!

A: First of all, the scratched position is not smooth, there will be a gap after the car sticker is attached, and it will blister after the rain enters, and then it will peel off due to high pressure when being washed by a high-pressure water gun; Secondly, the rubbed part is not an ideal posting position, but it is forced, so it may look more and more unpleasant in the future; Moreover, the original scratch was very small, and it was not obvious from a distance. After it was posted on the car, it became "there is no silver here for 32"; It's better to paint or buy a touch-up pen!