How to create a grid oblique head family in Revit

How to create a grid oblique head family in Revit? Let's share with you a simple tutorial for Revit to create a grid oblique head family. If necessary, you can learn about it. I hope it helps you.

Open Revit, create a new family, select the "metric axis grid header" family template in the Notes folder, and then enter the family editing environment. First, delete the precautions and dotted lines in the template; Click the Line tool under the Create tab, first draw a circular title line, select the drawn line, check whether the center mark is visible, lock the circular alignment on the horizontal and vertical reference planes, and add a text size label parameter for the circular radius; Named as the title radius;

Draw a diagonal line, first draw a 45-degree straight line from the center of the circle, align and lock the starting point of the straight line at the circular position, mark the angle value and lock it, and draw a straight line on the other side in the same way;

Click the Label tool under the Create tab, and then click Place to open the Edit Label dialog box, where you can create two new parameters: the major axis network and the minor axis network;

Add two labels to the header and adjust the position and size appropriately (click the labels and click Edit Type to change the background to transparent in the Type Properties dialog box, and the background area of the text will not be displayed in the project);

Save the grid header family and load it into the project. During use, you will find that the number of axes shows two question marks and cannot be edited. At this point, you need to create * * * parameters in the project to be identified and associated. Click "Project Parameters" under the "Management" tab, add two newly created * * * enjoyment parameters, and select the corresponding category as the grid; At this time, you can edit the shaft number;

Sometimes the main title and subtitle are opposite to the drawing. This problem occurs because the order of drawing the grid is reversed, so you can draw the grid again in the opposite direction.

These are the graphic steps for Revit to create the inclined head family of vertical shaft network, which Bian Xiao explained. More exciting information in deep space games.