Safety management system of mixing station?

I. Equipment management Equipment safety management adheres to the principle of "safety first, prevention first", constantly updates and improves the level of safety technology, promptly and effectively eliminates unsafe factors in equipment operation, and ensures project property and personal safety. 1, always pay attention to the mechanical instrument indicator light of the mixing station to ensure the safe operation and daily maintenance of the machinery; 2. Strictly use electrical equipment. Philippine personnel are not allowed to start the switch and use unqualified electrical appliances. 3, mixing station equipment safety inspection specialist is responsible for, the equipment failure in the bud; 4. Adhere to the principle of "safety first" in the procurement of equipment and accessories, and put an end to the use of products without site, production certificate and production date; 5, mixing station site and surrounding environment to ensure the safe work of machinery, high voltage cables and other erection away from the mixing station; 6, mixing station work area set up safety operation procedures and other obvious safety signs; 7. Work closely with the local climate department, pay attention to the weather forecast every day, and take timely measures to prevent wind and rain when it is windy and rainy, so as to improve the wind resistance of the mixing station; 8. In the event of mechanical equipment accidents, the "three-no pass" should be achieved: units and individuals who have made outstanding achievements in accident prevention should have clear reward and punishment measures, and safety responsibilities should be linked to economic responsibilities. Second, personnel management The management of equipment operation and maintenance personnel adheres to the people-oriented principle, improves the sense of responsibility and enthusiasm of management personnel, and "the equipment is in the charge of a special person and co-manages with * * * *", and is carefully maintained to ensure the safety of the equipment. 1. Strictly implement the relevant provisions of the safety management system of the project department. The project manager is the overall person in charge of mechanical safety and the "first safety officer". The responsibilities of all personnel in the mixing station are clear, and everyone is divided according to their responsibilities. If someone is transferred from a professional post, a new person will be appointed immediately; 2, all kinds of mechanical operators must be trained by professional technology and safety operation procedures, and after passing the examination to obtain the operation certificate, can operate independently. The training content includes equipment principle, structure, operation method, safety precautions, maintenance knowledge, etc. 3. Obey the arrangement of the stationmaster and the construction commander, and operate the machinery correctly. Operators have the right to refuse to carry out orders that violate mechanical properties, safe operating procedures and may cause accidents; 4, post operators strictly abide by the safety operation procedures, do not leave; 5. Wear safety helmet and corresponding safety protection articles according to regulations; 6, all kinds of maintenance personnel should improve their safety awareness and technical service quality, to achieve qualified mechanical operation, management park 3, electricity management 1, to participate in live-line operations, must undergo special training and pass the examination before they can operate, and they are allowed to engage in operations; 2. Regularly check the safety technology of electrical operators. If the electrical work is interrupted for more than three months for any reason, they must re-learn the relevant electrical operation procedures, and only those who pass the examination can resume electrical work; 3. Safety devices, leakage protection devices or electrical safety interlocking devices and signal devices must be installed in the distribution lines of the construction site; 4. The starting end of each branch line on the distribution line must be equipped with a circuit breaker and effective short circuit and overload protection; 5. The distribution transformer should be fenced and kept clean, and no pillars should be planted; 6, must be carried out in accordance with the procedures to stop, send points, it is forbidden to load or fault load, stop, send high voltage lines, thunderstorm weather shall not be carried out to switch operation and replace the fuse. Four. Marking management 1. At the construction site, people need to be reminded of safe places, and safety signs must be set up in eye-catching places, mainly hanging "high voltage danger!" Warning; At the entrance of the construction road, there is a sign saying "Please wear safety helmet when entering the construction site"; Other signs such as "under repair" are hung in the maintenance of the distribution room to remind people of the main unsafe factors and prevent accidents; 2. Safety signs purchased and manufactured by the Project Department must be loaded with GB2893-82 safety colors, GB2894- 1996 safety signs, GB16179-1996 safety signs and other relevant regulations; 3. The height of the signboard should be as consistent as possible with the height of the human eye. The angle between the signboard plane and the line of sight should be close to 90 degrees. When the observer is at the maximum observation distance, the maximum included angle should not be less than 75 degrees; 4. Don't put signs on movable objects such as doors, windows and shelves, so as not to see safety signs after the positions of these objects move; No obstacles that hinder reading shall be placed in front of the sign; 5, the layout of the site safety signs should be designed first, then layout, reasonable safety signs and layout according to the design number; 6. Safety signs on the construction site shall not be moved at will. If it is really necessary to move, it must be approved by the original designer and put on record. 7, sign check at least once a month, if found damaged, deformed, faded, etc. Do not meet the requirements should be corrected or replaced in time; 8, the project department will assign personnel to manage the site signs, and severely punish those who damage and steal signs; 9, after the completion of the project, the project department unified collection, storage signs, for the use of subsequent engineering construction.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd