Safety and Environment Department Safety Officer Job Responsibilities

Job Responsibilities of Safety Officers of the Safety and Environment Department (10 general articles)

In today’s social life, there are more and more occasions where job responsibilities need to be used. Job responsibilities refer to workers Specific work content, responsibilities, and standards required by superiors, and complete tasks assigned by superiors. How should job responsibilities be appropriately formulated? The following is the job responsibilities of the safety officer in the safety and environment department that I have carefully compiled. I hope it will be helpful to everyone.

Job Responsibilities of the Safety Officer of the Safety and Environmental Protection Department Part 1

1. Formulate the safety management plan of the project department based on the company’s safety objectives, be responsible for the comprehensive safety management of the project department, and follow the instructions of the Engineering Department Prepare safety plans, safety technical plans and other specific safety measures and conscientiously implement them.

2. Organize safety inspections and safety spot checks of the project department from time to time, discover potential accident hazards, issue rectifications of safety hazards, and supervise the completion of rectifications in a timely manner.

3. Responsible for proposing preventive measures against dangerous sources and formulating and implementing emergency rescue plans.

4. Regularly organize safety education for all employees participating in the project department, organize pre-shift safety education activities, and keep safety records.

5. Carry out safe construction in accordance with the safety control measures for individual projects prepared by the company's engineering department.

6. Do a good job in issuing and registering labor protection supplies, ensure the correct wearing of labor protection supplies, and ensure safe and civilized construction on site.

7. Do a good job in on-site fire safety management, implement the maintenance and management of fire-fighting equipment; do a good job in safety management during the use of various machines and equipment, and implement safety control in all aspects.

8. Regularly report work status to the safety department of the company's engineering department.

9. Complete other tasks assigned by the leader. Safety Officer Job Responsibilities of the Safety and Environmental Protection Department Part 2

1. Safety officers must obtain a safety officer certificate issued by the construction authority. Under the leadership of the project manager and superior authorities, the employees of the project department are urged to conscientiously implement the safety laws and regulations promulgated by the state and the safety rules and regulations formulated by the enterprise.

2. Participate in the project construction organization design (project quality plan) and the preparation of special safety construction plans and safety technical disclosures, and be responsible for the implementation of special safety construction plans and safety technical disclosures; participate in hazard factors and environmental Identify and evaluate factors, establish an education and training registration system, and carry out safety education work. Ensure the safety protection facilities are in place and strictly supervise and implement the civilized construction management system.

3. Carry out safety and environmental supervision over the entire construction process, be responsible for the requirements for safe production and civilized construction in the quality, occupational health and safety, and environmental management systems, and be responsible for implementing the safety and environmental management systems. The relevant provisions of operational control are in good operation in the project department. Keep internal audit records and close unqualified items.

4. Inspect the construction site and each process every day, understand the situation of key safety parts, check the safety hazards discovered, correct them in a timely manner or issue a rectification notice for safety hazards, and review the implementation process of correction and prevention. Carry out follow-up inspections on implementation effects and make verification records; point out illegal command and operation violations to the person responsible on the spot and make corrections immediately. When necessary, penalties will be imposed in accordance with relevant company regulations; if major safety hazards are discovered, they have the right to immediately stop the operation and report to the leadership in a timely manner, and organize workers to evacuate the dangerous area.

5. Organize the installation of various safety protection facilities, participate in the inspection and acceptance of safety protection facilities, mechanical equipment installation, power supply, etc. by the branch and the company, and complete the filling of safety materials.

6. Supervise the quality of labor protection supplies and safety protection devices, and guide workers to correctly use safety protection devices and personal labor protection supplies.

7. If a work-related accident occurs during the construction process, timely rescue of the injured should be organized, dangers should be eliminated, signs should be made, the site should be protected, and the time, place, number of casualties, and cause of the accident should be reported Report the situation to the project manager or superior, and cooperate with relevant departments to investigate the accident.

8. Commend and recommend workers and work teams who model compliance with rules and disciplines in safe production. Responsible for internal and external information collection and feedback.

