Stunning Design+Best Lens Huawei P8 High Edition Evaluation

What is IT 168' s evaluation of mobile phones? Different manufacturers have different understandings. Some manufacturers believe that smart phones are the most important Internet portal at present. In the process of seizing the Internet portal, more attention is paid to minimally invasive innovation and cost performance, which is obviously a simple and quick way to increase shipments. However, some manufacturers believe that what the development of mobile phones can't change so far is the attributes of their communication interfaces, but what has changed is that mobile phones are closely related to our lives, just like clothing, food, housing and transportation, which can show the personality of users. In fact, there are * * * in these two seemingly different roads, and that is the definition of a good product. The definition of good product = good hardware+good software+good design+good service is eternal. Today, we will use the definition of good products to restore Huawei's annual flagship product-Huawei P8.

Starting from Huawei P6, Huawei gradually began to streamline its product line in the domestic market. The product lines in the past two years are mainly divided into P, Mate, G, Maimang and so on. Among them, the main P series is the series that best reflects Huawei's hardware, software and design technical strength. From the sales of 4 million units in P6 to 5 million units in P7, it also proves that Huawei is a correct choice to take the boutique route. But in the mobile phone circle, we have seen too many cases of "classic dramas, sequels will be bad". On P8, whether Huawei can surpass itself again depends on our evaluation.

The hardware is still Chinese core.

In terms of hardware, Huawei's development speed in the past two years is remarkable. After replacing K3V2 series chips with Kirin series chips, it is obvious that Huawei's pace on SOC has accelerated a lot. CAT6, 64-bit, coprocessor, etc., words that used to only appear on Qualcomm and Apple chips, seemed to be taken into Huawei's pocket overnight. At the beginning of the evaluation article, as usual, we brought the hardware parameter table of Huawei P8 for everyone to have a preliminary quantification of this product.

Hardware Parameters of Huawei P8 Carbon Black High Edition

operating system

EMUI 3. 1 (deep customization based on Android 5.0)

Network standard

Mobile Unicom all 4G/3G/2G networks

Fuselage size

144.9x72.1x6.4mm.

weight

144g

screen

5.2 inch 1920* 1080 resolution in-cell screen.

camera

13 megapixel Sony IMX278 stacked camera front 8 megapixel.

processor

Huawei Kirin 935 eight nuclear 2.2GHz 64-bit

Body memory

RAM:3GB？ ROM:64GB (support for expansion)

eigenfunction

Streamer shutter intelligent screen capture voice wake-up

battery

2600mAh built-in lithium-ion polymer battery

Fuselage color

Black/gold

listed price

The domestic price has not been announced.

Through the comparison table of hardware parameters, we can see that Huawei P8 has obviously improved in many key hardware aspects compared with the previous generation of Huawei P7. The processor is replaced by Kirin 935 (standard version is Kirin 930), which is Huawei's latest 64-bit 8-core A53 architecture processor based on 28nm technology. In order to solve the problem that A53 architecture doesn't work well at high frequency, Huawei also customized A53X architecture on the basis of ARM public edition. As for the camera, Huawei P8 also adopted the latest Sony IMX278 module, and replaced the RGBW photosensitive element, which increased the brightness of the picture. However, the screen still continues the previous resolution screen of 1920* 1080. Unfortunately, the size has increased to 5.2 inches. Are you satisfied with the hardware of Huawei P8? You are also welcome to leave a message for discussion.

Opening a box can be called a ceremony.

In fact, I don't usually draw a conclusion about a certain part of the product at the beginning of the test, but for Huawei P8, I really want to say that it is a pleasure to unpack Huawei P8. In fact, many mobile phone packages have left a deep impression on the author, including HTC's "lunch box design", including the unpacking shock absorption of iPhone. But to be honest, I have seen the world, and the packaging design of Huawei P8 is amazing.

The first impression of packaging to the author is actually that there is not much feeling. Neat and calm at best. The popular point is the square design with black main view adopted by most manufacturers. However, it is worth mentioning that in addition to Huawei's chrysanthemum LOGO, there are many unusual certification logos on the packaging of Huawei P8. Including environmental protection representation, environmental protection printing ink representation (SOYINK), UL platinum environmental protection certification mark and environmental protection mixed packaging certification issued by FSC forest certification. It can be said that it is armed with environmental protection.

When the paper protective cover is pulled open, the words Huawei design on the main body of polycarbonate packaging box instantly remind the author of Porsche design, and the font is really similar. Huawei said that the packaging was inspired by bookcases. But if the polycarbonate box is laid flat, it feels more like Braun's radio or audio equipment.

The gold LOGO of Huawei P8 is printed on the top cover of the brown package. Open the top cover, and you will understand why the official said that Huawei P8 adopted bookcase design.

Take out your mobile phone and call the polycarbonate car decorated with piano paint. Inside, instructions and a series of accessories are packed, and the box also adopts the main vision of gold matte.

Huawei P8 accessories mainly include headphones, card pins, data cables and chargers. If there is a VIP card with hidden gold when unpacking, it seems more harmonious. Just kidding. However, since Huawei Glory X2, all new machines in Huawei's high-end product line have built-in VIP services in software, supporting services such as 1 hour response and quick maintenance.

This time, Huawei P8 adopted the standard 5V/ 1A charger and white polycarbonate design.

In terms of headphones, this time Huawei P8 finally used the newly designed headphones. Although it is not as good as the passive noise-reducing headphones launched by Huawei MATE7, the shape similar to Earpod has also won. Huawei continued to use many generations of white headphones before. I have no say in the sound quality, but it is quite comfortable to wear.

So much for packaging design. Although Huawei P8 has a few packaging boxes in recent years, the author can experience the thrill of unpacking, but for most people, the life of packaging boxes is short, and putting them on hold after unpacking is their best destination, and some even throw them away directly. Compared with packaging design, the industrial design of products is much more important. In the next stage of the article, we will analyze the industrial design of Huawei P8.

Disassembling the atlas is more like appreciating Huawei P8 carbon black map.

Integrated metal body+ingenious antenna design

In recent years, major manufacturers have begun to pay attention to the industrial design of their products. It is true that it is an era of "looking at the face", but the low degree of differentiation between software and hardware is also an important reason why smartphones pay attention to industrial design again. We also introduced the hardware parameters of Huawei P8 before. At this stage, let's take a look at the industrial design of Huawei P8. Can you surpass the previous work?

First of all, on the front, Huawei P8 is equipped with a 5.2-inch 1080P screen. Because of the use of screen virtual buttons, the screen ratio is high. The border is equipped with a narrow border design, and the charcoal black built-in wallpaper in the hand is also dark, so the existence of the border will not be felt visually.

On the top of the fuselage, it is equipped with a receiving speaker, an 8-megapixel front camera and a light distance sensor, and a breathing light is hidden on the right side of the top. It is worth mentioning that all the components are symmetrically designed, which is in line with aesthetics.

At the bottom of the fuselage, there is no decoration. Huawei's LOGO, which was previously equipped at the bottom of the fuselage by Huawei P7, was also cancelled on Huawei P8, so that the front of the fuselage was very clean in the black screen state. As for the frame, we can see that between the screen and the metal frame, Huawei P8 has also arranged a circle of polycarbonate isolation belt, which has two functions: 1. Reinforce the screen and reduce the risk of broken screen. 2. By injection molding the antenna, the antenna gain can increase the signal, which is an ingenious design.

On the back of the fuselage, we can see that Huawei P8 adopts an all-metal integrated fuselage, and adopts a whole piece of metal for CNC cutting and hollowing out as the backboard. This process is more complicated than the split metal design of the back and frame of P6. It takes about 50 minutes from CNC cutting to anodizing, to sandblasting and coloring, and then to NMT nano-injection.

At the top of the front of the fuselage, a glass decorative strip is used. In fact, the top is also an important antenna signal overflow port, so the existence of glass decorative strips can not only increase the agility of aviation aluminum on the back, but also increase the signal strength. The uniqueness of Huawei P8 in antenna signal performance is explained in detail in the performance evaluation part of the article. As for the camera, Huawei P8 adopts IMX278 module,13 megapixel camera, which is flat and unobtrusive. The camera is equipped with a Shuang Yuan flash.

The bottom of the fuselage is mainly equipped with NMT nano-injection antenna overflow strips, and the process is obviously improved compared with the direct injection molding of the previous two generations (Huawei P6/P7). Although nano-injection molding was first applied to Huawei's P series products, with the accumulated experience in Huawei's G7 and other products, Huawei's nano-injection molding can be achieved without any protruding feeling. The workmanship is still good.

The fuselage and bottom are equipped with 3.5mm headphone jack, noise-reducing microphone and microUSB charging and data interface respectively. It is worth mentioning that in order to ensure the beauty, the insulating ring of Huawei P8 interface is not directly on the surface, but embedded in metal.

The side of the fuselage is mainly a power button and an integrated volume button, both of which are metal pieces. And in the design of power key, it still continues the crown design of the previous generation P7. Draw concentric circles on the surface to increase the feel, and choose elastic sheets with moderate pressure, and the buttons feel good.

In terms of slot, the slot gap of this engineering machine version in the author's hand is also quite in place, and there will be no depressions and protrusions. This time, Huawei P8 adopted a dual card slot design, and the first card slot supported microSD card expansion. This time, Huawei P8 still supports dual card slot and dual 4G mixed plug-in function, and users can switch which card to use to surf the Internet in the system.

In terms of overall appearance, the author thinks that the integrated metal body adopted by Huawei P8 is good in workmanship and the antenna design is very clever, which not only ensures the stability of the front screen and the agility of the back design, but also ensures the good overflow of antenna signals. If there is any regret in the design, the biggest regret is that the carbon black version in the author's hand is not as good as the gold version in fingerprint and oil pollution prevention. Concerned users can choose the gold version. It can be said that Huawei P8 is one of the most design-conscious products in domestic mobile phones. As for whether it looks good or not, or whether the design of P8 looks like XX mobile phone, please leave a message for discussion.

130000 pixel RGBW photosensitive camera, what's the effect?

Before the release of Huawei P8, Huawei launched a series of posters with light painting as the element, and also launched a promotional film with the theme of light. In fact, these elements are reflected in Huawei P8. Reflected in the improvement of camera hardware and function. In terms of function, Huawei P8 supports new streamer shutter and time-lapse photography, and its hardware is equipped with the latest Sony IMX278 stacked photosensitive element. At this stage of the article, I will explain to you what is the most important camera function of Huawei P8.

First of all, the Sony IMX278 Sony stacked photosensitive element is quite different from the flagship photosensitive element such as Sony IMX2 14 which we are familiar with before, because its photosensitive element adopts RGBW photosensitive strategy. As we all know, the visible light of human eyes can be combined by different arrangements of RGB (red, green and blue). RGBW, on the other hand, adds a white sub-pixel to each photosensitive pixel on the basis of the three primary colors of red, green and blue. This technology is widely used in high-end LCD TV. Imagine that IMX278 with13 million pixels has13 million white sub-pixels on hardware, and the most direct feeling for human eyes is the improvement of picture brightness. Moreover, this time Huawei P8 is also equipped with F/2.0 super aperture and OIS optical anti-shake design, so the night scene will be a big advantage of Huawei.

▲ Click on the picture to view the original picture. Before analyzing the proofs, let's take a look at the author's favorite streamer shutter function. By fixing the tripod, Huawei P8 can easily capture the effect of car trajectory and display the picture in real time during shooting. This is due to Huawei's software optimization under the long exposure of the camera, and also to the hardware upgrade made by Huawei P8 in night scene shooting. Huawei P8 can also take photos that need to be slowly debugged by professional equipment such as SLR cameras. This is also a favorite function of Huawei P8.

