Summary of safety hazard investigation

With the development of economy and society, production safety has increasingly become the theme of social development. Only by shifting the focus of safety management to establishing an accident prevention system can we effectively prevent and reduce accidents and achieve safe production. The following is a summary of the investigation of safety hazards that I compiled for you. If you like it, you can share it with your friends!

Summary of the investigation of safety hazards 1

Safety work is our school’s responsibility The top priority of routine work is to further implement the policy of safety first and prevention first, prevent the occurrence of safety accidents, and make every effort to create a safe campus and ensure a good environment for students to grow up healthily. The school will discuss the current situation of safety and security work. , convened school committee meetings, class teacher meetings, and all teacher meetings to deploy safety and security tasks at all levels, strengthen security measures, and conscientiously carry out self-examination and rectification according to job responsibilities and requirements. The self-inspection and rectification situation of our school is now reported as follows:

1. School safety work responsibilities are implemented in place. We have established and improved the leading organization for safety and security work, improved safety work rules and regulations, and implemented a safety work responsibility system. Television surveillance systems have been installed at school entrances and exits, main roads within the school, and main student activity areas on campus, among other places where people gather. Important parts of the school and management blind spots are included in the scope of 24-hour real-time monitoring, building a three-dimensional prevention network for school safety management.

2. Security team construction. The school has selected teachers with strong sense of responsibility and high professional quality to establish a school safety and security work organization. The security staff have strengthened inspections of the campus to ensure that the daily safety and security work of the campus is implemented. Strict school guard system. While students are in school, the campus is under closed management. Outsiders who enter the campus are strictly checked and registration procedures are carefully performed. Outsiders are strictly prohibited from entering the campus at will without the approval of the school. Parents of non-students are strictly prohibited from taking students out of the school.

3. The status of leadership on duty. In accordance with the requirements of superiors, our school has further strengthened the work of caring for students on and off school. The school organizes all teachers, led by middle-level leaders and above, to carry out escort work at the school gate every day when going to school and after school, ensuring the safety of students entering and exiting the school.

4. Safety education situation. The school regularly educates students on safety knowledge, adheres to the "prevention first" policy, puts safety work first, and uses speeches under the national flag, theme class and team meetings, campus radio, blackboard newspapers, etc. to regularly carry out safety work education and Training to improve the safety awareness of teachers and students and the basic skills of self-rescue in distress. Students have mastered some necessary self-protection and self-rescue knowledge. In addition to daily safety education, schools must provide concentrated safety education to students before holidays and after school starts. Schools and teachers actively use school communications to communicate with parents, building a bridge between home and school safety education.

5. Strengthen safety file management. The establishment, improvement and management of safety files are an important part of safety management work. The school establishes safety work plans, deployment files, fire protection files, key location files, flammable and explosive dangerous goods files according to actual conditions, and improves various safety work plans.

Through this investigation, we are more clearly aware of the importance of creating a safe campus. The task is arduous. Only with the efforts and cooperation of all parties can we ensure safety.

Summary of safety hazard investigation 2

Safety work in campus and surrounding environment is the prerequisite and guarantee for improving the quality of school education and teaching, and is related to the stability and development of society. In order to further purify the educational environment, ensure student safety, and maintain campus and social stability, in accordance with the instructions of the County Education Bureau, our township conducted a safety hazard investigation on the campuses and surrounding environments of primary and secondary schools and kindergartens in the township. The results are now reported as follows :

1. Strengthen leadership and attach great importance to safety work

The central school formulated a work plan for the investigation of safety hazards and promptly established a leading group for the investigation of safety hazards on campus and surrounding areas.

According to the requirements for potential hazard investigation, relevant personnel have clarified their work goals, implemented their investigation responsibilities, immediately carried out comprehensive inspections of potential safety hazards on campus and surrounding areas, and carefully kept records of relevant inspections.

2. Focused on investigating whether there are hidden dangers in various buildings and facilities on campus

By inspecting primary and secondary school classrooms, student dormitories, teacher dormitories, gates, walls, and student canteens throughout the township , toilets, wells, pools, walkway guardrails, flagpoles, indoor chandelier hangings, outdoor decorations (ceramic tiles, tiles, rafters, etc.) and electric poles, wires, lighting lines and other facilities will be carefully and carefully inspected, and some existing safety issues will be carefully checked. A summary report of hidden dangers is as follows:

1. The transformer on the junior high school campus has been used for more than 15 years. The equipment is old and malfunctions frequently. Leakage and tripping occur from time to time. It needs to be replaced urgently. The railings of the main teaching building are 96cm and low. It is 14cm higher than the national standard and needs to be heightened and reinforced; the quality of the window sash in the new dormitory building is very poor, and the entire window often falls off; the hygiene of the student kitchen needs to be improved; there is no monitoring facility on campus.

2. The fence behind the teaching building of Zhenligu Primary School is weathered, and a low-voltage pole on the campus has cracks, posing a great threat to the safety of teachers and students;

3. Wang Factory The roof tiles of the primary school classrooms for Class 1 (1), Class 1 (2), Grade 2, Grade 3, and Grade 6 have fallen off in large areas and the purlins have deformed, posing safety risks.

4. The tiles on the doorpost of Dingmazhuang Primary School fell off, and the 16 classrooms are D-level dangerous buildings, posing safety risks.

5. Zhang Sanlou Primary School has 9 Class D dangerous buildings, one Class C dangerous toilet, and the south wall of the campus is tilted outward.

6. There is a large pit on the north side of the playground of Jinzhuang Primary School. The bricks on the top pillars of the corridor of the teaching building are weathered and may collapse at any time.

7. The south wall of Dinglou Primary School is tilted inward, and there are 5 classrooms in D-level dangerous buildings.

8. The southeast corner and northwest corner of the fence of Zhangshuanglou Primary School are tilted inward. , there are 3 dangerous rooms.

9. There are more than 100 meters of walls on both sides of the gate of Zhenglou Primary School that are in danger of collapsing at any time, and the classroom tiles have fallen off in large areas.

10. The wall of the front classroom of the Central Primary School fell off and the roof sank, making it impossible to attend normal classes on rainy days;

11. The construction of the teaching building of Liutun Primary School posed safety hazards to students.

Except for the junior high school and the central primary school, the wiring in the other 13 primary schools has varying degrees of weathering, with rubber cracks and exposed wires, posing great safety risks.

3. Conducted an investigation around primary and secondary schools in the township

There are no construction projects under construction around each school, and there are no corporate sites that produce, operate or store toxic, harmful and dangerous chemicals. ; Conduct a comprehensive inspection of the school's surrounding environment and traffic safety, as well as the public safety environment of the school and surrounding areas. The following safety hazards were found:

1. A female mental patient often wanders near the junior high school;

2. Liuzhuang Primary School is adjacent to National Highway 310 in the south, and there is a natural village of students Going to and from school has to pass through the national highway, and the traffic volume is large, and the traffic safety situation is not optimistic;

3. The traffic volume at the entrance of Liutun Primary School and Zaoziying Primary School is large, and there are no warning signs, which poses potential traffic safety risks.

4. There are mobile stalls at the entrance of every primary school, selling food without hygiene guarantee, which poses serious safety risks.

4. In order to eliminate safety hazards and ensure the safety and stability of the school and surrounding environment. The central school has taken practical and feasible rectification measures in response to the safety hazards discovered above.

1. In response to the tilting of the fence, the central school has placed warning signs at dangerous locations and reported the situation to the county bureau in a timely manner to strive for school building maintenance and reinforcement projects.

2. Continue to adhere to the system of escorting students after school. Students from Liuzhuang, Liutun and Zaoziying primary schools lined up after school and were escorted to a safe section by 2-3 teachers.

3. The school must lock the door during classes, and leaders and teachers on duty must strengthen inspections and register first before entering for all persons entering the campus. The on-duty leaders and teachers of junior high schools have strengthened the intensity and intensity of night inspections to ensure safety.

4. Actively contact the township industrial and commercial department to rectify mobile vendors, and educate students not to eat unclean food through broadcasts, theme class meetings, publicity boards, etc.; at the same time, strengthen guard management and strictly prohibit students from eating unclean food Going out privately.

5. The central school leadership team implements safety inspections. Members of the leadership team must regularly inspect the safety status of the schools they are responsible for and provide timely rectification suggestions for potential safety hazards that arise.

6. Regularly use student assemblies and class meetings to conduct various aspects of campus safety education for students, so that safety education can be "remitting unremittingly and the alarm bells are always ringing."

