What is the content of safety inspection on the construction site?

Content of safety inspection on construction site

(1) The construction safety inspection of building engineering mainly examines the safety idea, safety responsibility, safety system, safety measures, safety protection, equipment and facilities, education and training, operation behavior, use of labor protection articles, and handling of casualty accidents.

(2) The specific inspection items and inspection standards shall be determined according to the characteristics of construction and production.

A, check the safety thought is mainly to check the project staff headed by the project manager (including subcontractors) awareness of safety in production and the importance of safety in production.

B, check the safety responsibility is mainly to check the establishment of the site safety production responsibility system; Decomposition and assessment of safety production responsibility objectives; Whether the safety production responsibility system and responsibility objectives are implemented in each post and personnel and confirmed.

C, check the safety system is mainly to check the establishment and implementation of various safety production rules and regulations and safety technology operating procedures.

D, check the safety measures is mainly to check the site safety measures plan and all kinds of safety special construction scheme, audit, approval and implementation; Focus on checking whether the content of the scheme is comprehensive, whether the measures are specific and targeted, and whether the on-site implementation operation is consistent with the content stipulated in the scheme.

5) Check the safety protection mainly to check whether all safety protection facilities such as limb and hole are in place and whether there are potential safety hazards.

6) Equipment and facilities inspection mainly checks whether the purchase, lease, installation, acceptance, use and process maintenance of the equipment and facilities put into use on site meet the requirements; Whether the safety devices of equipment and facilities are complete, sensitive and reliable, and whether there are potential safety hazards.

E. Check whether the education and training mainly check whether the on-site education and training posts, education and training personnel and education and training contents are clear, specific and targeted; Whether the three-level safety education system and the system of holding certificates for special operations personnel are in place; Whether the education and training files are true and complete.

F, check the operation behavior is mainly to check whether there is any illegal command, illegal operation and violation of labor discipline in the process of site construction.

G, check the usage of labor protection articles is mainly to check whether the procurement, product quality, quantity and usage of labor protection articles and appliances on site meet the requirements of safety and occupational health.

H. Check the handling of casualty accidents, mainly to check whether there are any casualty accidents at the scene, whether the casualty accidents have been investigated and handled according to the principle of "four don't let go", and whether corrective and preventive measures have been formulated in a targeted manner; Whether the formulated corrective and preventive measures have been implemented and achieved practical results.

? General situation of construction site

Cantonese refers to construction sites, construction sites, or construction sites for short. A construction site is a place where construction projects are developed and civil engineering is carried out. Its scope is often closed by fences, barbed wire or fences, which limits the entry and exit of people, materials, machinery and vehicles. Guarded by the property manager. You may need to register your identity and wear a helmet when entering or leaving.

brief Introduction of the content

Design change and engineering visa work are very important in construction management, because it involves a wide range of contents, complicated reasons and poor regularity, and it takes a long time to determine its cost. Generally, the project cost adjusted due to design change and project visa accounts for nearly 20% of the total settlement of unit project completion, ranging from 6%, especially in technical transformation and technical measures, accounting for more than 20%, and sometimes even reaching 40%. Therefore, it is a great event for the construction unit to attach importance to and do this work well. I think it is the first important thing to know and understand the meaning and content of design changes and engineering visas, so as not to help.

safety measure

1. Before entering the construction site, construction personnel must carry out education and assessment on construction safety and fire control knowledge. Employees who fail the examination are prohibited from entering the construction site to participate in the construction, and must wear safety helmets when entering the construction site.

2. Strictly carry out the operation procedures, and shall not command or operate illegally, have the right to refuse the instruction of illegal operation, and have the responsibility to stop others from operating illegally.

3. Personal protective equipment must be worn correctly during construction operation, and safety helmet must be worn when entering the construction site. Don't use fire without permission, and don't operate after drinking.

4. Personnel engaged in aerial work should experience it regularly. Anyone who suffers from hypertension, heart disease, anemia, epilepsy and hunger and is not suitable for aerial work shall not engage in aerial work.

5. Wear non-slip shoes when working at high altitude, steel bars and structures.

6. The site electricity must be managed by special personnel, and a special distribution box should be set up at the same time. It is forbidden to connect and pull at random, and the system of listing electricity is implemented, especially to prevent illegal operation and personal, line and equipment accidents.

7. Electric drills, hammers, electric welding machines and other electrical appliances must have leakage protection devices and good grounding protection ground wires. All electrical appliances and cables must be inspected regularly to ensure good insulation. When using electrical appliances, you should wear insulating shoes and gloves.

8. The lighting power supply of the construction site must use a safe voltage with a voltage lower than 36V. When all electrical appliances are not in use, the power supply must be cut off at any time to prevent the equipment from burning out.

9. Where blowtorches, electric welding machines and necessary open flames are used, an application for fire registration shall be filled in, and a special person shall be appointed for guardianship, and fire-fighting equipment shall be carried with him to ensure the implementation of fire-fighting measures. When welding, special attention should be paid to check whether there are flammable materials below and make corresponding protection. After use, check that there is no fire before leaving.

10. When working at high altitude and on the construction site, such as pipeline lines and equipment installation and debugging, it is necessary to strictly implement the safety technical regulations, and it is strictly forbidden to operate illegally and smoothly, resulting in accidents that should not occur.

1 1. In the whole construction process, we must strictly implement the national, provincial, municipal and ministerial regulations and relevant clauses on engineering fire protection.

12. Always equip and maintain fire fighting equipment for maintenance and use. Seriously implement the fire responsibility system step by step and do a good job in fire control.

13. Equipped with safety slogans.