Sample report summary of safety hazard inspection and self-examination work

In a short time, we have completed the work tasks for a period of time, and what follows is a summary of the work. A good summary is conducive to future work. The following is my summary The "Safety Hazard Troubleshooting and Self-examination Work Summary Report Example" has been collected and compiled for your reference. Summary of safety hazard inspection and self-examination work summary report (1)

In order to implement the spirit of the group company’s notice on carrying out the “100-day safety production without accidents” campaign, and consolidate the sustained and stable safety production situation in New Coast , strengthen the safety awareness of all employees, and promote the realization of the goal of safe production. In accordance with the company's requirements, our Ganyu Project Department always adheres to the policy of "safety first, prevention first, comprehensive management", and carries out work based on the actual work of the first phase of the project. A comprehensive special activity to investigate and control potential safety hazards was carried out. The activities carried out are now reported as follows:

1. Organizational leadership

In order to strengthen organizational leadership and implement responsibilities, our project department has established a special leadership group for the management of hidden safety hazards, with xx as the group The leader, xx is the deputy leader, and xx is the team member.

2. Activities carried out

1. On x, x, the team leader xx organized a study on production safety laws, regulations and traffic safety regulations in the project department office. Through this study, we fully realize the importance of safe production and remind us that the alarm bell is ringing. After the meeting, xx once again emphasized the issue of driving safety, requiring inspections to be carried out before each trip, and traffic safety to be paid attention to when driving.

2. Our project department and the supervision department conducted a safety hazard inspection on the construction site and safety management, and found the following problems:

① The company's main project is nearing completion, and the personnel are relatively loose , safety awareness is relatively weak; there is only one safety officer on site; tower crane drivers habitually violate regulations; personnel from outside units do not wear safety helmets when entering the site, and there are management problems; the edge protection parts of stairways and corridors are damaged Destroyed, not restored; fire extinguishers in the cafeteria are about to expire.

②The installed hanging basket has not yet been tested; the worker climbed into the hanging basket from the second floor, and the safety rope placed was not locked with a safety lock.

③The safety officer did not arrive at the scene; many people did not wear safety helmets; the cables were not buried and were piled up in a messy manner.

3. The hidden dangers detected have been issued a safety hazard rectification notice and rectified within a time limit. All units are required to improve the safety production awareness of all employees, strengthen the safety production management level, implement the responsibilities in place, and daily safety inspections must be carried out. twice.

3. Reasons for the existence of many hidden dangers

1. The safety management personnel of the construction unit have low management level, weak sense of responsibility, and some have a fluke mentality.

2. The safety awareness of on-site workers is weak and their quality is uneven. It was once found that 25 workers were either not wearing safety helmets or the safety helmets were not attached.

IV. Suggestions

1. Establish an effective reward and punishment mechanism to effectively motivate and restrict construction units.

2. Let the construction unit provide safety education and training to employees (mainly outside workers) in stages to enhance workers’ safety awareness and the importance of safe production. Summary report on safety hazard inspection and self-inspection work (2)

XX Municipal People’s Government:

Based on the actual situation of production safety in XX City, the Municipal Safety Committee Office will take the lead to organize the Municipal Security The Supervision Bureau, Housing and Urban-Rural Development Bureau, Fire Brigade, XX Town Government and other departments formed a special inspection team to conduct special inspection and rectification of production safety in employee dormitories at construction sites across the city from March 16 to 23, 20xx. The inspection situation is now reported as follows:

1. Work situation

In this special inspection of production safety in employee dormitories at construction sites across the city, we focused on the safety of employee dormitories at construction sites across the city. Special inspections were conducted on fire protection, safe use of electricity, etc. During this investigation and rectification, *** inspected six construction site employee dormitories including the XX project department of the XX city branch of the construction and installation engineering company, and *** issued an inspection opinion 5 servings.

2. Potential safety hazards discovered during the inspection

From the special inspection, it was found that most of the employee dormitories at construction sites in our city have the following problems:

1. Employees' fire safety awareness is weak

Construction units employ temporary migrant workers with high mobility and have not undergone strict management and fire safety knowledge training. They have weak fire safety awareness and do not understand or master basic fire protection knowledge. Fire extinguishers are used to put out initial fires, but they do not call the police or organize personnel evacuation. Especially for migrant workers whose construction time is short and their work is scattered, it is difficult to implement fire safety management.

