Supervision requirements for safety and quality meeting of construction team leader?

1. Adhere to safety first, and the alarm bell for production safety will ring, so as to ensure construction safety without accidents. Safety in production is a top priority related to the safety of people's lives and property, and directly related to the benefits of enterprises. The project department and the construction team leader are required to take safety production as the top priority, firmly establish the idea of safety first, and ensure construction safety without accidents. Specifically, the following safety work should be done well: 1, and the project department should be clear. 2, the project department to establish safety ledger, safety diary. 3, the project department should do a good job of personnel (workers) signature (such as name, ID number, home address, contact information, etc.). ) .4. For dike slope protection: 1) It is forbidden for workers to drink alcohol to go to work. 2) Safety helmet must be worn at work (those who don't wear safety helmet will be fined 50 yuan). 3) Excavator drivers must hold relevant certificates, strengthen the maintenance and overhaul of excavators, and prevent others from being hurt during construction. 4) When carpentry matches boards, it is necessary to do a good job in the safety of using electricity and saws. When erecting formwork, do a good job of piling hammer, and don't hurt others. When transporting the formwork, it is necessary to prevent sundries, tripping and nails from hurting people. 5) When loading and unloading concrete blocks for slope protection, there must be personnel present to command and check the firmness of the lifting rope to prevent concrete blocks from falling and hurting people due to broken rope. 5. In terms of pump station construction: 1) The project department should have a special person in charge, so that as long as the construction is carried out, someone will be responsible at the site to monitor safety production. 2) It is forbidden for workers to drink at work. 3) Workers must wear safety helmets at work (50 yuan will be fined for not wearing safety helmets at work). 4) Before construction, the construction organization design scheme of pumping station must be prepared and submitted to the supervisor for approval. 5) In the process of earthwork excavation, the construction team leader and relevant technicians must check on the spot to prevent earthwork collapse and personal injury accidents. 6) Do a good job in electricity safety. Cable placement and cable connectors must meet the requirements of the specification. There must be a distribution box (with a lock on the door), and the switches in the distribution box must meet the requirements. Leakage protector must be installed, and power can only be sent after installation and inspection. 7) Do a good job of well point dewatering safety: ① Do a good job of loading and unloading materials and equipment (including generators). (2) The generator shall be managed, maintained and maintained by special personnel, and there shall be guardrails and safety warning signs around the generator. 8) Do a good job in the safety of material handling. In the process of loading and unloading, someone must be on the scene to command and monitor to prevent accidents. 9) Do a good job in the safety of climbing. Scaffolding should be firm. After the erection is completed, full-time or part-time safety personnel must check. You can't climb up until you are qualified. When necessary, they should wear safety belts to ensure the safety of climbing operations. 10) do a good job in formwork support and formwork removal: ① do a good job in formwork processing and production to prevent safety accidents when using electricity and sawing materials. (2) Do a good job of safety during unloading and installation. (3) Do a good job in safety during form removal, prevent formwork and scaffold from falling and hurting people, and prevent scaffold from falling and hurting people due to unstable release. 6. In the construction of temporary access roads for transporting construction waste: 1) Drivers must strictly abide by the traffic rules and do not drink and drive. 2) Transport vehicles are not allowed to overtake to ensure the safety of the steel temporary bridge. 3) The construction site shall be commanded by a special person to prevent the vehicle from being skewed, hurting people and accidents due to poor road surface. 4) Excavator drivers must hold relevant certificates. 7. Pay special attention to the safety of dormitory and canteen: 1) Pay special attention to the safety of electricity use in dormitory and canteen. Leakage protection devices must be installed for electricity consumption in dormitories and canteens. At the same time, it is forbidden for workers to pull and ride indiscriminately, and full-time electricians in the project department are required to check regularly and correct problems in time when found. 2) Pay special attention to the gas safety in the canteen to prevent gas leakage from hurting people. 3) Check, repair and reinforce the color steel tile houses in the dormitory, because most of them are old houses, so as to prevent people from being hurt by wind and rain. 4) The canteen should be cleaned to prevent food poisoning. 5) Do a good job in environmental sanitation. Dormitories and toilets should be cleaned, and garbage should be dug and piled up. 6) Do a good job of fire prevention in employees' living quarters (strengthen fire prevention education for smokers to prevent fire sources). Second, it is strictly required to pay special attention to the engineering quality of 1 and the inspection of raw materials (such as geotextile for slope protection, concrete blocks, steel bars, raw materials for pumping stations, etc.). ), and do a good job in the inspection of dike engineering density (stratified ring knife sampling inspection, whether the quantity meets the requirements). 2, to strictly process acceptance system, completes the inspection before construction. 3. Embankment filling: 1) Compacting the completed embankment (especially the old rock section). 2) Do a good job in the filling quality of embankments under construction: ① From Songshan section to drainage pumping station, soil should be selected, and it is forbidden to fill with soil with more reeds. (2) Do a good job in the compaction quality of Chen Xinliang's dike (there is almost no compaction at present). ③ Pay special attention to the quality of earthwork backfilling from CS0 to the embankment at the top of the drainage pump station, dig out the construction waste and heighten and thicken it. 4. In terms of dike slope protection: 1) Special attention should be paid to formwork support at bottom, top and inclined ridge to ensure the pouring quality, good vibration and good alignment. 2) Pay special attention to the compaction quality of the slope, and formulate compaction measures (because there is no natural settlement process for the newly-built embankment). 3) Pay special attention to the laying quality of geotextile and gravel cushion: ① Geotextile should be sent for inspection. (2) The thickness of gravel cushion should reach 8cm. 4) Pay special attention to the laying quality of concrete blocks to make them smooth and have obvious concave-convex or wave phenomenon. 5) Do a good job in the connection quality of concrete blocks with top, bottom and inclined ridges. 5. In terms of pump station construction: 1) Special attention must be paid to the quality of foundation pit excavation, and overbreak is strictly prohibited. If the soil structure is destroyed, we must leave enough protective layer for manual excavation. 2) Pay special attention to the quality of formwork support. The formwork should be well supported. Bending formwork and support are strictly prohibited. Brush oil before pouring. Template splicing should be closely jointed, leaving no gaps to prevent slurry leakage; Template fixed firmly, put an end to die. 3) Pay special attention to the binding quality of steel bars. The lap joint of steel bars should meet the specification requirements, and the specifications and spacing of steel bars should meet the design requirements. Before pouring, it must be checked and accepted, and then pouring can be carried out (the technicians of the project department should check whether the steel bar lofting sheet is in conformity with the drawings). 4) Pay special attention to the quality of embedded parts: ① The materials and specifications are consistent with the drawings. (2) Geometric dimensions shall be consistent with drawings and equipment. 5) Pay special attention to the connection quality between the column structure of the management room and the foundation of the pumping station, and it is forbidden to insert steel bars in the column. 6) Pay special attention to the pouring quality of concrete: ① The strength label of concrete is consistent with the design. (2) Pay special attention to the vibrating quality when pouring, let people with special experience vibrate to prevent bubbles and hemp honeycomb, and strive to achieve excellent projects.

For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd