Is there an aluminum veneer processing factory in Xiamen?

There are not many aluminum veneer manufacturers in Xiamen, and the quantity is small. You can also choose the website to find direct selling manufacturers in other regions. The most important thing is to identify the quality of products. The following identification methods are available.

How to distinguish the quality of aluminum veneer of curtain wall? Professional aluminum veneer manufacturers teach you to distinguish, the key depends on the following points.

A, aluminum veneer surface treatment process

The different spraying process of aluminum veneer is related to the service life of aluminum veneer. The order of aluminum veneer treatment technology is: fluorocarbon three coating >; Fluorocarbon secondary spraying > thermal transfer wood grain or stone grain >: polyester paint > polyester powder spraying >: electrostatic powder spraying, the better the front quality, of course, the more expensive; It is best to use fluorocarbon for aluminum veneer of outdoor curtain wall, which has good weather resistance. Fluorocarbon spraying process can be used for 20 years without discoloration. Indoor aluminum veneer can have more choices according to personal economic conditions and aesthetic pursuit.

Second, check whether the manufacturers cut corners.

Carefully observe the surface treatment of aluminum veneer. Some materials are very thin. But now, in order to attract customers, many aluminum veneer manufacturers do not hesitate to quote below the cost price, cut corners and muddle through, and reduce the thickness of aluminum plates. However, in order to achieve the product thickness required by customers, they sprayed the primer very thick. This practice makes the primer on the surface of aluminum plate unable to cure, and it is easy to fade and change color over time. Therefore, when you see an offer far below the general market price, you must be cautious. After all, there is no good product because it is cheap. If you lower the price, manufacturers will try their best to lower the cost to make a profit, and the users will suffer in the end.

Third, about the choice of manufacturers.

If the goods are large, you should go to the curtain wall aluminum veneer manufacturer and make a field trip to see whether the factory is large or not, whether the machines are advanced or not, and whether the production technology is available. The quality of technology also affects the service life of products, which is easily overlooked by customers.

Fourth, look at raw materials.

Aluminum is divided into several grades according to its purity. Generally, the quality of aluminum veneer material for curtain wall can be judged by the knocking sound, and the sound of good aluminum alloy material is crisp and loud. When you buy it, you can tap the aluminum veneer by hand to try the sound. The sound is not a big problem, and the material is ok. According to the content of alloying elements, aluminum can be divided into eight series, namely:

1XXX pure aluminum system is over 99.00%.

2XXX aluminum copper

3XXX aluminum-manganese alloy

4XXX aluminum-silicon alloy

5XXX aluminum-magnesium alloy

6XXX aluminum magnesium silicon alloy

7XXX aluminum-zinc alloy

However, it does not mean that the higher the aluminum content, the better. The aluminum content is too high and the hardness is not enough. Therefore, the raw material of aluminum veneer is mostly aluminum alloy, and elements such as copper, silicon and magnesium are added to increase the hardness of aluminum plate. The selection of materials should be distinguished according to the use function of aluminum veneer, which is complicated and will not be repeated here.

Manual only, please give me a compliment if you find it useful.

Aluminum veneer price calculation, process flow, quality appraisal, installation technology and other issues can consult Bian Xiao-Metal Building Materials.

Dry-hung aluminum veneer

Related nouns: