A summary of 7 fire safety self-inspection report samples

Column selection: "Fire Safety Self-Inspection Report", welcome to read.

Generally speaking, only practice can overcome the errors of experience. When our tasks are completed, we often need to write a report. Writing reports frequently can enhance our language expression skills. What reports are worth learning from? I specially compiled a sample fire safety self-inspection report from the Internet for reference only. Let’s take a look! Fire safety self-inspection report sample (Part 1)

In accordance with the spirit of Chongqing Fire Safety Committee No. xx2 and Chongqing Medical Management Office [xx] No. 40, in order to deeply learn the lessons from recent major fire accidents, and In accordance with the requirements of the ** City XX Government Fire Safety Committee's decision to carry out a city-wide fire safety inspection and rectification activity plan, in order to ensure that our hospital's activities are effective, we will further strengthen the main responsibility of our unit's fire safety and rectify fire protection violations and fire hazards. ** Town Health Center timely organized and carried out self-examination and self-correction of fire safety, conducted strict inspections according to the requirements, left no dead ends, no future troubles, and solved the existing problems. The self-examination and self-correction situation is now reported as follows.

1. The leaders of our hospital led the members of the fire safety leading group to conduct self-examination of the hospital’s fire hazard areas and key safety requirements

1. Inspection of power supply and water supply facilities, radiology department facilities and equipment Department equipment is safe,

2. The drug warehouse is independently set up without illegal construction;

3. High-pressure sterilizers and other facilities and equipment are safe;

4. Oxygen use in the hospital A dedicated person is in charge, and there is a dedicated storage room for oxygen bottles;

5. Outpatient, inpatient and other personnel gather in the fire exit of the department for inspection, and no extra beds occupy the fire exit;

6. Fire protection facilities The equipment is in good condition and the fire evacuation channels are clear;

7. The kitchen is well ventilated, a special fire extinguishing system is configured according to regulations, the flue and hood are cleaned regularly, and liquefied petroleum gas is not used illegally.

2. The hospital safety leading group is well organized, with clear personnel and responsibilities, emergency vehicles are in good condition, outpatient and inpatient facilities are safe, fire prevention facilities are intact, and evacuation channels are clear. Promote fire protection knowledge to all employees in the hospital, improve employees' fire awareness, enhance fire first aid treatment capabilities, and play a positive role in eliminating fire safety hazards; publicize fire prevention knowledge to patients and their caregivers, and post no-smoking signs in outpatient and inpatient departments The department team leader and head nurse are responsible for organizing department staff to supervise and dissuade patients and caregivers who smoke in oxygen wards and corridors.

3. Combined with inspection activities, actively carry out fire drills throughout the hospital to improve fire safety awareness, carry out monthly quality inspections on production safety, conduct irregular spot checks, organize a meeting of department heads across the hospital, and conduct self-examinations The situation is summarized, and existing safety hazards are rectified, striving to provide the public with a harmonious and safe medical environment. Through self-examination, the awareness of production safety has been improved, responsibilities have been clarified, and the "five in place" (rectification measures in place, responsibilities in place, funds in place, time limits in place, and plans in place) have been ensured, and the administrative duty and leadership systems have been strictly implemented. Fire safety self-inspection report sample (Part 2)

According to the requirements of safety work, we have always attached great importance to safety work. We now report the inspection situation in the first half of the year as follows. The inspection includes seven items:

1. Fire protection publicity and training

Always put safety first at work and organize a safety education for employees. Hang warning signs in canteens, corridors, kitchens and other places where fire and electricity are used to remind people of the importance of safety. For new temporary workers and employees, the use of fire extinguishers and the process of fire alarm are explained. and demonstrated the use of fire extinguishers.

2. Fire-fighting facilities and equipment

Fire extinguishers will be inspected this time, and the rest will be managed by the property management.

3. Use of electrical appliances, etc.

During this inspection, the hygiene and operation of the operating room were carefully checked and the hygiene was in good condition. Commonly used equipment such as rice cookers should be used normally to ensure that no fire occurs due to operating errors.

IV. Power distribution, circuits and lines

Inspection content: Operation of distribution boxes, operating rooms, warehouse facilities and equipment, and simple lines. After inspection, the power distribution cabinet and facilities and equipment were operating normally, and there were no unauthorized wiring problems.

