How to install an electric car shed

The installation method of the electric car shed is very simple. First prepare the wrench, then use the wrench to unscrew the rearview mirror, and finally install the electric car awning, and then install the rearview mirror. Other things to note It is necessary to reserve expansion space when installing an electric vehicle carport.

How to install electric vehicle awning?

1. Prepare a wrench in advance to confirm that the electric vehicle awning is intact and that all accessories are missing.

2. Use a wrench to unscrew the hexagonal screws of the rearview mirror, remove the two rearview mirrors, place the connecting rod of the sunshade between the rearview mirror and the electric vehicle body, and screw on the rearview mirror. sight glass.

3. Insert the two sleeves on the front part of the awning into the connecting rod. Be sure to insert them all the way so that they are very tight.

4. Pull the back of the awning to the trunk of the electric vehicle, and tie it to the body of the electric vehicle with ropes on both sides. If you want the awning to be larger, you can also tie it to the trunk. later.

5. The remaining accessories at this time are four elastic rods. Two of the thicker and harder rods are used to reinforce the roof and are connected separately.

6. The other two longer and softer elastic rods support the side edges of the awning. They can be connected separately to complete the installation.