What safety measures do painters need during construction?

Safety and environmental protection measures: When the height exceeds 2m, inclined ladders shall be erected as required. Check before construction. The herringbone ladder used should land on the four corners and be placed smoothly. The ladder corners should be provided with anti-slip rubber pads and safety chains. Scaffolding shall be laid on the herringbone ladder, and the erection length at both ends of the scaffold shall not be less than 500px, and no two people shall operate in the middle of the scaffold at the same time. When the ladder moves, the operator must get down. It is forbidden to stand on stilts on ladders. People are not allowed to stand on the hinge shaft at the top of the herringbone ladder, and scaffolding is not allowed to be laid. The inclined ladder should be inspected frequently. If cracks, decay, loose wedge head and missing blocks are found, it shall not be used. Before construction, workers should be concentrated to carry out safety education and make a written disclosure. It is strictly forbidden to set up a paint material warehouse on the construction site, and the paint warehouse outside the site should have sufficient fire control facilities. There should be a safety slogan prohibiting fireworks on the construction site, and there should be a full-time security officer to supervise the site to ensure that there is no open fire on the construction site. Try not to leave paint materials after work every day. The remaining paint is not allowed to be dumped, and should be collected for centralized treatment. Garbage is classified and consumed according to environmental protection requirements. On-site cleaning shall be sprinkled by designated personnel, and there shall be no dust pollution. Wipe the grinding dust with a wet cloth. Low-noise equipment or other measures should be selected according to different noise sensitive areas around the construction site, and the construction time should be controlled according to relevant state regulations. When painting, operators should wear corresponding protective facilities, such as masks and gloves. So as not to hurt the lungs and skin of workers.

Open flame operations such as electric welding and cutting shall not be carried out within the coating workplace 10 meter. Workpieces that need to be painted and painted should be placed firmly and neatly. No painting is allowed within one meter around live equipment and distribution box. The work should be carried out at the assembly test site at a certain distance. It is forbidden to paint or spray paint on running equipment. When painting the products on the assembly line or the workpieces on the catenary, it should be done in the painting room. When operating, you must wear a mask or face mask. Wear a mask and protective glasses when polishing and deburring, and always check whether the hammer handle is firm. No one is allowed to stand opposite. Portable grinding wheel must have a protective cover, and the operator should wear rubber gloves. It is forbidden to wash your hands with gasoline and banana oil. The air pressure borne by the paint and spray gun in the booster box should be kept constant. Ready mixed paint, putty, nitrolacquer, vinyl agent and other chemical components and gasoline flammable items should be stored separately and sealed. The storage time of solvents and paints in the workshop should not exceed two days, and should be stored in a cool place.