Establish relevant inspection systems to implement responsibilities and effectively eliminate safety hazards.

The fire escape in the canteen is smooth and there is no accumulation of debris. Clean once a week and maintain good sanitary conditions. Lighting and channel markings are in good condition and meet safety requirements.

5. Existing fire hazards

1. The wire lines on the wall of the canteen are damaged to a certain extent.

2. Some workers are relatively lucky and need to further strengthen their education in the future.

3. It was found that the electricity consumption was stable and changed.

4. The store found two stable cases and made changes.

Through this self-examination, some fire safety hazards in our department have been eliminated as much as possible, and an educational lesson has been given to employees from the perspective of ideology and awareness, improving their fire safety knowledge and skills. , laying a solid foundation for the safety system of the employee canteen. Fire safety self-inspection report sample (Part 3)

After receiving the fire safety inspection notice, our school immediately organized a major inspection. The principal personally led the school safety officer, general affairs director, plumbers and electricians and related The personnel conducted a comprehensive self-examination of the school's dedicated classrooms, classrooms, financial rooms, etc., tested and debugged the alarm devices, and conducted a comprehensive self-examination of the fire protection facilities. The self-inspection situation is now reported as follows:

1. Implemented safety responsibility system. The school has formulated a fire safety responsibility system and fire safety responsibilities for each position, clarified the safety responsibilities and safety responsible persons of each department, signed a "Fire Safety Responsibility Letter", and strictly followed the requirements of the responsibility system and responsibility letter.

2. The school’s fire safety passages are smooth; each floor is equipped with fire-fighting equipment according to standards and is within the validity period.

3. The school has formulated a fire-fighting emergency evacuation plan, and regularly organizes teachers and students to conduct fire-fighting exercises.

4. Fire-fighting facilities and fire-fighting equipment are configured in accordance with relevant national regulations. Fire-fighting facilities and fire-fighting equipment have been regularly inspected and maintained without damage or unavailability.

5. Fire evacuation passages and safety exits are smooth.

6. The school regularly conducts fire protection education and training for teachers and students, and organizes fire protection knowledge competitions.

7. The school has safety work meetings and safety inspections every month and keeps records.

Through self-examination and self-correction, the faculty and staff can further understand the major responsibilities they shoulder, enhance their awareness of danger, consciously and proactively implement safety work, and make every effort to maintain the safety and stability of the school.

According to the spirit of Wu Dabaozi’s “Notice on Carrying out Special Rectification Work on Fire Safety in Spring”, the college organized and carried out special rectification work on fire safety in spring across the entire hospital. On June xx, the spring fire safety special rectification leading group composed of college leaders and the student affairs office conducted a comprehensive fire safety inspection of the college.

1. Key points of the inspection

1. This time, we mainly inspect all aspects of the illegal use of high-power electrical appliances above 100w and unauthorized pulling of power cords. We also conduct comprehensive inspections on the illegal use of electric stoves and electric heating cups. , rice cookers, water boilers and students who pull power cords indiscriminately, give warnings and deal with them promptly.

2. For the normal use of fire hydrants, fire extinguishers and other fire-fighting equipment, perform daily maintenance and addition and replacement of fire-proof equipment.

3. Warn students who violate regulations such as smoking in the dormitory and using candles for lighting after lights out. The fire safety committee, logistics and security departments are on duty 24 hours a day (call at any time if there is any situation).

4. The staff on duty will check the students’ sleep rate at night every day and conduct civilized and hygienic inspections of the dormitory rooms to ensure that potential safety hazards can be eliminated in a timely manner and make this a daily routine task.

