My first car inspection, what procedures should I take?

1. Original motor vehicle driving license, complete cards, and complete vehicle inspection records.

2. Bring the complete insurance policy and the original and copy of the compulsory traffic insurance. The copy will be retained by the vehicle inspection station.

3. Make several copies of your personal ID card, with the white edges trimmed off, for later use.

4. Make a copy of all insurance policies for backup.

5. Documents such as road maintenance fees are not required.

After preparing the above vehicle inspection procedures, you should also pay attention to the following points:

1. What do you need to bring for vehicle inspection?

1. Driving license, 2. , Original copy of compulsory traffic insurance, 3. Original ID card of the car owner or agent, 4. Triangular warning sign, fire extinguisher (passengers with less than 9 seats are not required to bring a fire extinguisher) 5. Sufficient RMB, 6. Car,

2. What do you need to bring for annual motor vehicle inspection?

For annual motor vehicle inspection, you need to prepare a series of materials, including ID card, driving license (including copies of driving license and body photo), copy of compulsory traffic insurance, green Environmental protection signs, of course, are also indispensable for vehicles to be inspected. In addition, if the vehicle has a violation record, it needs to pay a traffic violation fine before it can be successfully inspected

3. Vehicle inspection process

1. Confirm whether there is a violation record and whether the compulsory traffic insurance has been paid. and vehicle and vessel taxes. If so, quickly go to the traffic police detachment where you settled to pay the fines and related taxes

2. Prepare for work. The car body is washed, and all the personalized logos and slogans that I put on are cleaned. Check warning tripods, fire extinguishers, seat belts, etc., and repair any defects first.

3. Make an order and pay the fee. Drive the car to the inspection center and swipe the vehicle identification card. The staff will print out a list for you. Take the printed list to pay the fee and stamp it

4. The vehicle inspection begins. First, the appearance of the car body will be checked, then the exhaust emission test will be carried out. After passing the test, the braking system, lights, chassis, etc. will be checked. After you are all qualified, you will be issued an environmental certificate and a qualified form. Take the qualified form and a copy of the compulsory traffic insurance to the traffic police detachment to have it stamped, and get the annual inspection certificate.

Four, 8-point guarantee for new car annual inspections Passed the car inspection smoothly

Note on the car inspection process 1: Body stickers

In order to show their personality and beautify their cars, many car owners are accustomed to putting some personalized stickers or car friends on the car body. Know the car logo. There has been a saying on the Internet that if the area of ??the car body sticker does not exceed 30% of the total area of ??the car body, it will not affect the normal vehicle inspection. Here we can tell you in person based on relevant regulations and personal experience that any car sticker or label, no matter how small it is, is not allowed to pass the vehicle inspection. However, there are exceptions, such as "internship" labels that have been filed and approved by the public security organs. Legal car stickers are allowed. If you bought a new car, don't put your favorite sticker on it immediately. You need to put it on after the registration is completed.

Note 2 during the vehicle inspection process: The car body is too dirty

Everyone is very busy nowadays, and vehicle inspections are often done in time. Individual car owners may not notice that their vehicles are very dirty. Dirty, even if they realize that their car is dirty, they will not care too much. They think that as long as the procedures are complete and the vehicle is inspected, it will not be a problem. This is not the case. Vehicles that are too dirty will have an impact on the inspection of the appearance and chassis parts, and vehicle inspection requires photos. Therefore, if the vehicle is too dirty, the inspector will not take photos, so it will not pass the appearance inspection. This also applies to vehicles that are too dirty. New car license plates.

Note 3 during the vehicle inspection process: Whether the insurance has expired

It is necessary to bring the original insurance when inspecting the vehicle. I believe everyone is familiar with this. For most car owners, the time for vehicle inspection is It is the same time as the insurance expiration. What needs to be noted here is that many friends have extended the insurance for a new year before the insurance expires. The old insurance may not have expired when the car is inspected, and the new insurance has not yet taken effect. At this time, you must Bring the original policy that is still valid, that is, the old policy, to the vehicle inspection, otherwise the ineffective insurance will not pass the inspection. Of course, these are only for compulsory traffic insurance. Compulsory traffic insurance is necessary for vehicle inspection, and commercial insurance is not required for the time being. When registering a new car, you must purchase compulsory traffic insurance!

Note 4 during the vehicle inspection process: Triangular window film

Film is the first task for many car owners after purchasing a new car. According to regulations, glass film is It does not affect the vehicle inspection, but the film cannot be applied to the corners of the front window triangle. Good light transmittance needs to be left here to facilitate the driver to observe the rearview mirrors on both sides. Therefore, once the film is applied here, it will not pass the inspection. car.

If the vehicle does not have a triangular window, sufficient area must be reserved when attaching the mold. The film needs to be applied after the new car is registered.

Note 5 during the vehicle inspection process: Tire size changes

Under normal circumstances, a vehicle will need to replace tires after driving about 70,000 kilometers. At this time, many car owners will change to a different brand, or change the tire size to a new one. Targeted functional tires are used to improve different driving needs. This situation is relatively common among SUV owners. However, it should be noted that the replacement tires must be exactly the same size and model as the original car, otherwise even if the wheel hub style remains unchanged Even if the model changes, it cannot pass the vehicle inspection. Our Haval bus has encountered such a thing. Due to negligence when replacing the tires, the tire width was different from the original car, and the other parameters were exactly the same, but it failed to pass the vehicle inspection.

Note 6 during the vehicle inspection process: Appearance does not match the photo

Appearance modifications cannot pass the vehicle inspection. I believe many people know that, but some practical configurations are lightly added, such as SUV modifications. Bumpers, luggage racks and other parts that we think are better for safety or driving aspects cannot pass the vehicle inspection. In addition, there are many models that have the effect of changing their logos to look fake and real. For example, BYD's practice of replacing Toyota logos will not pass the vehicle inspection. Simply put, as long as it does not match the driving photos, it will be regarded as cosmetic modification.

One more thing to note here is that if the body markings on your car have fallen off, don’t worry about failing the vehicle inspection, because the relevant regulations clearly indicate that natural falling off of body markings will not affect the vehicle inspection. However, Just don't add a logo.

Note 7 in the vehicle inspection process: Whether the violations have been dealt with

Many friends will prepare the required materials before inspecting the vehicle again. At this time, they focus on the vehicle identity information. Unaddressed violations are often overlooked. According to regulations, if the violation is not cleared in time, although it can pass the inspection of appearance, exhaust gas, etc., the final "inspection" sign cannot be collected until the violation is resolved.

Note 8 in the vehicle inspection process: There is damage to the appearance

Scratches and scratches are inevitable in daily use of the car. Many car owners simply do not repair minor injuries due to various reasons. In most cases, these It does not affect the vehicle inspection, but some serious scars may increase the difficulty of passing the appearance. It is recommended that obvious scars be repaired in time before the vehicle is inspected.

Extended information

1. Apply for a parking space certificate (urban area) at the Publicity Section of the local transportation brigade and fill in the motor vehicle registration form.

2. Carry out buying and selling transactions with car dealers.

3. Industrial and commercial verification.

4. Go to the insurance company to apply for insurance.

5. Go to the acquisition fee collection and management office to pay the acquisition surcharge.

6. Fill in the stolen motor vehicle at the designated motor vehicle inspection site