Joke Collection Website - Bulletin headlines - Where does Xiamen have a professional manufacturer of desiccant?

Where does Xiamen have a professional manufacturer of desiccant?

Xiamen specializes in producing desiccant: Xiamen Xuanyi desiccant Co., Ltd.

Company address: 4th floor, No.73 Naizai Dingli, Hu 'an Village, Xinmin Town, Tongan District, Xiamen, Fujian, China.

Xiamen Xuanyi Desiccant Co., Ltd., located in Ludao, is a processing enterprise specializing in producing desiccants, activated carbon, deoxidation and anticorrosion products. The company has a complete and scientific quality management system.

The company mainly produces silica gel desiccant, calcium chloride desiccant, active mineral desiccant, activated carbon deodorant, container desiccant, food deoxidation preservative and other environmental protection products.

Selection method of desiccant:

1, appearance:

Excellent bagged desiccant has neat appearance, clear printing, moderate sealing width, no material inclusion in the sealing, and moderate fullness of raw materials, while inferior desiccant is often rough and skewed, with different sealing widths and fuzzy printing, which is particularly bloated because the bag is too small.

2, packaging materials:

Good packaging materials have uniform thickness, no spots, smooth surface and high strength, while inferior packaging materials have uneven thickness. Even in some places, raw materials can be clearly seen, and the surface is rough and stained. When rubbed by hand, the fiber will fall off and fade seriously, and when squeezed by hand, it will crack from the seal and tear easily.

3. Raw materials:

Excellent desiccant raw materials have uniform particles and obvious heat when touched by hands, while inferior desiccant raw materials have uneven particles, more crushing and less obvious heat, and impurities can be clearly seen.

4. Weighing:

Weigh and record the original weight of the desiccant, and put it in a humid environment for 48 hours before weighing. Compared with the original weight, see if the weight increase is obvious, then dry at 105 for 3 hours, and then weigh. If it is lower than the original weight, it proves that the desiccant does not meet the nominal weight.

Xiamen xuanyi desiccant co., ltd.