9. Participate in regular safety production and civilized construction inspections organized by the project department, branch, and company, receive supervision and inspections of safety production and civilized construction by provincial and municipal security inspection and other relevant departments, and identify potential safety hazards and environmental factors and other issues, timely organize relevant workers to correct or supervise the rectification to be completed within a time limit.

10. Complete other tasks assigned by the project manager. Safety Officer Job Responsibilities of the Safety and Environment Department Part 3

1. Conscientiously implement the relevant guidelines, policies and rules and regulations of the company and superiors, keep abreast of the safety production status of the project at any time, and frequently exchange safety information with the competent authorities.

2. Assist the project manager to prepare the safe and civilized construction organization plan and operational measures for the project, assist in improving the safety production responsibility system of the construction class, and provide safety education throughout the construction process.

3. Assist the project manager and foreman to provide safety technical consultation and implement the team’s pre-work safety activities.

4. Check the safety implementation of the construction process at any time, the safety protection and safety equipment are complete, qualified and reliable, and carefully fill in the safety acceptance record and rectification notice.

5. Have the right to correct illegal operations during the construction process and impose illegal penalties.

6. Responsible for collecting and organizing safety information, summarizing and reporting safety reports, assisting the project manager in organizing accident analysis meetings within the authority, and controlling project safety indicators. Job Responsibilities of Safety Officers of the Department of Safety and Environmental Protection Part 4

1. Earnestly study and implement the policies, decrees, regulations, safety operating procedures and safety production systems formulated by the company on production safety and labor protection promulgated by the country, provinces and cities , and supervise its implementation;

2. Regularly conduct publicity and education on production safety to employees, do a good job in specific safety education for new workers and apprentices, and promptly supervise and inspect the safety of each team and type of work Implementation status of safety education;

3. Explain the safety technical measures of participating units’ projects and propose specific plans and measures for implementation;

4. Follow safety operating procedures, safety standards and Requirements, combined with actual conditions, to correctly and reasonably arrange and arrange safety work in various operations;

5. Go deep into the construction site, timely understand and master the implementation of safety production, discover illegal operations and unsafe hazards, Immediately propose improvement measures;

6. Responsible for organizing safety self-inspections, mutual inspections of each team and monthly inspections of the construction team, and promptly providing analysis reports and handling opinions for problems discovered through inspections;

7. Participate in the investigation and analysis of work-related injury accidents, assist relevant departments in handling accidents, keep accident statistical accounts, and fill in safety production reports on time;

8. Have the right to take action against violations Those who direct and violate regulations must stop them. If there are major hidden dangers, they have the right to suspend production first, and can only resume operations after rectification is passed. For those who violate regulations and labor protection laws, if dissuasion fails, they have the right to take economic measures and report to higher levels. ; The right to inspect the operation certificates of special types of work, and those who work without certificates may stop their work.

9. Complete other tasks assigned by the leader. Safety Officer Job Responsibilities of the Safety and Environment Department Part 5

1. Seriously participate in the study and training organized by the superior department.

2. Understand and master the relevant policies and common sense of school safety management, and strive to improve the level and ability of your own school safety management.

3. Actively participate in school safety management and often provide suggestions and suggestions to the principal. Assist the school in implementing various safety tasks.

4. Assist the school to establish and improve the school safety work system, and guide and urge relevant departments and responsible persons to strictly implement it:

5. Regularly organize and carry out safety education and training work, as required by superiors Implement various tasks and continuously improve the safety awareness, management level and skills of faculty and staff.

6. Organize and carry out campus safety hazard inspections, and implement safety self-examinations at the beginning of each semester, before winter and summer vacations, and before holidays in accordance with regulations. The investigation results will be reported to the principal in a timely manner, and reasonable suggestions for solving potential safety hazards will be put forward.

7. Supervise relevant departments and responsible persons to promptly rectify and eliminate hidden dangers, and have the authority to stop behaviors that may cause safety accidents. Under the leadership of the principal, participate in the investigation and handling of various accidents in the school.

8. Assist the principal in charge to continuously improve the school’s emergency plan and carefully organize school emergency drills.

