How to solve DIY manual sticker drawing method

Paper, face cloth, interlining, adhesive lining (the adhesive lining is harder) and linen, iron, zipper, needle, ruler and button.

Steps/methods

First, cut out the pattern according to the following dimensions.

Then cut out four pieces of cloth according to the pattern, which are face cloth, lining cloth, adhesive lining (the adhesive lining is hard) and linen cloth in turn.

Heat the adhesive lining of fabric wallet with an iron to make it stick to the face cloth.

Then cut a piece of lining narrower than the pattern, sew a zipper on it, and add the width of the zipper, which is as big as the pattern. Front sewing method of zipper

Then put these pieces in the following order, stretch them with thread, and then trim them neatly with pattern contrast.

10 cm wide, 75 cm cloth, used to fold the card slot.

There are three card slots on the left and right, which should be as wide as the wallet after folding.

After folding, the back is lined with the same big cloth and stretched with thread.

Make a 3 cm wide diagonal line with a piece of cloth at an angle of 45 degrees.

Then, according to the following method, edge the folded cloth.

Then compare the stretched side with the stuck side and stretch. The inside is important, and the surface should be loose, so that it will be flat and beautiful after folding.