Other functions, such as time-lapse photography, filter real-time display shooting, HDR function and camera post-processing function, are covered by Huawei P8, and the functions are not much different from other flagship phones, so I won't go into details here. Let's have a look at the proofs.

In the aspect of night scene, we can see that Huawei P8 can take a picture with purer, stronger resolution and higher brightness than Huawei P7 with shorter exposure time and lower ISO, which is the advantage of RGBW sensor compared with ordinary RGB sensor.

▲ Click on the picture to view the original picture. Through the display of several proofs, we can see that Huawei P8 camera uses more powerful hardware, so the details, colors and purity of the pictures taken during the day have been greatly improved compared with the previous ones. Due to the pursuit of biplane design, the volume of the focusing cavity motor will be compressed. However, it is undeniable that Huawei P8 chose IMX278 as a very successful choice, and the software algorithm is also very interesting, easy to use and intuitive. Huawei regards taking photos as one of the biggest selling points of this P8, and the result of taking photos is worthy of the name.

Upgrade the EMUI3.0 experience again.

How important is the current smart phone customization system? Look at the understanding of various mobile phone manufacturers on their own customized UI. Xiaomi: Xiaomi mobile phone x2=8 16798, MIUIx4=8 16798. MIUI= 1/2 Xiaomi mobile phone is available. One plus mobile phone: the cool experience of hydrogen+oxygen system. Hammer mobile phone: Smartisan os has the most humanistic feelings. Examples and so on tell us that the customized UI can play a decisive role in the quality of a smart phone. Speaking of Huawei, we can think of Huawei's customized UI——EMUI. In fact, EMUI is one of the founders of customized UI in China. It has been more than two years since it was born. Experienced EMUI1.01.51.6/2.0/2.3/3.0 and so on. Recently, Huawei P8 officially released EMUI 3. 1. What is the charm of EMUI 3. 1? Today, we will bring you a brand-new EMI3.1experience through Huawei P8.

In fact, there are many preconditions for the quality of a customized UI, such as whether it is smooth enough. Experience EMUI 3. 1 with Huawei P8 this time. As Huawei's strongest mobile phone at present, running EMUI 3. 1 has no problem in fluency. And the memory occupied by the system is basically the same as that of the previous EMUI 3.0 (about 2. 1G memory can be used when booting). The word Caton is no longer relevant in EMUI 3.0, but it is more fluent in EMI3.1. In addition to fluency, the unity of system style has also become an important factor in whether a system is excellent or not. Let's talk about the system interface of EMUI 3. 1.

Through the screenshot, we can see that the improvement on the interface is quite obvious. The icon adopts a uniform rectangle with large radian and rounded corners. And has adapted to the commonly used application software in the market. Other unsuitable software icons use green rounded rectangles to make the style cartoon and unified. As for the drop-down interface and system interface, EMUI 3. 1 uses more plane elements such as lines as decoration. The virtual buttons at the bottom use triangles, circles and rectangles to replace the traditional back, home and multitasking icons. The overall style has become much smaller and fresher, which will not make users feel redundant. In terms of details, we can see that in terms of fonts, compared with the previous generation, the fonts that are not bold are clear and highlight the lightness of the whole system. The icon shadow has also been slightly adjusted. The shadows become brighter. And in the aspect of color matching of system-level icons, a brand-new warm color icon is adopted, which is not bright, and it looks more comfortable for human eyes and has no dazzling feeling.

In the drop-down menu, we can clearly feel the flat design concept. The notification bar appears at the top left of the screen, and the function of timeline is added to the notification bar, so you can see important information such as missed calls, text messages and emails without opening it, which is quite convenient. Slide from the top right of the screen to display the small switch interface. The icon of the small switch is outlined with thin lines. Generally speaking, it feels very light. Compared with EMUI3.0, 3. 1 improves the small opening and closing of the drop-down menu. Users can slide up and down in the drop-down menu and see more small switches.

