How to clean the refrigerator?

Methods and steps of cleaning refrigerator

Tools: soft cloth, towel or sponge, clean water, detergent and brush.

1, before cleaning the refrigerator, cut off the power supply of the refrigerator and take out the food in the refrigerator.

2. Then take out the shelves, fruit and vegetable boxes and bottle racks in the freezer. Be careful, these are fragile things. Wipe the accessories with a rag dipped in detergent water. Dry it with a rag after cleaning, or put it in a ventilated and dry place to dry naturally. The drawers in the freezer are drawn out in turn, and the frozen food may not be taken out.

3. Let the freezer defrost naturally. Remember to put some towels under the refrigerator, release the frozen defrosting water and wet the floor.

4. Clean the refrigerator shell and door first, and wipe the refrigerator shell and handle with a slightly wet soft cloth. If there is a lot of oil, you can dip it in detergent to scrub it, and the effect is better. Dip the soft cloth in water or detergent, gently scrub the refrigerated container, and then dip it in water to wipe off the detergent. When cleaning the refrigerator switch, lighting lamp, thermostat and other facilities, please wring out the rag or sponge.

The ice in the freezer has melted, so you can clean it with a towel. Never shovel the ice on the evaporator plate of the freezer with a sharp object, which will easily shovel the evaporator and cause the refrigerator to malfunction. After cleaning, open the door and let the refrigerator dry naturally.

6. After the refrigerator is refrigerated and the refrigerator liner is cleaned, clean the refrigerator door liner. The refrigerator door seal is detachable, so don't pull it at random to avoid damage. The door seal was wiped with 1: 1 vinegar water, and the disinfection effect was also very good.

7. Clean the ventilation grille on the back of the refrigerator with a soft brush and wipe it with a dry soft cloth or towel.

8. After cleaning, plug in the power supply and check whether the temperature controller is set in the correct position. The refrigerator runs about 1 hour, check whether the temperature in the refrigerator drops, and then put the food into the refrigerator. At this time, the refrigerator cleaning is completed.