Is it dangerous to punch in a shoe factory?

More dangerous.

1: Understanding of the machine 1. Mechanical cutting equipment is divided into: flat hydraulic cutting machine, gantry cutting machine, hydraulic rocker cutting machine, movable head cutting machine, high-speed flat cutting machine. 2. Automatic cutting equipment is divided into: computer moving head cutting machine, laser cutting machine, high-pressure water beam cutting machine, projection scanning cutting machine. 3. Commonly used cutting equipment include: flat hydraulic cutting machine, hydraulic rocker cutting machine. 2: Operation essentials 1. First main parts, then secondary parts, first parts, then small parts, good and bad matching (put some slightly defective leather materials in the covered parts and not obvious exposed parts of the finished shoes), reasonably Utilize disabled materials. Three: Operation process 1. Receive the mold, check the mold, collect the raw materials, check the raw materials and sample shoes, debug the machine, cut a piece for a trial, self-inspection, write the order number, package and label, return the material, and put the half-finished parts into storage. Withdraw the knife. Four: Number of cutting layers 1. Single-layer punching of leather material: 2. 4-layer punching of synthetic leather and artificial leather materials (mid-lining, sponge, material with holes and needles). Five: Cutting machine stroke Cutting machine stroke = cutting backing plate thickness + punching material thickness layers + knife die thickness (back height) + operating space height (including the depth of the knife embedded in the backing plate, generally 0.5mm-1.0mm) , Six: Operation requirements 1. Before using the punching knife, if there is a cutting knife with pinholes and punches, EVA must be filled in before operation. The EVA piece should be 0.3-0.5mm higher than the knife surface. 2. Care must be taken before cutting. Check the material color, specifications, texture, and material, and distinguish the material grain, cutting direction, punching knife number, and code section. 3. The edge distance between knives is 0.5m or zero. Leather material within 1m, mesh within 2m.

How can the small Jilong Town shoemaking industry become bigger? Zhang Guoqiang, director of the Quality and Technical Supervision Bureau of Huizhou City, Guangdong, said: "With the local government's emphasis on quality work and strong support, the quality and technical supervision department continues to follow the standards from Strengthen assistance and guidance to the shoe industry in terms of measurement, measurement, quality management and famous brand cultivation, thereby achieving the healthy and orderly development of the shoemaking industry cluster in Jilong Town and even Huidong County."