What are the safety measures for decoration construction?

1. Define the safety measures in the construction organization design, and make safety disclosure for each type of work.

2. Precautions for safety (fire prevention) discipline:

(1) Safety production rules and regulations must be observed when entering the construction site.

(2) No drinking before operation. Smoking is not allowed in the restricted area.

(3) Barefoot, slippers and bell bottoms are not allowed in site operation.

(4) It is forbidden to wear leather shoes and iron skates when working high above the ground.

(5) Non-operating personnel are not allowed to enter the workplace.

(6) Without the approval of the person in charge of construction, the erection facilities and safety devices shall not be dismantled at will.

(7) It is forbidden to connect wires indiscriminately, and electricity must be connected according to the specifications.

(8) Don't make trouble in the construction site, observe public security discipline and take good care of public property.

(9) It is forbidden to throw down any materials from a height, and children are not allowed to enter the construction site.

(1) Anyone who violates the above discipline will be punished according to regulations.

3. Post safety slogans

\ \ \ "Safety production, civilized production, everyone's responsibility \ \ \", \ \ \ "Safety first \ \ \ \" and so on.

4. Overview of the project

The construction unit, the name of the project, the person in charge of the project, the person in charge of safety (fire prevention), the decoration area, the quality requirements and the date of commencement and completion.

5. Establish a safety inspection education system on the construction site

(1) Before entering the site, employees must be educated on safety legal system, enhance the concept of safety legal system, and firmly establish the idea of \ \ \ \ "Safety first \ \ \ \".

(2) Educate employees to seriously study and master the safety operation procedures of this type of work and relevant knowledge of safety inspection, improve safety technology, consciously abide by various systems of safety production, and do not take risks in violation of regulations.

(3) Conduct on-site safety education for newly transferred workers, stick to their posts and strictly implement safety regulations and systems.

(4) Overcome the erroneous paralysis of emphasizing the early stage and neglecting the final project, and attach importance to safety production in all directions and in the whole process.

(5) Do a good job in safety education for employees in spare time.

(6) Make a safety production summary once a week, and make a safety production summary at the end of the project.

6. Establish technical measures and management measures for on-site safe use of electricity

(1) Temporary lines shall be erected on the construction site, which shall be carried overhead by special personnel and meet safety requirements.

(2) The branch line leading from the low-voltage trunk line to the electrical equipment must use insulated wires (it is forbidden to use unqualified wires with old insulation, and rubber-sheathed flexible wires with zero cores should be used as the power cord).

(3) The wiring of electrical equipment should be correct.

(4) All electrical equipment used should have overload and short-circuit protection measures and be equipped with protective covers.

(5) Important (or dangerous) parts of the site should have eye-catching electrical safety signs.

7. Establish an electrical safety duty system and hang a duty day card.

(1) The lighting circuit at the site must use soft rubber wire and sheath line, and be protected by leakage protector.

(2) Professional jobs must hold relevant certificates.

(3) The hot work report must be filled in before the electric welding operation, and the construction can only be started after the inspection and approval.

8. Establish safety protection measures for motor construction machinery and hand-held power tools.

(1) Always check the shell, handle, switch and power cord of hand-held electric tools used in the construction site.

(2) Always check the tools and mechanical equipment used, and do a good job in the maintenance of machines and tools.

(3) It is forbidden to wear gloves and use electric tools.

(4) Use mechanized electric tools in a civilized manner and strictly abide by the safety operation procedures.

9. Requirements for stacking materials on the construction site

(1) The warehouse keeper is responsible for the materials on the construction site, and the materials and components used should be stacked according to varieties and specifications, and be safe and stable.

(2) Oils, paints and other harmful substances should be placed in a well-ventilated house, and surplus materials and empty barrels should be taken out of the warehouse every day for unified storage and treatment.

(3) There is a warehouse with inflammable and explosive materials and fire-fighting equipment.

(4) It is forbidden to pile up materials and sundries that hinder the appearance of the city on the street construction site.