Operating rules for safety technology of hot strip mill in hot continuous rolling.

1. When the operators of each rolling mill hear the start signal of rolling mill ringing, they should immediately stand in a safe position, and it is forbidden to stay in the dangerous area of continuous rolling mill.

2. During the operation of the rolling mill, it is not allowed to measure the pass and touch the rolls and various rotating parts at the entrance side of the rolling mill. If it is necessary to adjust the inlet guide rail, the rolling mill must be stopped before operation.

3. When the roller needs grinding, special tools must be used to stop the rolling operation. Stand at the mill pass exit to grind the hole, with one person grinding the hole and one person supervising.

4. In the rolling process of each unit of the continuous rolling mill, when there is steel sticking, steel running and changing the import and export guide, the main console must be notified to stop, and the processing operation can only be carried out after the stop.

5. During normal production, steel rolling workers are not allowed to work with their backs to the rolling line to prevent breakout and personal injury accidents during rolling. When a steel leakage accident occurs during rolling, the steel rolling worker should immediately rush to the scene to deal with it, so as to prevent the leaked red steel from hitting various pipelines and causing accidents or fires.

6. In the rolling process of the rolling mill, it is forbidden to stand at the exit of the rolling mill and cross the rolling line to prevent accidents.

7. When adjusting the rolling mill, the adjustment of the flat rolling mill should stop, and the vertical rolling mill should stop.

8. When lifting rollers, semi-finished products, steel heads, etc., cooperate with the crane operator to command the crane to make accurate gestures, and be careful not to collide with the rolling mill and the main console.

9. During normal production or handling of cooling bed failures, it is strictly forbidden for mill adjusters to measure steel in large cooling beds.

10. When flying shear is in normal operation, it should be supervised by special personnel, and no one is allowed to get close to it.

1 1. When cleaning the flying shear iron head, the rolling mill must stop rolling, and at the same time, it should be supervised by special personnel. When lifting the steel head, no one is allowed to stand in the pit of the steel head to prevent the steel head from falling and hurting people.

12. If the flying shear fails, immediately cut off the power and notify relevant personnel to handle it.

13. In the production operation, the rolling mill operator must dress neatly and fasten the buttons. It is forbidden to go shirtless in summer and wear cotton coats in winter.

14. Rolling mill operators are strictly forbidden to rest or chat on the operating platform. They did enter the console because of work needs, and returned immediately after processing.

15. Before the shift change, the semi-finished products and hot waste products of this shift must be cleaned up, and the work site should be kept clean and tidy.