The setting interface is divided into two parts: the top bar and the setting part. The top bar is transparent and consistent with the desktop. The Settings menu is divided into two parts-General Settings and All Settings. The style is the same as the drop-down menu, and the content is not much different from the previous generation EMUI. It is worth mentioning that, compared with EMUI3.0, this EMUI3. 1 is based on the deep customization of Android 5.0, and it also changes the art mode to the default mode, and officially supports 64-bit from Android 5.0, which also makes Huawei P8 a real 64-bit mobile phone (both software and hardware use 64-bit).

Long press the screen to bring up the menu, we can see the wallpaper. This time Huawei EMUI 3. 1 is equipped with seven well-made wallpapers. We changed the colorful wallpaper and landscape wallpaper we used before, and adopted a more stable tone. With the black body, we can also intuitively feel the borderless effect of the screen. I wonder if the gold version of the built-in wallpaper is optimized for color. In terms of small plug-ins, Huawei also updated some plug-ins such as clocks. I don't know if more small plug-ins will be added in the subsequent official version. In terms of switching effect, EMUI 3. 1 gives different switching effects in 8 pages, but the author still prefers the default (no effect) switching. In terms of layout, Huawei also gives three layout methods: 4x4, 4x5 and 5x5.

The multitasking menu uses four recent tasks on a single page and can be set to turn pages. Users can quickly switch between several open softwares. And the user can swipe a single task to clear it, or swipe up from the bottom of the interface to create a global sense. Of course, Huawei also provides a small plug-in to clear the cache with one click. In terms of folders, when users open the folder of EMUI 3. 1, the desktop at the back will be dimmed, each page of the folder can store 9 applications, and users can also turn pages in the folder.

For example, the voice wake-up function on Huawei P8 is the most sensitive one I have ever experienced, so that Huawei P8 can find the mobile phone through voice wake-up. As can be seen from the video, even if the mobile phone is placed in the drawer, it can be awakened by voice. However, at present, the voice wake-up function supports fewer commands, only the functions of making phone calls and finding mobile phones. I don't know if there will be any new functions in the future.

Abortion is another major customization function on EMI3.1,and many manufacturers are currently customizing reading. In the folding interface above, users can customize their daily reading sources and social platforms. So that they can browse the information they need in the form of a waterfall in one interface without switching between multiple news and social apps. In fact, this is also a way for major manufacturers to seize the entrance. The content is more suitable for reading after Xiaoyue typesetting.

Of course, EMI3.1also integrates many brand-new functions, such as mobile phone karaoke function, drama-chasing mode, intelligent screen capture and so on, which are all improvements in details compared with EMI3.0. Generally speaking, this time, EMUI 3. 1 uses lines, flat small switches, thinner fonts, reduces the use of very bright colors, and has the same style of APP icons to create a fresh, non-redundant and brand-new UI, which makes users feel lighter and faster. One of my favorite functions should be the knuckle screen capture function. Huawei P8 can recognize the difference between finger belly and finger joint touch screen through a brand-new touch chip, so as to realize the functions of tapping screen capture of finger joints and screen capture of finger joint sliding screen area, and this function is a global function, which can be captured and shared on any software.

In terms of overall style, EMUI 3. 1 continues the simple and flat style of EMUI3.0, but there are also many changes in EMUI 3. 1. Although it is not a brand-new system, the experience has been steadily upgrading.

What is the performance of Kirin 935?