Summary of Safety Hazard Investigation 3

Since the start of construction, our project department has conscientiously implemented the spirit of the safety meetings of the project team, the director’s office, the company and the project department in terms of safety governance, and adhered to Carry out the activity of "Safety is above all else, responsibility is more important than Mount Tai, and safety is an eternal theme for construction enterprises". Never relax and be careless at all times, in order to realize the safety production management of "three noes, three eliminations, and one creation" proposed by the project department. Target, strengthen the safety management work at the construction site, insist on face-to-face training, improve the quality of all employees, pay close attention to implementation, basically achieve safe production, prevent the occurrence of major malignant accidents, and maintain a good momentum of stable and healthy development of safety production work. The following is a brief summary of safety work.

1. Basic safety situation

1. Safety performance: Although there have been several collapse and roofing accidents in the tunnels under the jurisdiction of our project department, accidents involving serious injuries or more have been eliminated, and gas, dust, etc. The rate of serious accidents and serious injuries is zero, and safe production has been basically achieved.

2. Safety inspection: In 20--year since the start of construction, the project department has organized 12 monthly inspections and 24 hidden dangers. There are still potential safety problems: A: The geological conditions of the construction tunnel face are poor, the groundwater is rich, and the construction is difficult; B: The initial support deformation of the tunnel is large, that is, the problems of peripheral convergence and large vault settlement; C: The main tunnel tunnel has poor geological conditions and is difficult to enter.

3. Safety management: In view of the safety risks that still exist, the project department made the following adjustments to the construction plan according to the meeting requirements of the project team, the general manager’s office and the company:

A : During tunnel construction, the policy of “short footage, advanced pipes, and early sealing” was implemented, the grouting effect of advanced small conduits was strengthened, the groundwater drainage at the tunnel face was done well, and construction was carried out in strict accordance with the design drawings and construction specifications, and Adopt strengthened support measures in appropriate areas;

B: In view of the current problem of large deformation of initial tunnel support, the project department requires surveyors to closely monitor the deformation and measure at least once a day. After consultation with the owner, Temporary inverted arches are added to achieve early closure and ring formation, thereby achieving the purpose of reducing the amount of deformation. At the same time, it is required that the secondary lining of the tunnel must closely follow the excavation face to achieve the purpose of safe construction;

C: In view of the current poor geological conditions of the main tunnel and the difficulty of entering the tunnel, the project department followed In accordance with the requirements of the design change drawings, the large pipe shed was re-constructed to enhance the grouting effect. At the same time, the dewatering work at the well points outside the tunnel and the drainage work at the tunnel face were strengthened. After the construction of the large pipe shed was completed, the construction of the main tunnel tunnel was carried out in strict accordance with the CRD construction method. , to ensure the smooth construction of the tunnel.

2. Main practices of safety work

As far as safety work is concerned, there are three characteristics: first, good safety performance is maintained; second, the quality of on-site construction is significantly improved, The safety and quality awareness of all employees has been significantly improved; third, with the orderly progress of tunnel construction, the company's comprehensive competitiveness has been greatly improved. This is both a characteristic of safety work and a goal set this year. To this end, the project department carefully analyzed and summarized the gains and losses in 20--year, and guided by the spirit of safety meetings at all levels, conducted in-depth research and established the safety work ideas for 20--year. The basic safety work practices are reflected in the "two "Grasp", that is: grasp the basics and key points. The specific methods are as follows:

1. Grasp the basics: Develop a management system that is consistent with the actual situation of the project, and establish and improve a high-frequency, all-round safety management supervision and inspection system.

At the beginning of 20---, our project department took the implementation of the spirit of safety meetings at all levels as a top priority, organized personnel from various departments of the project department and construction team safety management personnel to study and discuss, and researched and formulated specific policies based on the actual situation of our project department. operating details, and establish and improve a high-frequency, all-round safety management supervision and inspection system. Focused on the following aspects of work:

A: The project department has established a comprehensive monthly assessment system for the safety and quality of the construction team. 10% of the construction team's monthly total salary is regarded as the safety and quality content salary. At the beginning of each month The safety department of the project department will take the lead and organize relevant departments to conduct public assessments of the construction team's monthly safety management and project quality, and strictly implement them.

B: While requiring safety personnel to monitor the entire safety and quality process 24 hours a day, the project department has formed a mutual supervision system for quality acceptance and an on-site safety management system, firmly grasping on-site safety and quality. Quality of job operations.

