On-site cement roof standard

1. Coverage: The basic requirement is that the cargo loading height is higher than the end wall 1m or above, or the gondola car with escort personnel shall not be covered with tarpaulin.

2, tarpaulin, tarpaulin rope net shall not be used as goods reinforcement materials.

3. The goods to be reinforced must be bundled and reinforced in front of the tarpaulin. There are no old rope ends, iron wires and other wastes left on the truck ropes.

4. When the cargo loading height is lower than the side wall of the vehicle, a tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin.

5. When the tarpaulin goods are easily damaged by the tarpaulin cover, anti-wear or protective measures should be taken between the tarpaulin and the goods.

6. Quality inspection before tarpaulin cover: the cloth body is complete, without damage, the eye socket is intact, and the marks and numbers are complete and clear. The rope is complete, complete, without joints, firmly inserted and correctly connected with the tarpaulin.

7. Covering method: the front (waist rope outward) is covered vertically. The hanging height of tarpaulins on both sides of the truck should be consistent. The height of the end wall covered by tarpaulin at one end of the truck brake is 300-500mm, and the height of the end wall covered by tarpaulin at the other end is about 600 mm.

8. Cover every car with tarpaulin. When the vehicle is short, the surplus part of the tarpaulin can be folded under the tarpaulin near the middle two waist ropes, and the two waist ropes in the folded part are diagonally tightened and fastened.

9. Tighten the corner rope of the tarpaulin, so that the corners of the tarpaulin expand inward into a triangle. After the two sides of the corner are squashed, they are folded to the end wall of the truck, and the corner is tightly wrapped at both ends of the vehicle, so that the pressure rope can press the corner.

Basic requirements of tarpaulin cover

The whole flat plate must be wrapped and fixed with rope, and it would be best if a layer of plastic cloth cover could be added inside.

How to use waterproof cloth

A tarpaulin is different from a sunshade net.

The tarpaulin can be widely used for making tents, freight yard tarpaulins, ship wharf tarpaulins, railway tarpaulins, open-air grain sheds, mine ventilators, outdoor wind-proof walls, jeep roofs, postal parcels, open-air carports, vehicles, ships, factories and mines, covering goods, making automobile tarpaulins, sheltering houses from rain, packaging goods, covering construction sites and sheltering houses from rain.

Cover directly with tarpaulin.

Special plan for construction dust control:

1, law enforcement officers went deep into the construction site, widely publicized relevant laws and regulations on site management, relevant law enforcement procedures and punishment standards, enhanced the legal awareness of the construction party, and urged its civilized construction.

2. Register the project name, development unit, construction unit, pavement hardening, enclosure setting, contact information and other related information of all construction units in the city in detail, and establish civilized construction files for site management according to the specific conditions of each site.

3. Actively communicate with developers in depth to form a two-pronged management model of internal supervision and external supervision.

4, the import and export of the construction site ground hardening treatment; Within 30 days after the completion of the project, level the construction site and remove accumulated soil and deposits.

5. In the construction operation that produces a large amount of mud, corresponding mud pits and mud ditches should be equipped to ensure that the mud does not flow out, and the waste mud should be transported by sealed tank cars.

6. A hard enclosure of not less than 2m should be set around the construction site.

7, in the construction site, set up vehicle cleaning facilities and supporting drainage, mud precipitation facilities; The muck truck can only be driven out of the construction site after mud removal and washing.

8. If the construction waste and engineering dregs cannot be removed within 48 hours, a temporary dump shall be set up at the construction site, and dust-proof measures such as enclosure and covering shall be taken for the temporary dump.

9. If bulk materials, construction wastes and dregs are transported on buildings, they shall be cleaned and transported in a closed way, and shall not be scattered at high altitude.

10. Real-time dust monitoring system, automatic alarm system and automatic dust suppression equipment shall be installed on the construction site.

Common methods of building thatched roofs

The meaning of up and down; This is the term in the cargo storage specification; It means that the cover above the pile is called the top cover, and the material bedding below the pile is called bedding.