2. Problems discovered during the inspection

The results of this inspection are generally satisfactory. No major safety hazards were found, but some were also found. The dormitory did not comply with the requirements and still used high-power electrical appliances during the inspection. The safety responsible person of the problematic class was criticized, as follows:

1. The dormitories in Lakeside No. 1 that heat up quickly include: < /p>

Unit 1: 201 (Human Management), 305 (International Trade 2), 602 (Accounting)

Unit 2: 101 (Finance)

2. The dormitories that heat up quickly in Yingyuan No. 2 are:

406 (Finance)

3. The dormitories with safety risks in Meiwu are:

531 , 619, 634

4. Yingyi’s dormitories with potential safety hazards are:

218, 214, 325, 326, 401, 406, 408, 429, 430

5. Ying Er’s dormitories with safety risks are:

208, 219, 207 (Note: 207 is extremely uncooperative with students and has a bad attitude)

3. Measures< /p>

1. We reported the results of this inspection within the college and criticized the above dormitories. Serious critical education was carried out for relevant students.

2. We held a safety education conference for student cadres, printed and distributed fire safety related materials to the dormitories, and required each class to hold a class meeting with the theme of fire safety.

3. Strengthen the safety responsible person system, requiring safety responsible persons at all levels to attach great importance to it, persevere, and conduct regular safety inspections.

"Hidden dangers are better than open flames, and responsibilities are heavier than Mount Tai." Fire safety work is a constant and unremitting work. We will continue to work hard in line with the service tenet of "everything for students, for everything for students, for all students" to comprehensively win the victory of the special rectification work on fire safety. struggle. The power supply is below 1.5 meters. Fire safety self-examination report sample (Part 4)

University campus safety is more important than Mount Tai. In order to implement the spirit of Haijiaoan [20xx] No. 11 "Notice on Immediately Carrying out Winter Fire Safety Inspections", effectively strengthen campus safety work, and maintain normal teaching order, I held a special meeting on xx, xx, xx to discuss the fire safety inspection Safety work has been carefully and meticulously deployed, the division of labor has been clarified, and responsibilities have been implemented. The school and the X Education Department conducted a winter school fire safety self-inspection. The inspection report is now as follows:

1. Strengthen organizational leadership and improve the organizational structure

The X Education Department established a fire safety self-inspection The leadership group is headed by the assistant and includes the safety supervisor, union chairman, and principal as members. Each unit sets up a self-examination team with the principal as the team leader and the leaders of the Security Department (office), General Affairs Department, and Moral Education Department as members. The town education office carried out supervision and rectification based on self-examination and self-correction of each campus.

2. Clarify safety goals and implement fire protection responsibilities

The school safety self-inspection leading group, together with the person in charge of the equipment room, specialized classrooms and class teachers, conducts careful analysis and research to investigate fire hazards , determine the key objectives and key parts of the safety inspection, and once again clarify the fire safety responsibilities. Canteens, dormitories, and laboratories are key areas, and electricity, gas, and oil are the main areas. Key points will be highlighted based on the census.

3. Extensively publicize and enhance prevention awareness

The school attaches great importance to publicizing winter fire safety knowledge to teachers and students. Each unit organized teachers and students to watch 4 promotional videos on fire protection capacity building, and conduct fire protection knowledge learning, publicity and knowledge competitions based on the fire protection knowledge exercise sets provided by the town. All publicity tools such as blackboard newspapers, class meetings, radio, etc. are also used to publicize all knowledge of winter fire prevention to students, which significantly enhances the winter safety awareness of teachers and students in the town.

IV. Problems and countermeasures discovered through self-examination:

(1) The signs for the use of fire protection facilities in each school are incomplete or not clear enough, and the responsibilities are not clearly assigned to specific persons. Each unit must further refine its work and its responsibilities for the safe use of fire protection facilities must be clearer.

(2) Fire hydrant boxes are not designed in old buildings, such as Yuhong Tower of Jiaoxie Middle School. Ensure that there are fire hydrant boxes within 50 meters of Yuhong Building or add ground fire hydrants near the building.