C: In terms of safety supervision and inspection, continue to adhere to the acceptance system, insist on resolute rectification of safety and quality problems existing on site, and carry out rework when necessary;

D: Carry out the project The Ministry conducted "face-to-face" training activities for construction team employees to comprehensively improve employees' safety and quality awareness, and achieved good results.

2. Focus on key points: actively organize, strictly control, and keep an eye on key safety tasks

A: Completed the preparation of emergency plans, and summarized the safety experience of tunnel construction in our project department and lessons learned, combined with the current objective actual situation, and actively organized the relevant personnel of the safety, technology, and quality departments of our project department to conduct three revisions, forming a safety management system suitable for the actual situation of our project department;

B: According to the construction characteristics of the site in different periods, the focus of safety work should be adjusted in a timely manner to ensure that the monitoring is in place and safety supervision is effective.

Looking back and summarizing, the most important thing about this year’s safety production work is the stable development of the safety production situation, but the gap in safety work cannot be ignored. In short, while we see the achievements, we must not ignore the existence of existing problems. We must carefully analyze and summarize, find breakthroughs, identify entry points, and ensure the smooth progress of tunnel safety production work.

3. Safety work plan for 20--

Basic idea: Based on the work summary and analysis in 20--, the preliminary plan for safety work in 20-- is: We must adhere to three principles to achieve stability, improvement and improvement.

A: Three persistences:

Adhere to the current safety performance assessment system, further refine the standards, and find breakthroughs in assessment;

Adhere to key safety projects Responsibility system, and further work on the supervision of the responsibility fulfillment process;

Adhere to the employee face-to-face training system, further refine the implementation details, and improve employees' safety and quality awareness.

B: Once stable, one rises, one improves

One stabilization means the safety production situation is stable;

One improvement means the quality of tunnel construction improves;

Once improved, the quality of employees will steadily improve.

Summary of potential safety hazard investigation 4

The second phase of the Horace Star City commercial residential project is located in the town of -- City. The project is constructed by our company and is a five-story frame-concrete structure. , the three buildings have a total building area of ??22,000m2. This project officially entered the construction site on October 10, 2020. Since entering the site, the pile foundation project of Building No. 2 and the foundation and foundation sub-projects have been completed.

According to the spirit of Jianzhi Anfa [20--] No. 1 document "Notice on Carrying out Pre-holiday Construction Project Quality and Safety Hazard Investigation Work", our project department, on the occasion of the Spring Festival, is focusing on low temperature In response to various disasters that may be caused by rain and snow, we have carefully carried out special operations to investigate and control hidden dangers, strengthen safety precautions, resolutely curb the occurrence of safety accidents, and reduce and eliminate the occurrence of general accidents.

1. Guiding ideology

Resolutely implement the policy of “safety first, prevention first, comprehensive management”, adhere to the people-oriented safety concept, and implement the project department and its affiliated departments and departments. The safety responsible person of the construction team has the responsibility for hidden danger investigation and management, and effectively implements the work of hidden danger investigation and management. Through this quality and safety hazard investigation action, we will conduct an in-depth investigation and treatment of quality and safety hazards during the construction process, standardize the construction safety prevention system, and prevent projects Quality and safety accidents occur.

2. Organizational Leadership

The project department has established a leading group for the investigation of project quality and safety hazards:

Team leader: ---

Deputy Team leader: ---, Liu--

Team members: Li--, Li--, Fu--, Chen--, Liu-, Tang-, Liu--

3. Arrangement for safety hazard investigation work

The safety investigation work is generally divided into three steps:

1. Convene a mobilization meeting for potential safety hazard investigation to publicize the importance and urgency of safety work and call for All construction workers start with action and look for potential safety hazards around them.

2. Find safety hazards, focusing on the following aspects:

⑴ Further improve the safety production rules and regulations of the project department and its affiliated departments and work areas, and based on the actual conditions of the construction site, Organize the formulation of safety operating procedures and supervise their implementation.

⑵ The project department organizes inspections of mechanical equipment, especially special equipment, to ensure that the mechanical equipment does not operate "sickly". Organize special safety inspections on on-site construction electricity use. .

⑶ Continue to organize and carry out three-level safety education and special operations training to ensure that all special operations personnel are certified to work and ensure that all employees of the project department and outsourcing team can participate in safety training.