2. The management does not have adequate fire safety management

The electricity consumption is large, the laying of electrical lines is not standardized, the illegal installation of electrical equipment, and the unauthorized connection of electrical lines are more serious. Some also install power distribution devices directly on combustible components. The construction unit ignores the management of cigarette butt ignition sources, such as migrant workers' dormitories and building material storage yards. There are many combustible and combustible materials, and the temporary migrant workers and outsiders hired smoke randomly. Once cigarette butts are discarded in fire hazard and other places, it will be destroyed over time. long and can easily cause fire.

3. Measures and Suggestions

In response to the safety hazards discovered during the inspection, the inspection team put forward rectification suggestions on the spot and required construction sites with safety hazards to make rectifications immediately. In order to do a good job in safe production at construction sites in our city, the following suggestions are hereby put forward:

1. Strengthen the safety of construction sites, indoor and outdoor decoration project construction sites, workers’ dormitories, warehouses, woodworking processing plants, Fire safety management of key fire prevention areas such as canteens, power distribution rooms and open fire operations. Reasonably configure a sufficient number of fire-fighting equipment to ensure complete and effective fire-fighting facilities, smooth fire evacuation channels, and set up eye-catching fire signs. Establish an inspection and inspection system for enterprise leaders and personnel on duty. Clarify emergency response methods, implement fire safety and security work to specific positions and specific personnel. Personnel on duty will be on duty 24 hours a day, conscientiously carry out inspections and inspections, and be proficient in using fire extinguishing equipment and alarm facilities, so as to prevent disasters before they occur. , to ensure that fire safety work is foolproof.

2. Strengthen the management of electricity consumption at the construction site and employee dormitories. The construction unit shall determine an electrician with a special operation certificate who has been trained in production safety and fire safety to correctly and reasonably install and maintain electrical equipment. Frequently check the operation of electrical lines and electrical equipment, focusing on checking whether the line joints are in good condition and whether there are any Safety device, whether there is short circuit heating, insulation damage, etc.

3. The construction authorities should carry out extensive publicity, education and training on fire protection, production safety laws and regulations, and basic common sense in the construction industry, and publicize laws and regulations on fire protection, production safety and fire protection, The common sense of production safety has further improved the employees' awareness of production safety, fire safety awareness and fire prevention and fire-extinguishing skills, forming a situation of fire protection and production safety with group prevention and group management.

4. The Municipal Housing and Urban-Rural Development Bureau, the Public Security Fire Department and the Municipal Work Safety Bureau should strengthen supervision, inspection and guidance on the safety production and fire safety work of the projects under their supervision according to their respective division of functions. Responsible units that do not conscientiously perform their fire protection and production safety responsibilities and create hidden dangers of major fire safety accidents and major safety production accidents must be seriously investigated and punished. If necessary, measures to suspend production and rectification shall be taken, rectifications shall be made within a time limit, and the hidden dangers shall be completely eliminated. Summary of safety hazard inspection and self-examination work summary report (3)

In order to further strengthen the school’s safety management work, the school always regards safety as a top priority, and always adheres to the school philosophy of safety and no trivial matters. The safety of teachers and students is always top priority. In order to nip various safety accidents in the bud, the school will conduct inspections on potential safety hazards inside and outside the school at the beginning of the semester. The recent inspections are now reported as follows:

1. Strengthen leadership and attach great importance to safety work

The school formulated a work plan for hidden danger investigation and promptly established a school safety inspection leading group. According to the requirements for potential hazard investigation, the work objectives of relevant personnel shall be clarified, the investigation responsibilities shall be implemented, a comprehensive inspection of potential safety hazards on campus and surrounding areas shall be carried out, and inspection records shall be carefully kept.

2. Inspection of various facilities on campus

Through the inspection, there are no safety hazards in the school’s teaching buildings, walls, toilets and other facilities; the school conducts inspections of electrical equipment throughout the school During the inspection, it was discovered that several transmission lines were loose and some plugs were exposed, and they were promptly replaced and repaired. There are no safety hazards in gates, walkways, flagpoles, etc. The school alarm is working fine.

3. Inspection of the surrounding environment outside the school

There are no corporate sites that produce, operate or store toxic, harmful and hazardous chemicals around the school, and there are no large-scale group activities. At the same time, the environment around the school is A comprehensive inspection was conducted on traffic safety, the public safety environment of the school and surrounding areas, and the natural geographical environment where the school is located was also surveyed, and no safety hazards were found.

