How to design the logo of dental clinic

1. In clinical design, the only standard to follow is: function is the foundation, and image is the beautification and sublimation based on function.

The front desk of the clinic is the essence of the whole clinic.

Functional design: Even the best image will lose its freshness after two years of clinic operation. At this time, whether the function can play a good role is the standard to test the quality of clinic front desk design.

The front desk/lobby of the clinic is the beginning of the whole service and sales, and many things can be done in 5- 10 minutes.

Our working procedures are usually as follows: function determination-function classification-similar function area division-auxiliary decentralized function area division-personnel travel route design-detailed service items in each function area-special service hardware production-beautification design after determination.

Appearance image

The style of each clinic should be set according to different venues, scales and heights.

Design points:

The reception desk should face the gate.

② The introduction of consultation room should be placed where patients can stop.

③ The introduction of diagnosis and treatment guide should be designed according to the patient's treatment route.

(4) Staff can easily monitor and inspect all reception areas.

⑤ The internal working area can't be seen by patients who just entered the door.

3. The main function of the clinic is treatment, so more attention should be paid to the use of functions in the design of the clinic:

Detail design: how to clean better?

The clinic doesn't talk about how to treat, let's see how to clean it first.

In the decoration of the floor, different colors should be used to divide different sanitary functional areas.

Most of the furniture designed is floorless, which is convenient for cleaning in the future.

The design of garbage disposal port should be convenient for nurses to clean and should also be located on the garbage container.

Clean area, cleaning area and administrative area should be clearly distinguished, and the above decorations should be separated according to color, style and position. The most difficult thing is the location design.

The design of the skirting line is a very important link whether the clinic can maintain good sanitary conditions, and it is also a link that is often ignored.

It is suggested that the skirting line should be made of marble or special tiles, so that the skirting line will not get dirty in the future cleaning work.

The design of lighting can improve the illumination of the clinic and visually improve the brightness of the walls and side cabinets, which is more hygienic.

The arrangement of lighting can divert patients' attention, and combined with wall decoration, the theme of the clinic can be displayed.

Line layout: including waterway, circuit and gas road, mainly considering the problems of capacity expansion, maintenance and line change.

4. The overall structure of the clinic is the complete embodiment of the process and arrangement of the clinic owner.

In the whole design, the use frequency of each component to be put into design should be calculated cumulatively, and the attribute factors such as the size and quantity of each functional component should be set. Then, the functional part should be connected with the attribute part, such as the location of each room, reception room, general room, waiting room, X-ray room, disinfection and so on. It should be finally determined by limiting parameters such as frequency of use, probability of use and route return. The route of personnel flow should be kept to a minimum, and the crossing route should be used as little as possible.

5. Arrange clinic design according to the quality and composition of clinic staff.

The full play of clinic functions is closely related to the composition and quality of the staff in the clinic. If there are not more skilled nursing staff in a clinic, CCTV should be used more in the design of the whole monitoring station, and the skilled nursing staff should be placed in the middle position, so as to give full play to its supervision and guidance role and drive the service level of the whole clinic. This is more suitable for the design of mass large clinics.

If there are more skilled staff in the clinic, the level is average. In the design, more attention should be paid to the delineation of separated and hidden areas, which can bring more quiet and private medical space to customers and is more suitable for the design of high-end clinics.

Decoration of modern dental clinic;

Establish a dental clinic

1. Waiting room

⑴ Service Desk: It is mainly responsible for reception, consultation, medical guidance, calling, medical record management and charging.

⑵ Layout: There are sofas, tea, flowers or bonsai; Books and periodicals, pictorial, abstracts and materials related to oral health education for patients; Film and television equipment can broadcast oral health education knowledge, or scenery films, comedies and so on.

(3) There should be toilets around the waiting room, and dressing tables should be set for patients to wash their hands or make up if possible.

2 consulting rooms

(1) Treatment work area: comprehensive treatment desk, assistant operation desk, and office desk for writing medical records.

