Can the weighbridge be combined with the car wash platform?

of course, the weighbridge can meet the factory washing and management requirements of the two-in-one mixer truck with car washing platform. The mixing station needs to build car washing equipment and weighbridge, plus the road gate. If several sets of equipment are placed at the gate at the same time, it puts forward higher requirements for the site. For the site where these sets of equipment cannot be placed at the same time, the integrated placement method of Zhiheng is a good solution.

Chengdu Zhida is an old commercial mixed company, with four production lines and nearly 1 mixing trucks. The monthly output of concrete exceeds 1, cubic meters, and the traffic volume is huge. The development zone where it is located has high requirements for environmental protection. The station was built in 27, when it was a large mixing station in China. The above picture shows that before the transformation of the car washing machine, the weighbridge and the car washing machine should be placed in front of each other as usual, but there is no extra space between the mixing building and the gate.

Zhiheng put the car washing machine on the weighbridge, and effectively used the space.

Whether the mud and sand generated by car washing can be discharged is the key to success or failure. Zhiheng designed a sand discharge system at the lower part of the weighbridge, which was effectively connected with the water circulation system, and realized three functions of car washing, weighing (including the gate opening after passing the weight) and cleaning and recycling of car washing water in a small site.