(3) The wire diameter of the old building is small and high-power electrical appliances cannot be used, such as the staff dormitory building of Jiaoxie Primary School. Teachers immediately stop using high-power electrical appliances. Fire safety self-inspection report sample (Part 5)

According to the notice on the special fire safety rectification implementation plan issued by the Guandu District Housing and Urban-Rural Development Bureau of Kunming City, the warehouse held an emergency meeting to deploy fire safety self-correction and self-inspection Work. In order to conscientiously implement the spirit of the document and combined with the actual situation of our warehouse, our project department organized a self-examination of the fire safety of our warehouse. The self-inspection report is now as follows:

1. Fire safety management Work:

1. Established and improved the organizational structure.

Persons in charge of fire safety: Zhang Dequan, Chen Guangti Fire safety managers: Chen Kaijian, Zhao Guocheng

Persons in charge of fire safety team: Chen Li, Liu Jianping, Chen Huijian, Xu Farong, Hua Wen (f215.com)

Establish and improve the fire safety management responsibility system, and implement the fire safety management responsibility system at all levels in strict accordance with the principle of "who is in charge, who is responsible". The project manager is responsible for the fire safety of the warehouse, and the fire safety responsibility system is implemented step by step.

2. Our warehouse is constantly improving its fire protection infrastructure. The installation, use and wiring of electrical products are also constantly regulated, evacuation channels are kept clear, and emergency lights are installed. At the same time, our warehouse conducted a comprehensive inspection of the fire extinguishers on site, disposed of expired and scrapped fire extinguishers, and promptly replaced a batch of fire extinguishers that met national standards. The mobile houses are strictly implemented in accordance with the requirements of the "Technical Regulations for Temporary Warehouse Buildings" (JGJ/T188-20xx) and meet the requirements of the "Interim Regulations on the Management of Temporary Light Steel Structure Prefabricated Mobile Houses in Kunming Construction Warehouses".

3. Strengthen the power management of warehouses. Focus on checking whether there are combustible materials around electrical equipment, especially whether the electrical equipment and lamps in the dangerous goods warehouse meet explosion-proof requirements. In addition, management must be strengthened in the following key places: (1) Electrical welding and cutting places. Warehouses must establish an approval system for the use of open flames and electric and gas welding operations, and strictly implement the approval procedures for warehouse fire applications. Personnel performing electrical and gas welding operations can only work after holding an operating qualification certificate. The welding and cutting operation site should be equipped with sufficient fire-extinguishing equipment; containers containing flammable, combustible liquids, gases and chemical hazardous materials should be thoroughly removed before welding and cutting. (2) Places where electricity is used. Overload protection devices must be installed for temporary power use. Warehouse power lines and lighting lines must be set up separately, and fuses with corresponding power must be installed respectively. It is strictly prohibited to use open flames or high-heat and intense light source lamps in the warehouse. Temporary use of electricity should comply with fire prevention regulations. (3) Dormitory. Inflammable and explosive items are not allowed to be stored in the dormitory, and it is strictly prohibited to connect wires indiscriminately and use high-power electrical appliances such as iodine tungsten lamps and electric stoves; now 36v low-voltage lighting is used.

4. Strengthen fire management in warehouses. First of all, we must strictly implement the approval system for the use of open flames in hazardous sites. Oxygen and acetylene bottles cannot be mixed. During welding operations, a guardian must be assigned to equip with necessary fire-fighting equipment. Non-combustible material boards should be used to cover the welding points while cleaning them up. Clean the combustible materials around them to prevent weld beads from splashing around; secondly, send full-time safety officers to urge workers to clean up shavings, sawdust, paint scraps and other flammable and combustible materials generated in the warehouse in a timely manner, and temporarily store and unify them in a centralized location Disposal and burning are strictly prohibited. Fire prevention signs and fire prevention facilities must be installed at the temporary storage yard. Finally, eye-catching fire safety signs such as no smoking should be set up in workers’ dormitories, employee lounges, hazardous materials warehouses and other fire risk areas, and smoking rooms or designated safe smoking places should be set up.

5. Implement a strict fire safety management system, strengthen fire safety publicity, and provide fire safety training to workers. We must conscientiously study and implement the new "Fire Protection Law". First, we must clearly define the person in charge of fire safety, be fully responsible for the fire safety work in the warehouse, establish a voluntary fire safety organization, be responsible for daily fire prevention inspections and the handling of emergencies, and designate dedicated personnel at the same time. Responsible for safety inspections before and after shutdown, focusing on checking whether there are any hidden safety hazards such as leftover cigarette butts, electric fire sources, open flames, etc. to prevent problems before they occur.

2. Highlight the key points and strictly inspect

1. Facilities:

Focus on checking whether the fire-fighting facilities and equipment of our project are missing or damaged and whether the fire-fighting passages comply with regulations. problem.

