Transparent LOGO material-how to make transparent watermark logo

How to make a transparent LOGO with Mito Xiu Xiu? First, run the transparent watermarking software, import the picture material, double-click or directly click File-Open in the blank of the software, or press the shortcut key CTRL+O, so there are so many ways to choose, or double-click to open directly is faster. After importing the material, you will see a lock on the right. In fact, the layer is locked. We double-click to unlock the layer, and the next operation can be successfully completed. After unlocking the layer, let's go to the next step. Click Options-Color Range: At this time, you will find that the mouse becomes a straw, which is the same as the straw used to absorb colors to choose. Then we can use a straw to absorb the white background and adjust the color tolerance to choose. The greater the tolerance, the wider the selection range. The tolerance is adjusted to 125 for your reference.

Then press the Delete key, and you will find that the white background disappears magically. At this point, the background of the logo picture is transparent.

Press Ctrl+D to deselect, and you can export the picture. How's it going? Super simple. This is a very quick method. You only need a few simple pictures to get a transparent logo picture. Click File-Save As, and then select PNG format in the format options. Remember, you must choose PNG format, otherwise the exported image is not a transparent logo image. Remember! Choose a good name, choose the save path, and then click OK.

Methods/steps of how to make transparent watermark LOGO

1, run Photoshopcs5 software;

2. Find the menu file = = and create a new one. Set the corresponding logo size and pixels, select "transparent" background in the pop-up menu as shown below, and click OK.

3. Drag the prepared logo material into the built background picture. The effect is shown in the figure below. Adjust the appropriate size (I specially set a larger size in the previous step to facilitate the demonstration here), and double-click the mouse in the image area:

4. Save the picture: file = = "Save in all formats of the web and devices;

5. Adjust the picture format to png8 or gif in the pop-up interface, as shown in the figure, and click Save to save it to the required location.

Matters needing attention

When saving, you must select the menu "Save in all formats of web and devices". If "Save" is directly selected, the format saved last time will be saved by default. If jpeg format was used before, it would not be transparent.

How to add a transparent logo to the cutting? How to add a transparent logo to a video by cutting? The following is a detailed introduction.

Open the mobile phone clipping APP first, and then click the Start Creation button above.

Select the video file you want to start selecting, and then click the Add to Project button.

Then click the picture-in-picture button at the bottom.

Select the logo image, and then click the bottom to add it to the project.

Adjust the size and position of the logo.

Select the logo material file, hold down the right box and drag it to the right until it is synchronized with the video time.

Then click the export button on the right to complete this operation.

Summary First, open the mobile phone clipping APP, and then click the Start Creation button above.

Select the video file you want to start selecting, and then click the Add to Project button.

Then click the picture-in-picture button at the bottom.

Select the logo image, and then click the bottom to add it to the project.

Adjust the size and position of the logo.

Select the logo material file, hold down the right box and drag it to the right until it is synchronized with the video time.

Then click the export button on the right to complete this operation.