4. In order to eliminate safety hazards and ensure the safety and stability of the school and surrounding environment

Our school has adopted the following rectification measures in response to the safety hazards discovered above: Intensify safety education for students , use various forms to provide safety education to students, and formulate various management measures. Comprehensive rectification of school circuits and joint logistics of power consumption sites. Each class teacher is required to talk about safety precautions at all times and every day, so that every student must firmly establish safety awareness and strive to reduce the occurrence of safety accidents.

In short, our school actively adopts a series of safety measures, always adheres to the people-oriented attitude, adheres to the attitude of being responsible for students, parents, and the school, and does the work seriously and meticulously. We will always do a good job School safety work prevents problems before they occur and contributes to the safety and stability of the school. Summary report of safety hazard inspection and self-inspection work (4)

In order to further strengthen the safety prevention work in our town’s nursing homes and fully implement the requirements of superiors, combined with the actual situation of our town’s nursing homes, the town’s organizational strength, A comprehensive inspection has been carried out on the safety work of the XX Center Nursing Home and the scattered elderly with five guarantees. The safety inspection work is summarized as follows:

First, strengthen leadership and ensure the implementation of responsibilities

In recent years, our town has always regarded the safety prevention work of nursing homes as an important task, and has conscientiously performed its duties to ensure the safety of life and property of the centralized "Five Guarantees" recipients and the scattered Five Guarantees elderly. In order to carry out this safety inspection, our town established a special inspection leading group with the mayor XX as the team leader, the director of the Social Affairs Office as the deputy team leader, and all the staff of the Social Affairs Office as team members, to implement the regulations of the elderly care institutions at all levels. The safety prevention work responsibility system uses all effective means to ensure that all preventive measures are implemented and resolutely prevent responsible accidents from occurring.

The second is to highlight key points and establish a long-term mechanism.

During the inspection, we focused on supervising and inspecting the implementation of various rules and regulations of the elderly care institution. The overall safety situation of the nursing home in XX Town Center is good, and the implementation of various systems, the clarification of responsibilities, and daily management of food safety have been tightened and detailed. According to the actual situation, we can promptly allocate the management personnel of the nursing home to ensure that the elderly residents are always taken care of, and to eliminate various safety hazards caused by negligence. At the same time, in daily management, we always regard the safety management inspection of nursing homes as a regular task and pay close attention to it. The nursing home holds a regular safety work meeting every month to report on the safety management work and effectively nip safety accidents in the bud.

When inspecting the living environment and surrounding conditions of scattered five-guarantee households, it was found that some elderly people had weak safety awareness and dry firewood was very close to fire sources. Mayor Zhu asked them to pay attention to safety and move dry firewood away from the fire. Source; The summer heavy rain season is coming. Pay attention to the surrounding environment, report dangers to the village in time, notify the government, and do everything possible to ensure the safety of life.

The third is to conduct a comprehensive investigation to ensure that rectifications are in place

During this inspection, we adhered to the principle of “prevention first, combined with prevention and fire prevention” and carried out inspections on the fire protection facilities and fire protection facilities of nursing homes. The quality of personnel has been comprehensively examined and understood.

Inspection and rectification results: For some elderly people who use electric rice cookers to cook medicine indoors, we patiently educate and require them to go to a special cooking platform to cook medicine to eliminate fire hazards in a timely manner; mark fire escapes in eye-catching locations and place them at reasonable locations Arrange fire-fighting equipment, actively simulate and guide evacuation, and fundamentally eliminate the risk of fire safety accidents; when going out for a walk in the nursing home, three or five people should go together, and walking by the river is strictly prohibited, so pay attention to personal safety; natural gas cannot be moved without permission to prevent poisoning, burns, and explosions Wait for a safety incident to occur.

The fourth is to strengthen publicity to ensure stability and order.

