How to save electricity with electric lights?

The direct way for management to create benefits is to save electricity. Although the switch sticker is very small, over the years, from the scale benefit of property management, the absolute cost of a large number of lamps is not small. It is particularly important to control the energy consumption cost of property management in hotels, office buildings, businesses and other service places. Green and low-carbon buildings especially advocate low-carbon and environmental protection.

1. Use energy-saving lamps as much as possible. The energy-saving lamp has obvious energy-saving effect. 1 1 watt energy-saving lamp has the same lighting effect as a 60-watt ordinary lamp, and can save electricity by 78%.

2. Pay attention to the selection and correct use of energy-saving lamps. Choose a lamp with appropriate power, and the light efficiency of energy-saving lamps is generally 5 times higher than that of incandescent lamps; Pay attention to the voltage marked on the lamp when using the energy-saving lamp, so as to avoid the voltage discomfort and burn out the lamp; Try to reduce the switching times of the lamp, and the service life of the lamp will be reduced by about 3 hours at a time. If the fluorescent lamp is replaced by a new electronic ballast, it will consume less electricity.

3. Special lighting control. In addition to energy-saving lamps, lamps used in corridors, stairs and doorways should be equipped with multi-control switches, so that the switches can be controlled upstairs and downstairs, inside and outside the door; In some places, especially the headlights at the door, touch-type delay lights or voice-activated lights can be installed, which is convenient for turning off the lights. Dimming lights should be used beside the bed, and people can adjust the lighting effect according to their needs to save electricity. Step reading can also be connected to a crystal diode to reduce voltage and save electricity. This method must be operated by a professional electrician. Suitable for stairs, corridors, bathrooms and other lamps. A crystal diode can be connected in series to reduce the voltage, which can save electricity, but it has little effect on brightness.

4. Crystal diodes can also be connected in series to reduce the voltage to save electricity. This method must be operated by a professional electrician. Suitable for stairs, corridors, bathrooms and other lamps. A crystal diode can be connected in series to reduce the voltage, which can save electricity, but it has little effect on brightness.