What are the five prohibitions of forklift operation?

Don't lift the fork too high when driving. Pay attention to whether there are obstacles in the air when entering or leaving the job site or on the way. When carrying goods, the fork is not allowed to rise too high, which will affect the stability of the forklift. When turning, if there are pedestrians or vehicles nearby, you should first send out the driving signal. It is forbidden to turn sharply at high speed, which will lead to the loss of lateral stability of the vehicle. Therefore, it is forbidden to turn off the engine and slide when the forklift is going up and down, and it is forbidden to brake suddenly when carrying goods, except in special circumstances. Forklift trucks must abide by the traffic rules in the factory and keep a safe distance from the vehicles in front. ? When the forklift is running, the load must be at the lowest position that does not hinder the running, and the gantry should be tilted back appropriately. The load shall not be increased except when stacking or loading. The load height shall not block the driver's sight. When special circumstances affect the front line of sight, you should drive at a low speed when reversing and report the problem in time. Do not work with illness or hide it. It is forbidden to turn on the ramp or drive across the ramp. When the forklift is lifting or driving, it is forbidden to stand on the fork to take items and play a balancing role. Never work with a fork or lift or pull things with a fork. Under special circumstances, safety warning signs must be set to remind pedestrians around. Fork goods at high speed and hit hard objects with fork heads are prohibited. ? Forklift fork operation, it is forbidden to stand around the fork, so as to avoid the collapse of goods and personal injury. ? It is forbidden to overload and lift personnel with forks to engage in aerial work, so as to avoid falling accidents. ? It is not allowed to slide, place, rotate or roll easily by using braking inertia. ? Forks are not allowed to pick, rotate and unload trays. It is forbidden to leave the forklift when the goods on the fork are suspended. Before leaving the forklift, you must unload the goods or lower the fork carriage.