During the inspection, we also urged all staff and the elderly to increase their awareness of fire safety and enhance their self-prevention, self-examination and self-rescue capabilities. At the same time, they have been intensively publicized on anti-theft, food hygiene and other knowledge to enhance their awareness of safety and hygiene. In addition to strengthening the care of the "Five Guarantees" recipients, nursing homes have also done a lot of work in paying attention to their ideological status. They can provide targeted ideological education and psychological counseling to emotionally unstable people to relieve their mental knots and ensure that Improve their emotional stability and mental health. Summary report on safety hazard inspection and self-examination work (5)

In order to effectively carry out safety production work, our hospital has firmly established the "safety management system" in accordance with the requirements of "going to the sides horizontally, vertically to the bottom, and leaving no dead ends". First" thinking, further increase the intensity of safety work. Adhere to the safety production policy of "safety first, prevention first", starting from raising awareness, strengthening leadership, improving systems, strengthening management, conducting in-depth safety inspections, and actively eliminating potential accident risks. Through the joint efforts of all employees of the hospital, the safety responsibility goals have been achieved better; there have been no poisoning accidents and major medical safety accidents. The specific practices of our hospital in safety work are:

1. Conscientiously implement the guidelines, policies, laws and regulations on production safety

Taking "safety first, comprehensive management" as the principle, Adhere to the principle of highlighting key points, supervising symptoms and root causes, and focusing on root causes. From the perspective of politics and the overall situation, we should unify our thoughts to the requirements and arrangements of the party, the State Council, the provincial party committee, and the provincial government, and pay close attention to the main responsibilities of the safety production system supervision and the implementation of the main responsibilities of the unit, and ensure that the ideological and understanding alarm bells are always ringing, the system guarantees are strict and effective, the technical support is strong and powerful, the supervision and inspection are strict and meticulous, the accountability is serious and conscientious, and all forces are mobilized and mobilized to maximize prevention and control at all costs. Safety accidents and fire capabilities, eliminate safety hazards and fire hazards and hazards to the greatest extent, ensure the stability of the safe production situation of our hospital, ensure that no large, major, particularly major and fire accidents occur, and strive to achieve the goal of "no big things will happen, and no small things will happen." out".

2. Establish and implement a production safety responsibility system, improve production safety management

and supervision systems and mechanisms, formulate safety production plans, and strengthen the construction of our hospital's emergency rescue system.

3. Our hospital carries out comprehensive self-examination work

Especially the inspection of key parts. If the existing safety and fire hazards can be rectified immediately, they must be rectified immediately. If rectification is made, the person responsible for rectification, the time limit for rectification, and the rectification measures must be implemented.

4. Fire-fighting equipment should be installed in key areas such as outpatient clinics and wards, safety passages should be clearly marked, and emergency evacuation passages should be clear.

Pressure vessels, pressure pipelines, water, electricity, gas and other facilities are safe and available. Narcotics and narcotics are managed by dedicated counters.

In short, safety production is a long-term and arduous task, and we must always do so. Everyone must be vigilant, sound the alarm, and raise safety awareness to create a good atmosphere for our hospital.

Summary of safety hazard inspection and self-inspection work summary report (6)

According to the spirit of Sichuan Jiaohan (20xx) No. 792 document, in order to strengthen the safety production work of the project and prevent accidents, our project department The construction safety hazard investigation and management work has been carefully carried out as required. The progress of the hidden danger investigation and management work is summarized as follows:

1. Overall situation

(1) The project department received the Sichuan report After handing over the notice of Document No. (20xx) 792, a special seminar was immediately organized, project managers were organized to conscientiously publicize and study the spirit of the document, and special arrangements and deployments were made for the subsequent investigation and management of hidden dangers.

(2) In the process of identifying and managing hidden dangers, the project department carefully organized various departments to study laws and regulations such as the Regulations on Production Safety and the Regulations on the Management of Safety Production in Construction Projects. In order to do a good job in the investigation and management of hidden dangers, various departments of the project department carried out publicity on the investigation and management of hidden dangers in the form of briefings, columns, slogans, banners, wall charts, etc. In order to effectively carry out this work carefully, practically and well. Various departments of the project department mobilized employees extensively to carry out serious safety hazard inspection activities on the project, teams, and positions. Targeted measures were taken to effectively eliminate various hidden dangers and strengthen supervision of the identified safety hazards. , Supervise and urge the completion of rectifications within a time limit to ensure safe production.

(3) In accordance with the spirit of the document and the "Implementation Plan for Safety Hazard Investigation and Management" formulated by the project department, the safety hazards existing in the construction process of the roadbed projects and bridge projects under construction by our department will be investigated one by one. Each construction team is also required to inspect the team's construction procedures and work sites. By December 1, 20xx, the project department organized 7 major safety inspections during the investigation and management of hidden dangers. In this quarter's construction safety hazard investigation and management work, we inspected and rectified 50 hidden hazard projects in the contract section, including 48 general hazards, 48 ??of which have been rectified so far, with a rectification completion rate of 100%; 2 major hazards were rectified, 2 items have been rectified, with a rectification rate of 100. Judging from the inspection, each construction team can basically abide by the laws, regulations and standards related to production safety work of the project headquarters, supervision department and project department. The large-scale safety hazard inspection activity has achieved considerable results in stages.

