Hurry! ! Report on social practice of architecture

This time, I was lucky enough to visit the expansion project of xxxxx. When I went there, most of the construction there was nearing the end, but some parts were only half finished. As soon as I arrived at the construction site, I saw the living area of the construction site. It was also written on the door of the construction area that no one can enter the construction site without bags. Of course, the slogan "Safety responsibility is more important than Mount Tai" was written on the protective net outside the main structure of the information building. It can be seen that in building construction, the first problem to be paid attention to is safety. In the past, many work-related injuries and death accidents were caused because the production enterprises did not pay attention to the safety of migrant workers, which brought great losses and injuries to workers and enterprises. At the same time, in order to ensure the smooth progress and safety of construction, the construction site should be surrounded by brick walls, and only all kinds of vehicles and internal personnel of construction can enter and leave.

following my uncle, who is the project manager, wandering around the construction site, we stepped on a ladder made of steel pipes and iron nets, and began to feel very dangerous, with steel pipes or iron bars sticking out all around. The formwork and supports on the second and third floors have been removed, and we can clearly see that the pillars supporting the upper weight are so big that we all feel that the height of the floor is smaller. There are many constructional columns around the load-bearing columns, which are used to increase the strength of the wall to avoid easy collapse due to the long wall body. Along the way, we saw that the supports of the above floors have not been dismantled. These supports are made of steel pipes and templates. The steel pipes are very dense, so it is obvious that it takes a lot of support to bear the concrete slabs and beams with no strength at all. I watched him check the completed house, but I didn't understand anything. I asked him what he was looking at and why he wanted to see it. As time goes on, the more questions are asked. I think I've been studying in college for half a year, so I feel like I haven't learned anything. I don't know if this is a personal problem or if everyone is the same.

Next, take me to see their workers mixing concrete on site. The cement used by their workers has passed the stability test. Through the understanding and study of concrete, I generally know some information about a material that is almost inseparable in modern architecture: (1) Concrete is one of the most important civil engineering materials in the contemporary world. It is an artificial stone material which is prepared by cementing material, aggregate and water according to a certain proportion, stirred and vibrated, and cured under certain conditions. Concrete has the characteristics of abundant raw materials, low price and simple production technology, so its usage is increasing; At the same time, concrete has high compressive strength, good durability, a wide range of strength grades and a wide range of applications. It is not only used in various civil engineering, but also in shipbuilding, machinery industry, marine development and geothermal engineering. Concrete is also an important material. (2) Early curing of concrete: Most of the common cracks in mixed nun soil are surface cracks with different depths, which are mainly caused by temperature gradient and sudden temperature drop in cold areas. Therefore, the protection department of concrete is particularly important to prevent early cracks on the surface. From the point of view of temperature stress, moisturizing should meet the following requirements: 1) prevent the temperature difference between inside and outside concrete and the gradient of concrete surface, and prevent surface cracks. 2) To prevent concrete from freezing, we should try our best to make the lowest temperature of concrete during the construction period not lower than the stable temperature of concrete during the use period. 3) Prevent the old concrete from supercooling, so as to reduce the constraints between the new concrete. The main purpose of early curing of concrete is to maintain suitable temperature conditions, so as to achieve two effects. On the one hand, it can protect concrete from adverse temperature and humidity deformation and prevent harmful cold shrinkage and dry shrinkage. On the one hand, the hydration of concrete is carried out smoothly in order to achieve the designed strength and crack resistance. Appropriate temperature and humidity conditions are interrelated. Moisturizing measures of concrete often have moisturizing effect. Theoretically, the moisture contained in fresh concrete can completely satisfy the hydration of cement, and the surface concrete is most easily and directly affected by this adverse effect. Therefore, the first few days after concrete pouring is the key period of maintenance, which should be paid more attention to in construction. Therefore, during the construction, we should handle these incidents cautiously and handle them according to different situations.

As a college student who has just come into contact with professional knowledge, it is unscientific to come into contact with profound professional knowledge directly before studying professional courses, so it is necessary to make a good summary after the internship.

The so-called practice is the only criterion to test the truth. Through standing by, I have observed the whole building construction process closely, so that I can meet the builders face to face, see how they construct and how to turn the model on the drawing into a beautiful building, and learn a lot of applicable and specific construction knowledge, which is often very important and basic knowledge that I seldom touch and pay attention to at school, which is often something we seldom touch at school.

Although the knowledge acquisition is very small, the practical experience gained will benefit me for life, which will be constantly verified in my practical work after graduation. I will continue to understand and appreciate the knowledge I have learned in my internship, and I will continue to apply the theoretical knowledge and practical experience I have learned to my practical work in the future to fully demonstrate my personal value and life value. Strive to realize my ideal and bright future.

Actually, as a student, I want to study not to pass the final exam, but to acquire knowledge and work skills. In other words, studying in school is to adapt to the needs of society, and to ensure that I can finish my future work and make contributions to society through study. However, there is a big gap between stepping out of the ivory tower and stepping into the society. It is a blessing for me to be able to practice as a buffer. Through practice, I know the actual needs of my work, which makes the purpose of learning more clear and the effect is correspondingly better.

In the next three and a half years of college study, I will study my professional knowledge harder and enrich my other knowledge. After the internship, I found that knowledge is interlinked, and it is difficult to be proficient in everything, but it is necessary to make great achievements, so I must learn more professional knowledge related to my major in the future, and try to take two degrees on the basis of learning this major well, and I must do more. Turn theoretical knowledge into real ability, do my best, work hard, improve my knowledge reserves and complete my life. I will use this limited time to complete unlimited possibilities!

I think, if I have the chance, I will go to the construction site for internship every holiday in the future and learn more knowledge that I can't learn in textbooks. That's real wealth.