2. Warehouse:

Check and improve the placement of fire extinguishers in the warehouse of our project, the storage of acetylene bottles and oxygen bottles, and whether the safe distances when using acetylene bottles, oxygen bottles and their use comply with the regulations. Require. 3. Regional aspects:

China Nonferrous Metal Industry No. 14 Metallurgical Construction Company

Mainly inspected the safety exits of our project’s warehouses, plate stacking areas, wood processing areas and other fire points. and issues such as evacuation passages, fire separation distances, fire truck passages, and fire water sources. It is strictly forbidden to connect wires indiscriminately in the mobile room, and it is prohibited to use electric heating appliances such as rice cookers, electric stoves, electric cups, and water turtles.

(1) Strict inspection to ensure that no blind spots are left in the fire inspection and the goals are clear. We focused on inspecting the implementation of fire safety responsibilities, the implementation of the fire prevention inspection system, the integrity of building fire protection facilities, safety exits, and safe evacuation facilities, fire power supply management, and employee fire protection training. Regarding asset finance, we focused on the fire protection management of inventory storage. Focus on checking the safety of fire and electricity in the duty room and staff dormitories. At the same time, the purchase and update of fire-fighting equipment, as well as the formulation and implementation of fire-fighting plans were inspected.

(2) Strengthen education and increase the publicity of fire safety work

Our warehouse is organizing and carrying out "fire drills" activities to strengthen the education of all migrant workers on site through themed activities. fire safety knowledge. During the activities, migrant workers should be informed about how to save themselves in the event of a fire, so that they are familiar with basic fire protection knowledge and can report fire alarms, use fire extinguishing equipment, and put out initial fires, so that every construction worker can All have basic knowledge of fire prevention and disposal.

3. Find problems and pay close attention to rectification

During the inspection process, the hidden dangers discovered and their rectifications are as follows:

1. When the welder is performing gas cutting construction operations, The safety distance between acetylene and oxygen bottles is not enough;

2. There are insufficient fire safety signs and placards in the warehouse;

3. Some fire extinguishers in the warehouse have failed (overcharged) and are insufficient in quantity; < /p>

4. The construction workers’ dormitories have wooden floors, which are flammable. Workers smoke in the dormitories, which poses a great fire hazard;

Rectification status:

1. Oxygen and acetylene bottles in the warehouse must be kept at a distance of more than 5 meters in accordance with the regulations, and a distance of 10 meters from the fire point. This work has been rectified;

2. The warehouse immediately formulated Regarding fire safety signs and placards, post and place them in the required parts; this work has been rectified;

3. The warehouse material department immediately purchased a large number of fire extinguishers and inspected the warehouse woodworking processing area, warehouse, Unqualified fire extinguishers in the plate stacking area were replaced and missing parts were supplemented; this work has been rectified;

4. All subcontracting units are required to further strengthen the education of on-site construction personnel and educate workers on Smoking in the dormitories is strictly managed to minimize fire hazards in the dormitories, and this work has been rectified;

In the future work, we will continue to work hard, strengthen publicity work, and improve the fire protection awareness of the whole people; Carry out fire prevention duty safety inspections regularly and irregularly to prevent the occurrence of fire forever. Fire safety self-inspection report sample (Part 6)

In order to further and better implement the spirit of superior winter fire safety work instructions, establish the "safety first" ideological concept, and prevent possible fire safety problems before they occur, Hidden dangers were nipped in the bud. Our school did the following work during the self-examination process.

1. Strengthen leadership and implement responsibilities

First, establish a safety work leadership organization with the principal as the team leader, with the political and educational office, logistics office, security department and school year director as deputy team leaders , a leading group composed of each class teacher as a member, from a political perspective and in a spirit of responsibility to teachers and students, puts the school's winter fire safety work in an important position.

Secondly, various rules and regulations have been established and improved to implement the safety work responsibility system in accordance with the principle of "whoever is in charge is responsible". Third, a safety target responsibility letter is signed level by level, and work indicators are broken down layer by layer to form a vertical and horizontal winter fire safety target responsibility network, so that all systems are in place and responsibilities are assigned to individuals.