9. Report all types of safety information in a timely manner as required: monthly safety reports required by superiors, outing reports for teachers and students, reports on major safety matters, safety work information, etc. Take the lead in keeping school safety management files and accounts to ensure that safety management work is well-documented and procedures are standardized.

10. Pay attention to theoretical and practical innovations in safety management, and explore effective practical experiences in school safety management. Safety Officer Job Responsibilities of the Safety and Environment Department Part 6

1. Formulate safety regulations and civilized construction standards, and formulate relevant standards according to project requirements and national regulations.

2. Handle pre-start safety supervision and approval and safe start approval, prepare a project safety supervision plan, report safety measures and safety construction points of sub-projects, and handle safe start approval in a timely manner to ensure the smooth start of the project.

3. Investigate and study unsafe factors in production, put forward suggestions for improvement, participate in the review of safety technical measures and plans, and supervise and inspect the implementation.

4. Safety publicity, education and management work, assist in formulating and supervising the implementation of safety technical training, participate in the design of relevant construction safety organizations and the installation, use and acceptance of various construction machinery, supervise and guide electrical lines and individuals Proper use of protective equipment.

5. Stop illegal operations and illegal command, and when major hidden dangers are discovered, when there is a conflict between safety and progress, safety must be the first priority, have the right to suspend operations, evacuate personnel, and report to superiors in a timely manner Report and provide suggestions and measures for improvement.

6. Handling of injury accidents at the construction site. When an accident involving serious injury or above occurs at the construction site, the company should go to the site to organize rescue, protect the site, report the accident situation to the company in a timely manner, and conduct statistics, analysis and reporting of work-related injuries.

7. Routine supervision and inspections should include on-site safety protection, road transportation, feng shui piping, supporting nets, mechanical equipment, electrical wiring, ventilation and dust prevention, asking questions, fire and explosion prevention, etc., whether Comply with safety management regulations. If any unsafe hazards are discovered at the construction site, improvement measures should be promptly proposed and the improved facilities should be inspected and accepted.

8. Fill in the shift report on the safety inspection of the construction site to ensure the safety of the next shift's construction operations, and regularly prepare the job responsibilities of the safety officer of the Safety, Safety and Environment Department 7

1. Model Properly implement the various rules and regulations on production safety and relevant safety requirements put forward by leaders, assist the team leader in the safety work of the team, and understand the professional guidance of full-time safety officers.

2. Assist the team leader to organize safety learning for the whole class, strengthen daily safety education and publicity work, and provide safety education for new workers.

3. Reflect the safety production status of the team and the requirements of employees, and assist in the implementation of improvement measures.

4. Manage the team’s safety tools, facilities, signs and other equipment. Responsible for the management of on-site firefighting equipment, switch boxes, safety warning signs, slogans and other items; ensuring that they are intact and effective, and ensuring that evacuation passages and safety exits are smooth.

5. Timely discover and deal with hidden dangers of accidents, promptly report hidden dangers that cannot be dealt with, and have the right to stop illegal operations, and the right to resist and report illegal command behaviors beyond the level.

6. Check the use of safety protective equipment for on-site construction workers; check and evaluate whether safety supplies and labor protection supplies meet the standards, and supervise the implementation of preventive measures; be responsible for the statistical reporting of casualty accidents and participate in accident investigations, Do not conceal the circumstances of the accident and strictly implement the "four no-misses" principle.

7. Responsible for safety management within their respective management scope. Assist the safety leading group in the implementation of safety production rules and regulations.

8. When hidden accident hazards are discovered, personnel are promptly organized to deal with them. Once an accident occurs, it should be reported to the safety leading group of the project department in a timely manner, and on-site rescue should be organized immediately to participate in the investigation and handling of casualty accidents.

9. For special operations personnel, they must strictly follow the "Special Operations Personnel Safety Technical Training and Assessment Management Regulations" issued by the Ministry of Labor with certificates. Unlicensed operations are strictly prohibited, and relevant personnel are urged to obtain the "Special Operations Personnel Safety and Technical Training and Assessment Management Regulations" issued by the Ministry of Labor. "Operation Certificate", special operations personnel will be reviewed every two years. Those who fail the review will not be allowed to work.