② cooperation with the treatment area

3.x-ray room

Dental X-ray machine and oral curved X-ray machine are indispensable inspection and diagnosis equipment in dental clinic. Dental clinics abroad generally set up dental tablet machines next to dental chairs, but the health and epidemic prevention institutions in China do not allow them. Therefore, the clinic must establish a radiation room and a radiation room according to the radiation protection requirements stipulated by the epidemic prevention department.

⑴ Photography room: The power of ordinary dental X-ray machine is very small, the general current is 0.5~ 10mA, and the focal length is 0.3mm× 0.3mm ~ 0.8mm× 0.8mm. The wall is generally protected by lead skin with a thickness of 0.5mm, and the lead equivalent is greater than1.0mpb. When building, the lead skin is buried in the wall. Standard lead screens can also be used. The contrast room should be adjacent to the diagnosis and treatment room to improve work efficiency.

If the movable lead board room is used, it can only accommodate 1 patient and X-ray machine, and the control part of the X-ray machine is placed at the lead glass outside the lead board room, which is convenient for operation. If there is no protective wall installed in the photo room, a control room with protective facilities can be set up for operation.

⑵ Film processing room: conditional clinics are equipped with digital dental X-ray machines or digital curved X-ray machines. After taking X-rays, patients can receive them through CCD sensing, display them on the computer or print them directly, and send them to the dental treatment desk for doctors to use through the network system. There is no need to set up a developing room.

Clinics should generally be equipped with an automatic dental X-ray processor which can be operated in a bright room. If limited by economic conditions, a small darkroom can be set up for film development. The darkroom covers an area of 4~6 square meters and has three washing pools. Due to the high indoor temperature and acidity, ventilation facilities should be installed to maintain air circulation.

There should be a bright room outside the darkroom, which can be used to prepare potions, dry films or arrange the X-rays taken.

4. Disinfection room

(1) Design standard of disinfection room: pollutants and sub-pollutants must be separated; Disposable articles should be disinfected initially after use, and then sent to special departments for recycling.

⑵ Disinfection equipment for mobile phones and instruments: it should include cleaning machine, maintenance oiler, sealing machine, high-temperature autoclave, etc.

⑶ Disinfection room environment: bright lighting, ventilation, dust removal, air sterilization and other devices should be installed. There is a pool and sewer in the room, and the sewer should be connected to the sewage treatment station.

There is no mechanic room in a general small clinic in the model room, and the repaired parts can be sent to the mechanic processing center for production. But the model room is necessary, and the plaster model is mainly cast. The room is best located on the first floor, with an area of about 6~8_. The edge of stone table top with pool should be set. Sewers should be thick and straight, with a diameter of 150~200_, to prevent gypsum blockage. Before entering the underground drainage pipe, a gypsum precipitation field should be set up to precipitate gypsum. A closet should be set indoors to store gypsum. Plaster model trimmer, plaster model cutter and vibrator can be placed on the side table.

(2) standards for clinic decoration

The grade and style of dental clinic decoration should be decided according to the orientation of the clinic. The overall requirements should highlight the professional characteristics and cultural atmosphere of the consultation room, and create a relaxed and comfortable environment for consultation, which is conducive to controlling cross-infection in oral medical services. Among them, the family-style warm-hearted dental clinic, which is helpful to alleviate the fear of dental patients, is being welcomed by foreign patients.

(1) The consulting room is bright, and the ceiling lamp should be a ceiling lamp.

(2) Good ventilation, exhaust and air disinfection facilities. Fans should not be used, and the filters of air conditioners must be easy to clean.

(3) Floor materials should be smooth, wear-resistant and non-slip, and carpets are absolutely not suitable.

(4) There should not be too many hanging objects on the wall. The coating should be made of corrosion-resistant and easy-to-clean materials, and it is best to use cool colors, such as light blue or milky white, to give people a relaxed feeling.

5] The furnishings in the clinic, including furniture and doctor's diagnosis table, should be simple, easy to clean and disinfect the surface.