Covering refers to covering the goods stack with special covering materials to reduce the erosion and damage of the goods by sunlight, rain, snow, wind and dust, and to protect the quality of the goods during storage. Commonly used tarpaulin materials are canvas, reed mat, bamboo mat, plastic film, iron sheet, iron tile, glass fiber reinforced plastic tile, plastic tile and so on.

The meaning of tarpaulin

My answer is; In Northeastern dialect, go away, which means that when the family has dinner together, there are pancakes or dried tofu on the table, and the dishes can be rolled together, the two people give in to each other.

Also, when working, a large piece of tarpaulin needs to be rolled into a barrel after use, and people who do other jobs will say to people who have nothing to do; I'll do the work and you roll the tarpaulin. In other words, you do that job.

Tent covering method

1. Coverage: The basic requirement is that the cargo loading height is higher than the end wall 1m or above, or the gondola car with escort personnel shall not be covered with tarpaulin. Tarpaulin and tarpaulin rope net shall not be used as goods reinforcement materials.

2. Goods that need reinforcement must be bundled and reinforced in front of the tarpaulin. There is no residue of old rope ends, iron wires and other wastes on the ropes of trucks.

Main methods of thatched roof

1. Coverage: The basic requirement is that the cargo loading height is higher than the end wall 1m or above, or the gondola car with escort personnel shall not be covered with tarpaulin. Tarpaulin and tarpaulin rope net shall not be used as goods reinforcement materials.

2. Goods that need reinforcement must be bundled and reinforced in front of the tarpaulin. There are no old rope ends, iron wires and other wastes left on the truck ropes.

3. When the cargo loading height is lower than the side wall of the vehicle, a tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin. When the tarpaulin is easy to damage the goods, anti-wear or protective measures should be taken between the tarpaulin and the goods.

4. Quality inspection before tarpaulin cover: the cloth body is complete, without damage, the eye socket is intact, and the marks and numbers are complete and clear. The rope is complete, complete, without joints, firmly inserted and correctly connected with the tarpaulin.

5. Covering method: the front (waist rope outward) is covered vertically. The hanging height of tarpaulins on both sides of the truck should be consistent. The height of the end wall covered by tarpaulin at one end of the truck brake is 300-500mm, and the height of the end wall covered by tarpaulin at the other end is about 600 mm.

6. Cover each car with tarpaulin. When the vehicle is short, the surplus part of the tarpaulin can be folded under the tarpaulin near the middle two waist ropes, and the two waist ropes in the folded part are diagonally tightened and fastened.

7. Tighten the corner rope of the tarpaulin, so that the corners of the tarpaulin expand inward into a triangle. After the two sides of the corner are squashed, they are folded to the end wall of the truck, and the corner is tightly wrapped at both ends of the vehicle, so that the pressure rope can press the corner.

Covering method

Goods that need reinforcement must be bundled and reinforced before tarpaulin covering. There are no old rope ends, iron wires and other wastes left on the truck ropes. When the loading height of the goods is lower than the side wall of the vehicle, a tarpaulin bracket can be placed, and anti-wear measures should be taken at the contact between the protruding part of the bracket and the tarpaulin.

When the tarpaulin is easy to damage the goods, anti-wear or protective measures should be taken between the tarpaulin and the goods. Quality inspection before cover: the cloth body is complete, without damage, the eye socket is intact, and the marks and numbers are complete and clear. The rope is complete, complete, without joints, firmly inserted and correctly connected with the tarpaulin. Covering mode is front longitudinal covering (waist rope outward). The hanging height of tarpaulins on both sides of the truck should be consistent.

The height of the end wall covered with tarpaulin at one end of the truck brake is 300mm-500mm, and the height of the end wall covered with tarpaulin at the other end is about 600 mm, and each vehicle is covered with tarpaulin. When the vehicle is short, the surplus part of the tarpaulin can be folded under the tarpaulin near the middle two waist ropes, and the two waist ropes in the folded part are diagonally tightened and fastened. Tighten the corner rope of the tarpaulin, so that the corner of the tarpaulin expands inward into a triangle, the two sides of the corner are flattened and folded to the end wall of the truck, and the corner is tightly wound at both ends of the vehicle, so that the pressure rope presses the corner.