2. Strengthen publicity and sound the alarm

On the whole, the school uses radio and school newspapers to conduct winter fire safety knowledge learning lectures for students, and partially uses class posters to conduct winter fire protection Popularize safety knowledge, establish the ideological concept of "safety first" from an individual perspective, and deeply ingrain "safety first" in everyone's mind, so that unsafe accidents will not occur and unsafe accidents can be responded to in a timely manner.

First, the school organizes teachers and students to conscientiously study and publicize the contents of school safety laws, regulations, video materials and safety work manuals, so that safety knowledge such as fire protection, transportation, sanitation, and public security can be brought into the classroom, and fundamental We should enhance the safety awareness of teachers and students, improve their self-protection and self-rescue capabilities, attach great importance to national security education and "three defenses" education, and do a good job in safety education for catastrophic or sudden events that may occur in the future.

Second, the school further strengthens the education and development of students' traffic safety knowledge, cultivates students' good behavioral habits, and actively cooperates with the traffic police department to be on duty at key sections of students' school days and after school. In particular, the east school gate blocks the intersection outside the west gate. There are many people, many cars, and the road is narrow and uneven, which poses a hidden danger to the safety of students. The school requires each class to be specially reminded by the class teacher to abide by traffic rules and pay attention to personal safety before school.

Thirdly, the school organized a safety evacuation drill at the end of October to train students to be orderly when going up and downstairs and avoid safety accidents caused by crowding. Logistics assigns a special person in charge to inspect various sports equipment from time to time. If any damage is found, it must be repaired or replaced in a timely manner. Large or dangerous sports equipment shall not be opened to students without safety guarantees and teacher protection. Supervise students outside of class and on-campus. In safety activities, we must strengthen prevention against problems that may occur outside of class and outside school during the season, strengthen the teacher's duty system between classes and after class, and must completely eliminate unsafe factors.

Fourth, the school earnestly carries out education on cherishing life and mental health education. It has extended the opening hours of the psychological consultation room this semester, accepts psychological consultation from students at any time, helps students solve their problems, and strives to reduce various abnormal death incidents. occurrence, actively carry out materialist and atheist propaganda, strictly prohibit students from entering and leaving religious sites for activities, deeply analyze the harm of cult organizations such as "", strictly prevent students from being corroded by cult ideas such as "", cooperate with relevant departments to vigorously carry out distance education, and treat serious psychological problems Students with disabilities should be given more attention and help to avoid unexpected events.

Fifth, the school strictly organizes teacher-student gatherings, outings, entertainment and other activities, and must report to the principal for approval, and formulate safety precautions to ensure that there are no omissions in organizational management, and it is strictly prohibited to organize students into dangerous activities Visits to various places (construction sites, coal mines, etc.) to effectively eliminate hidden dangers that may occur to students in large-scale activities.

Sixth, the school should establish a normal safety work information reporting system. Any major incident must be reported to the principal immediately.

3. Improve facilities and transform the environment

In order to eliminate hidden dangers, the aging lines were replaced, fire-fighting equipment was added in a timely manner, and each shift of the anti-theft windows on the first floor was opened early by a dedicated person In the evening, the emergency lights in the building were tested, and the "safety exit" signs at each stairway were re-pasted. The cafeteria has been renovated this semester and is thoroughly disinfected every day. All staff hold health certificates. Stores strictly control purchase channels. Food without health permission is not allowed to be purchased, and expired and spoiled food is not sold. Unlicensed vendors at the school gate are prohibited. We cooperated with the industry and commerce to clean up, and the security department cooperated with "110" to deal with the radical elements that disrupted the safety of the school. The guards strengthened the registration of people entering and leaving the campus. In particular, students who leave the campus in the middle must have a note from the class teacher before they can be released. Motor vehicles are not allowed to enter the campus at will. The personal safety of teachers and students is guaranteed.

IV. Key parts, key inspections

The audio-visual classroom consumes a lot of electricity and has many lines. Logistics staff and audio-visual teachers should check frequently to ensure that there is no leakage and no overload operation. There are flammable, explosive and other chemicals in the laboratory. Laboratory personnel must operate according to regulations and keep them properly. Regularly disinfect toilets.

