Parameters of concrete sand-gravel separator

The concrete sand-gravel separator is the core equipment of concrete recycling, which can separate and clean the sewage after the tanker and the sand and gravel in the residual concrete, thus reducing the impact on the environment. The concrete sand-gravel separator is simple in operation, labor-saving and intelligent in control, which greatly improves the working efficiency. The following manufacturers of concrete desander introduce the technical parameters of concrete desander.

Technical parameters of concrete sand-gravel separator:

1. Overall dimensions of concrete sand-gravel separator: length 6.5m, width 1.6m and height 2.1m;

2. Concrete entrance height:1.05m;

3. Discharge chute of concrete truck: gradient difference of 30cm；;

4. One-layer separating screen cylinder: length: 1.8m diameter: 0.8m Function: separate stones and sand, then clean the stones and transport them out. Spiral sand washer: length: 6 m, blade diameter: 0.4 m Function: wash mortar with spiral, separate mortar, and convey sand with spiral.

Concrete sand-gravel separator

Product advantages:

1, sand and gravel are separated once;

2, car wash water recycling, sewage to achieve zero emissions;

3. The separation capacity is 0-30 tons/hour;

4. Wear-resistant parts have been strengthened to prolong their service life. Special design can be made according to the terrain of the production site and the number of car washes.