10. Responsible for on-site polite construction management: spoil covering, material removal after completion, on-site cleaning, watering, polite dressing, migrant workers dormitory management, migrant workers canteen inspection and management, and material stacking.

11. Responsible for the safety management of on-site traffic, electricity and underground pipelines.

12. Familiar with major hazard sources and risk points, and manage them accordingly according to protective measures; implement safe termination rights, have the right to stop anyone's illegal behavior, assume project safety and polite construction management responsibilities, and work part-time in safety Workers must constantly check every aspect of production to avoid any omissions that may cause losses. Safety and Environment Department Safety Officer Job Responsibilities Chapter 8

Responsibilities:

1. Be familiar with the construction drawings carefully, cooperate closely to inspect the construction safety of project parts, and correct problems in a timely manner if problems are found;

2. Assist the project manager to prepare construction site safety management measures to effectively control project safety;

3. Check the safety situation of the construction project, propose rectification suggestions, and supervise the completion of rectifications;

4. Responsible for the preparation and management of project safety information;

5. Participate in accident investigation, handling and analysis, and propose corrective and preventive measures;

Job requirements:

1. Bachelor degree or above, safety engineering, civil engineering and other related majors, under 35 years old;

2. Engaged in construction safety management for more than 3 years, with experience in construction site safety management, familiar with Master the construction safety standards and standards, and be able to establish safety management accounts. Priority will be given to those with Party A management experience;

3. Possess national registered safety engineer/safety officer C certificate, proficiency in using office software, and good writing skills . Safety Officer Job Responsibilities of the Safety and Environment Department Part 9

1. Actively implement the relevant national laws, regulations, guidelines and policies on production safety, and comprehensively manage the daily work of production safety in the unit.

2. Assist the unit to establish and improve the safety production responsibility system, safety production management rules and regulations, and operating procedures, and implement various specific work on safety production;

3. Regularly or irregularly conduct in-depth At the workplace, organize various safety inspections, keep inspection records, put forward rectification suggestions for hidden dangers discovered during inspections, and supervise the implementation of rectifications.

4. Organize the unit’s safety production publicity, education and training; coach *** safety officers to learn safety professional knowledge.

5. Formulate annual and quarterly safety work plans, and actively do basic work such as collecting, sorting, keeping, handing over the unit's safety production archives and filling in various reports;

6. Assist units to formulate comprehensive emergency plans, special emergency plans and on-site disposal plans for production safety accidents, and organize drills.

7. Participate in the investigation and handling of production safety accidents, be responsible for accident statistics and analysis reports, assist relevant departments in making recommendations to prevent accidents and supervise their implementation.

8. Upload and distribute production safety documents and provide timely feedback on various situations related to production safety.

9. Be familiar with using the "Safety Standardization Management System" to manage daily safety production work.

10. Comprehensively and in-depth understand the unit’s safety production work, report relevant situations, existing problems and deficiencies to the department head, and put forward opinions and suggestions; Job Responsibilities of Safety and Environment Department Safety Officer 10

1. Conscientiously implement various national laws and regulations on production safety and labor protection, and do a good job in publicity, education, supervision and management of safe construction.

2. Organize safety education and training for special operations personnel throughout the construction process, and complete the third-level education tasks.

3. Create a safe construction site, implement fire protection measures, and arrange "five rows and one map" and various prohibition signs.

4. Inspect the production safety situation at the site at any time, eliminate potential accidents in a timely manner, and stop illegal operations and illegal command.

5. Supervise on-site personnel to abide by regulations and laws, supervise the implementation of rectification tasks, and ensure safe production and civilized construction.

6. When a major safety accident or fire accident occurs, take the initiative to protect the site, organize rescue efforts, report to the project manager in a timely manner, and do a good job in the aftermath according to the principle of "four no-misses".

7. Collect safety information in a timely manner, fill in safety information and safety diaries, and summarize and archive them by category upon completion. ;