As mentioned earlier, the performance of Huawei Kirin chip has advanced by leaps and bounds in the past two years. In fact, in the traditional sense, the performance of mobile phone processors is nothing more than a few key words: architecture, manufacturing technology and technology. For example, if two CPUs with the same architecture, technology and technology compare the performance of CPU, the performance is directly proportional to the main frequency. Why are Qualcomm Snapdragon series chips sought after by many high-end flagship mobile phones? It is because Qualcomm is one of the few CPU vendors to improve the public architecture of ARM again, and Kriat architecture has become a unique secret of Qualcomm. However, since the beginning of this year, ARM has launched a brand-new architecture more and more times, which makes Qualcomm fully accept the public version architecture and temporarily abandon the Krait architecture, which also brings opportunities for Huawei, Samsung, MediaTek and other manufacturers to occupy the high-end market. At this stage, let's take a look at the performance of this Huawei Kirin 935 processor on Huawei P8.

▲ What is the performance of the new members of the Kirin family? This Huawei Kirin 935 processor on Huawei P8 is an upgraded version of the main frequency of the Kirin 930 processor that was previously unveiled at MWC. Eight nuclear A53 architecture, 28nm technology and HPm technology are adopted, and the main frequency can run at 2.2GHz. We all know that Samsung and Qualcomm have introduced processors based on A57 architecture, which are more powerful. This process starts at 28 nanometers. Why is Huawei Kirin still using the combination of A53+28nm? This question was answered at a new product communication meeting of Haisi Kirin not long ago.

A53 architecture

A57 architecture

A72 architecture

Main frequency (GHz)

1.0

1.2

1.2

Performance (speed 2K/GHz)

500

780

820

Power consumption (mW/GHz)

150

525

44 1

Huawei believes that architecture and manufacturing process are complementary. Huawei found through experiments that the overall performance of A57+A53 core is stronger, and it can run at a higher frequency without limiting power consumption. However, the experimental data also show that the performance of A57+A53 core with 20nm design is 56% higher than that of A53 architecture with 28nm process, but the power consumption is 256% higher. Therefore, Huawei chose A53 architecture with 28nm technology on the latest Kirin 930 processor.

Huawei's Main Software Optimization for 64-bit Systems

1

Optimization of ART 64-bit computer system

2

Memory optimization, such as KSM/ZRAM

three

Framework 64-bit optimization

four

64-bit optimization of image codec

five

Optimization of Android Version Installation Process

six

SKIA 64-bit optimization

seven

Optimization of ART 64-bit compiler

eight

Improved compatibility between third-party applications and games.

nine

Optimization of GPU drawing ability

10

GPU cache optimization

1 1

Hmp scheduling optimization

12

Optimization of file system driver

At the same time, Huawei also has its own layout for the future development of mobile phone processors. First, Huawei has basically determined that it will not use the 20nm HPm process, but will mainly use the 16nm process FinFET process. In the future, it is very likely to skip the A57 architecture and choose the A72 architecture for the brand-new processor, but the above can only be experienced by subsequent products. As we all know, ARM defines A53 architecture as a small core with low power consumption, which is used to handle simple tasks, which also leads to the failure of A53 architecture to run at high frequency. To solve this problem, Huawei has also made improvements, developed its own library, and formed a brand-new A53X architecture, which can finally make the processor run stably at 2.2GHz. In other words, the brand-new Huawei Kirin 935 is a eight nuclear 64-bit processor with quad-core A53X+ quad-core A53. Finally, performance and power consumption are guaranteed. In a word, the performance of Kirin 935 processor is not the same as that of Qualcomm Snapdragon 8 10 and Samsung Orion 7420, but the performance per unit energy consumption is not inferior at all. Moreover, Huawei has also made 64-bit optimization for 300 projects such as ART and Framework, making Huawei P8 truly a 64-bit mobile phone. Previously, we also conducted a detailed running test on the Kirin 930 mounted on Huawei Glory X2. At this stage, we will not test the running software of Kirin 935 on Huawei P8.

What we said before are all keywords of processor performance in the traditional sense. But in fact, any chip manufacturer can achieve almost the same performance as long as it is authorized by ARM. What truly reflects the technical strength of a hardware manufacturer is the overall SOC performance, including the comprehensive strength of network signal, power management, image and audio ISP. How did this perform on Huawei P8? What is the TAS smart antenna adjustment technology mentioned at the press conference?

Kirin 93X series

Products of other hardware manufacturers

2G drops back to 4G speed.

$33.5

2800 dollars

4G falls back to 2G speed

2 1.5 USA

1600 USA

TAS smart antenna adjustment technology has also appeared on Huawei mobile phones and Moto and other smart phones before. As we all know, at present, many smart phones are designed with metal frames, and the requirements for antenna signals are more stringent. The upper and lower injection molding strips on Huawei P8, and the plastic isolation belt between the front screen and the frame are all overflow ports of antenna signals. But once these overflows are blocked by hands, there will still be short-term poor signal. At this time, TAS smart antenna adjustment technology was born. When a user holds a mobile phone to block a part of the antenna, Huawei P8 will automatically switch to the received part of the antenna to continue working. The time difference of this handover is maintained at the American level, while the products of other manufacturers are hundreds of times faster than Huawei P8 in the process of switching again. Such small details are reflected in Huawei P8.

The communication experience in the high-speed rail scene is better than other mobile phones.

4g is superior to other mobile phones in online time and speed.

The delay of 4G online games is better than other mobile phones.

The success rate of network 4G weak signal is better than other mobile phones.

In fact, these small details will inadvertently affect our goodwill towards a brand. Through this part of the article, I think everyone can understand why Huawei P8 adopts Kirin 935 processor. If this processor is defined, I think there is still a gap between this processor and mainstream flagship chips in CPU performance, but there will be no jamming phenomenon when running software games. In terms of signal processing, Kirin chipset can be said to be the most suitable chipset for Chinese people.

screen test

On the screen, Huawei P8 is still equipped with a 1920* 1080 resolution screen, but it is not equipped with a 2K resolution screen. The reason for this is that Huawei explained a long time ago that Huawei is more interested in the power saving ability of 1080P screen than 2K screen. Of course, the screen output of 1080P will also relieve the pressure on the processor and make the system and software run more smoothly. However, although the screen of Huawei P8 has not been upgraded in specifications, it has been significantly improved in actual performance.

By comparing with Huawei P7, we can see that Huawei P8 has no obvious improvement in brightness, but has obvious improvement in three primary colors display and viewing angle. It is worth mentioning that Huawei P8 is also better than Huawei P7 in the diagonal perspective of death.

Evaluation summary:

At the end of the article, the author wants to declare that all the tests are based on Huawei P8 carbon black high version engineering machine, and the system version number is B039. Due to the short starting time, the author only makes a simple evaluation from the aspects of industrial design, EMUI 3. 1, camera experience, screen experience and hardware experience. In the future, we will conduct targeted tests on P8 according to different aspects that users care about. Please leave a message and ask questions. In view of these aspects, the author summarizes several highlights for Huawei P8:

Summary of highlights of Huawei P8

The environmental protection packaging design is amazing.

The appearance industrial design and workmanship have reached the leading position in the industry at present.

Intelligent screen capture function is the best screen capture sharing function at present.

Intelligent voice wake-up function is the highest recognition rate in the industry at present.

The camera function improves the camera strength in dark environment from the hardware level.

Signal algorithm is most suitable for China people.

Through MATE7, Huawei not only proved that the mobile phone market of more than 3,000 yuan is still a blue ocean, but also proved that domestic mobile phones have the strength and confidence to occupy the market of more than 3,000 yuan and can fight head-on with international first-line brands. The success of Mate7 indirectly led many consumers, including the author, to expect Huawei P8. From the product level, Huawei P8 is indeed a classic product of the year, but the problem Huawei is facing now is that Huawei P8 is facing a large number of 5-inch screen high cost-effective mobile phones. In this range, consumers can choose more fine products than the big screen market. Whether Huawei can gain a firm foothold with brand and product advantages still needs to wait for market feedback, but what is certain is that Huawei is currently taking a boutique route among domestic mobile phone manufacturers.