2. Main features

The project department’s special activities for hidden danger investigation and management mainly have the following features:

(1) Actively organize and carry out “look back” inspections and supervision Work. We carefully organized and carried out inspections and supervision, and strengthened the inspection and guidance of "looking back" work.

(2) Increased efforts to rectify major hidden dangers. Keep an eye on the major hidden dangers identified and follow up for rectification.

(3) Promote special rectification of production safety in key construction sections through the investigation and management of hidden dangers.

(4) Sum up experience and build a long-term mechanism for hidden danger investigation and management. Carefully sort out and summarize the effective practices and experiences since the special action, and establish and improve a long-term mechanism for hidden danger investigation and management.

3. Existing problems

During the activity, each construction team in our contract section invested in safety facilities and formulated corresponding safety measures. The level of safe and civilized construction was higher than in the past. There has been some improvement, but there are still some problems. Main problems: First, the safety awareness of front-line workers is still not enough, and safety education must be further strengthened; second, during the implementation of the special safety plan, publicity and learning must be strengthened to implement it for everyone, which is too one-sided; third, temporary use of electricity, There is still a certain gap between special equipment and other operations and standard requirements; fourth, some construction operators are still unable to fully operate in accordance with safety technical briefings and operating procedures.

IV. Rectification measures

(1) Earnestly do a good job in rectifying safety hazards and strengthen supervision and management.

In the implementation of the special inspection and management plan, safety inspections will be intensified. Safety inspections will be based on regular inspections, supplemented by special inspections (regular inspections on 5, 15, and 25 of each month). Any problems or hidden dangers found can be rectified immediately. If it cannot be rectified immediately, a rectification notice will be issued, and people will be appointed at regular intervals to rectify and eliminate it. If it cannot be eliminated, hidden dangers will be minimized and financial penalties will be imposed. Special operations personnel will be given monthly training and experience exchanges between operators will be promoted. , complement each other, improve the technical level of operators and reduce safety risks. For the outstanding problems and hidden dangers discovered during the "look back" inspection, we must implement responsibilities, implement measures, conscientiously rectify and provide timely feedback on the rectification situation as required.

(2) Implement and do a good job in preventing accidents and disasters caused by natural disasters. It is necessary to deeply learn the lessons of accidents and disasters caused by natural disasters, prepare in advance, and conscientiously implement various measures to prevent accidents and disasters caused by natural disasters. Establish a forecast and early warning system to form a collaborative working mechanism to respond to natural disasters and prevent accidents and disasters. It is necessary to carefully organize and carry out the investigation and management of hidden danger points of natural disasters that may cause accidents and disasters.

(3) Further establish and improve the long-term mechanism for hidden danger investigation and management, and deepen the work of hidden danger investigation and management. It is necessary to carefully summarize the successful experience of special actions to identify and control hidden dangers, further standardize the work of identifying and controlling hidden dangers, establish and improve two long-term mechanisms for hierarchical management of hidden danger inspections and hierarchical monitoring of major hazard sources, and strive to standardize the work of identifying and controlling hidden hazards and monitoring major hazard sources. , institutionalized and regularized. It is necessary to continue to deepen the investigation and management of hidden dangers, grasp the key points, and conscientiously "make up lessons" without leaving any dead ends.

V. Summary of hidden danger investigation and management work and next work plan

Through the unremitting efforts of all the staff of the project department, the hidden dangers that seriously endanger the safety of the construction site have been effectively eliminated. Our project will continue Deeply promote the investigation of potential safety hazards throughout the entire period, further strengthen publicity and education, comprehensively raise awareness of the importance of the investigation of potential safety hazards, and enhance the sense of urgency and responsibility; further systematically summarize the work in the previous stage, and target existing problems and weak links, Actively take measures to continue to deepen the investigation and management of hidden dangers, consolidate the effects of rectification, comprehensively improve the work ideas for preventing safety hazards, and strive to achieve the goal of reducing general safety accidents and effectively curbing major safety accidents and safety accidents involving mass deaths and injuries. Summary of safety hazard inspection and self-examination work summary report (7)