The canteen hygiene has been inspected and accepted by the health and epidemic prevention department many times. The food in the canteen must be carefully cleaned and disinfected, and the processing procedures must be strictly followed. No illegal operations are allowed to strictly ensure that no poisoning incidents occur.

The above is the specific work done by our school during the self-inspection and self-examination process. We will further improve it in future work, and make up for the loopholes in a timely manner so that there is no place for hidden dangers. Fire safety self-examination report sample (Part 7)

In order to implement the "Fire Protection Law of the People's Republic of China", strengthen fire safety work, prevent fires and reduce fire hazards, and protect the lives of schools, teachers and students Property safety, according to the requirements of superiors and the deployment of the Education Bureau, our school’s fire safety work report is as follows:

Continue to do a good job in routine fire safety work:

1. School leaders pay attention For fire safety work, the school’s fire safety responsibilities have been formulated and the fire safety responsibility system has been implemented. In order to further strengthen the leadership of fire protection work, in accordance with the requirements of superiors and combined with the actual situation of the school, our school has established a fire safety leadership group. The group leader is Duan Xuhua, the principal. The group members include the heads of various departments and the head teachers of each class. The group has formulated the school's Fire safety work responsibilities should be assigned to everyone, strengthen their own fire safety management, work together to do a good job in school fire safety, continuously improve self-prevention and self-rescue capabilities, and prevent accidents from happening.

2. Vigorously publicize the "Fire Protection Law of the People's Republic of China" to make fire safety work a household name. In order to do a good job in fire safety work, our school gathered all teachers and students to hold a school meeting to educate teachers and students on fire safety, emphasize the importance of fire safety, and vigorously publicize the laws and regulations on fire safety through radio, blackboard newspapers, kitchen windows, etc. Strengthen fire safety management and require every teacher, student and employee to be familiar with fire safety responsibilities. *** Let’s do a good job in fire safety work in schools.

3. Organize class teachers to participate in fire safety classes in the county to educate students on fire safety, especially in terms of fire safety systems and fire safety operating procedures. Popularize the knowledge of fire, electricity, gas, fire prevention, fire extinguishing, fire escape and self-rescue to students, and strive to improve students' self-prevention and self-rescue abilities.

4. Carry out fire safety inspections to eliminate fire hazards. In order to prevent fire hazards before they occur, our school organizes regular fire safety inspections by relevant personnel, organizes and improves fire protection facilities, and eliminates fire hazards. Through this fire safety inspection, the fire safety awareness of teachers and students was enhanced, and the fire legal concepts of teachers and students were improved.

5. The fire safety team also conducts regular inspections and supervision of key places to reduce the occurrence of unnecessary accidents.

According to the requirements of superiors, our school’s self-examination of the campus fire protection situation is as follows:

(1) The school has inspected the fire protection facilities, equipped with fire hydrants and fire extinguishers as required, and Key areas of fire protection must be managed and responsible for by dedicated personnel.

(2) Decided to carry out extensive fire protection knowledge education activities among teachers and students, and incorporate the school’s fire protection work into the school’s regular work; the school’s fire safety self-examination will also be conducted by leaders, teachers, and students* ** colleagues participated and found problems and asked Chengyun to correct them in time.

(3) Schools must continue to strictly prohibit students from lighting candles to prevent fires; at the same time, class teachers must provide timely education and integrate the awareness of fire prevention and theft prevention into regular education.

(4) In response to the superior’s request to “create a safe school”, the school should continue to pay more attention to the “four preventions” work. In order to make our school the safest school, it will update pharmacy equipment and strengthen fire management. Immediately invite the public security fire department to conduct an effective fire protection knowledge lecture and launch a fire protection knowledge competition.

(5) The school will try to increase investment in fire protection. In order to strengthen the fire prevention capabilities of computer rooms and laboratories, the school will improve the fire extinguishers and fire hydrants in major parts.

In short, our school will strive to create a safe and civilized school, and will try its best to ensure that management, personnel, measures and ideological awareness are in place. In the future, we must further strengthen fire safety education, conscientiously implement the safety responsibility system, continuously improve fire safety measures, and ensure the safety of teachers and students' lives and property.