⑷ Carry out special and professional inspections according to the construction progress, promptly identify dangerous points (sources) on the construction site and supervise the implementation of rectifications. Focus on investigating the enclosure and zoning of construction areas and material access and storage areas.

⑸ Focus on the correct wearing and use of safety helmets, safety belts and safety ropes at construction sites.

⑹ Further strengthen the installation of construction site signs and safety warning signs.

3. Carry out rectifications on potential safety hazards item by item to achieve the purpose of prevention.

4. Hidden hazard investigation

1. The materials on site are piled in a messy manner, with varying degrees of scattered materials piled up.

2. There are few safety warning signs at the construction site, especially in the enclosure and zoning of the construction area and material entry area. The safety warning signs are not obvious.

3. The temporary power settings at the construction site are not standardized, and the cables are not overhead or buried.

4. Construction workers do not have strong safety awareness, and some workers do not wear safety helmets as required.

5. The foundation part of the first-layer formwork is not compacted and hardened, and the pole distance exceeds the allowable range.

5. Hidden Hazard Management

1. Organize on-site construction personnel to clean up on-site materials during the shutdown period and place material identification signs.

2. Adjust the construction site fencing, rationally divide the area, and hang safety warning slogans.

3. The person in charge of safety conducts temporary electricity safety education and briefing on electricity safety to electricians, and urges them to bury exposed cables underground.

4. Provide safety education to all construction workers, improve safety awareness, and make it mandatory for all construction workers to wear safety helmets. Construction workers and safety officers will conduct inspections and supervision. If a case is found, a fine of 50 yuan per person will be imposed.

5. Harden the foundation part of the formwork, and tighten the rod distance according to the specifications.

All the staff of the project department attach great importance to safety production work, and do a good job in the investigation and management of hidden safety hazards, so that the safety inspection is not a formality or a formality, and resolutely realize that the safety inspection has "no blind spots and no dead ends" The three-no management goal of "no leakage points" promptly eliminated potential accidents in the bud, effectively ensuring a good safety production situation for the entire project department.

Summary of safety hazard investigation 5

In accordance with the requirements of the Education Bureau for school safety work, our school held a special meeting on safety work in a timely manner and implemented the guidance spirit of the Education Bureau's documents. The central school immediately formed a safety inspection leading group to conduct a major safety inspection on each school's hardware facilities (school buildings, walls, equipment, wires, etc.) on June 23. Based on the actual situation of the school, teachers and teachers, teachers and students, teachers and Parents, teachers, schools, schools and society investigated unstable factors, and each school reported to the central primary school on June 24. The specific summary is as follows:

1. Hidden dangers that do not exist or have been solved:

1. There are no unstable factors in the interpersonal relationships of all schools in the school district;

2. All the potential safety hazards found in each school that can be eliminated have been resolved (such as aging wires, incomplete fire-fighting equipment, damaged sports equipment, etc.);

3. During special weather, students Specific arrangements have also been made for the need to escort and pick up and drop off after school;

4. The collapsed walls and toilets have been repaired (as toilets in primary schools);

5. Center School students have to walk 5 miles to and from school, which can easily cause traffic accidents. In response to this work, the school provides students with targeted ideological education so that they can be both civilized and safe people.

2. Hidden dangers that the school is unable to solve:

1. There are wires passing over the central school dam, and there is a danger of wires falling (reported to the power company) .

2. There are no protective fences in the teachers’ dormitory of the Central School, and neither public nor private property is protected.

3. The central school teaching building leaks on rainy days, causing inconvenience to education and teaching.

4. --The primary school campus has no walls and the toilets are in dilapidated condition, which brings inconvenience to the school management, teachers and students.

--Primary school cooperation--There are no safety risks in primary schools.

Related articles on summary of safety hazard investigation:

★ 5 selected articles on safety hazard investigation summary

★ Selected examples of safety hazard investigation summary

★ Excellent sample essay on safety hazard investigation summary

★ Fire safety hazard investigation summary

★ 3 safety hazard report sample essays

★ Safety hazard investigation summary Report reference example

★ Latest summary of safety hazard investigation and summary

★ Safety production hazard investigation summary

★ Fire safety hazard investigation and remediation work summary example

★ Reference example of safety hazard investigation summary report (2)