Our school is located in No. 3, and the service scope is the 3, 6, and 7 groups of the xx factory living area, xx village, xx village, and xx village. , the total population within the service scope is about 8,000. Our school currently has three campuses: xx Primary School, Lianhe Primary School, and xx Primary School, and two teaching areas: xx Primary School and Lianhe Primary School Teaching Point. There are 484 students in the school and 37 faculty members. The main campus is in xx Primary School. Our school is a remote rural school. The school is old and the school facilities are aging. The school is located on the Central South Road traffic artery, so there are certain safety hazards. The school has always attached great importance to its own safety work. Since December XX, our school has received Since the District Education Bureau announced the launch of campus safety hazard inspection and special rectification, the school has attached great importance to this work. The school logistics has conducted multiple network inspections of the campus and surrounding environment, and has made some safety measures within the scope of the school's capabilities. The rectification has achieved certain results. Now we will give a summary report on the work done by the school in the past two months.

1. Investigation of potential safety hazards

During the investigation of school buildings, equipment and facilities, we found that there are some safety hazards in the school

Hidden hazards in school buildings

1. The main hidden danger is the men’s toilet and surrounding walls, which have many cracks and are in danger of collapsing at any time.

2. There are cracks on the sidewalk outside the teaching building and there are signs of foundation subsidence.

3. The roof insulation layer above the computer room on the third floor and the multifunctional hall on the fourth floor showed signs of leakage.

4. The height of the guardrail is low and does not meet safety standards.

5. Doors and windows are aging, cannot be closed, and are decayed. The white ash on the ceiling of each floor is peeling off, and there is a danger of falling at any time.

Hidden dangers in equipment and facilities

1. Some wires are aging, causing classroom fluorescent lights to often go out

2. Some drains have no covers

Fire hazards

1. The school gate is not high enough and fire trucks cannot enter the campus

2. There is no fire hydrant in the school.

2. There are many vehicles parked and parked randomly at road intersections, and there is a phenomenon of occupying the road for business operations.

Hidden dangers in recess and after-school management

1. The ramps in the school are long, steep and slippery. If a motor vehicle loses control of its brakes, it is easy to cause traffic accidents in the school.

2. There is no open space for vehicles to turn around in front of the school gate. It faces Zhongnan 1st Road. The road is narrow and there are many people and cars, which is a great hidden danger. There are no obvious safety signs on the roadside.

3. When school is over in the afternoon, some Changan vehicles operate over the line to pick up students outside the school, and are overloaded; there are also many motorcycles that go outside the school to pick up students, and are overloaded.

Hidden dangers in the organization and management of physical exercise: mainly for the safety of students in physical education classes

2. Strengthen rectification and organization and implementation

In view of the above related situations, except for some hardware facilities We have done a lot of work in addition to renovating schools that are unable to make rectifications or postpone renovations according to prescribed procedures.

1. Strengthen safety work leadership and management.

In order to further strengthen the daily safety management of the school, firmly establish the idea of ????"safety first", and effectively implement the safety work responsibility system, the school first further strengthens duty weeks, concierge management, student supervision posts, department management, etc. Safety management responsibilities and responsibilities, strengthened the management of safety ledgers, further improved the relevant safety management systems, sorted out, supplemented, improved, and determined some safety management systems, especially for narrow school passages, chaotic school gates, and broken walls of the men's toilets. In such situations, the school has formulated relevant safety work measures and corresponding emergency plans, and carefully organized the entire school staff to study.

2. Strictly implement the first question system for safety responsibility.

The school has established a leadership safety inspection system and a holiday duty system. Weekly leaders lead teachers on duty to inspect the campus every day. All teachers who find problems should deal with and report them as soon as possible, and strictly implement safety responsibilities Based on the first inquiry system, the school will report to the superior department and the district education bureau as soon as possible. And the assessment of safety accidents will be strictly implemented into the performance salary plan for school teachers.

3. Further strengthen safety education and management for faculty, staff and students.

Let teachers understand safety hazards and enhance teachers’ safety awareness. Based on the various safety hazards detected, the safety awareness of all teachers will be further improved. The school has repeatedly organized all teachers to carefully study the relevant safety education documents from their superiors, and then communicate the safety hazards existing in the school to all staff one by one, requiring teachers to be well aware of the school's safety hazards, and further strengthen their responsibilities for escorting after school, and more importantly, to Strengthen education for students to make them aware of the situation. This move has further improved the safety awareness of all employees, and teachers attach great importance to safety work.