Construction safety awareness

1. Little knowledge on construction safety education

Little knowledge on construction safety education 1. What are the safety precautions on construction sites?

1. Before construction workers enter the construction site , education and assessment of construction safety and fire protection knowledge must be carried out, and employees who fail the assessment are prohibited from entering the construction site to participate in the construction.

2. Strictly implement operating procedures, and shall not give orders or perform illegal operations. We have the right to refuse instructions for illegal operations and have the responsibility to stop others from illegal operations.

3. Personal protective equipment must be worn correctly during construction operations, and a safety helmet must be worn when entering the construction site. No private use of fire is allowed, and operating under the influence of alcohol is strictly prohibited.

4. Personnel engaged in high-altitude operations should experience it regularly. Anyone suffering from high blood pressure, heart disease, anemia, epilepsy and those who are not suitable for high-altitude operations shall not engage in high-altitude operations.

5. Be sure to wear non-slip shoes when working at heights, on steel bars, or on structures.

6. On-site electricity use must be managed by dedicated personnel, and a dedicated distribution box must be set up. Indiscriminate connections and connections are strictly prohibited, and an electricity usage tagging system must be adopted to prevent illegal operations and prevent personal, line, and equipment accidents. occurrence.

7. Electric power and distribution boxes for electric drills, electric hammers, electric welders and other electric machines must have leakage protection devices and good grounding protective ground wires. All electric machines and cables must be inspected regularly to ensure The insulation is good, and insulating shoes and gloves should be worn when using electric machines.

8. The electricity used for construction lighting on the construction site must use a safe voltage of less than 36 volts. All electrical equipment must cut off the power supply at any time when not in use to prevent equipment from burning out.

9. Where blowtorches, welding machines and fires are necessary, fire application registration must be filled in and designated personnel should be assigned to supervise and bring fire-fighting equipment with them to ensure the implementation of fire-fighting measures. When welding, pay special attention to check whether there are flammable objects below and take appropriate protection. Check after use to confirm that there is no fire before leaving.

10. When working at high altitudes and on construction sites, such as piping and wiring, equipment installation, commissioning and commissioning, safety technical regulations must be strictly implemented and the work can be carried out smoothly. Illegal operations are strictly prohibited to cause accidents that should not happen. .

11. During the entire construction process, the national, provincial, municipal, and ministries’ regulations and relevant provisions on engineering fire protection must be strictly implemented.

12. Regularly prepare and maintain fire-fighting equipment, and be able to maintain and use it. Conscientiously implement the level-by-level fire protection responsibility system and do a good job in fire protection.

Extended information:

Safe construction also requires a safety system

1. Establish a safety responsibility system and identify responsible persons. Safety measures are a series of activities for planning, organizing, directing, coordinating or monitoring the safety production of construction projects. It can ensure personal safety, equipment safety, structural safety, property safety during construction and create a suitable construction environment. During construction, we must adhere to the policy of "safety first, prevention first".

The project leader is the person responsible for the project. The focus of control is the unsafe behavior of personnel during construction, the unsafe state of equipment and facilities, unsafe factors in the operating environment and unsafe defects in management. The responsible person must conduct safety inspections before construction to nip unsafe factors in the bud.

2. Set up a full-time safety officer to be fully responsible for the safety of construction projects, coordinate project safety production work, and ensure and supervise the implementation of various measures.

3. Strengthen safety education and publicity work to further improve safety awareness.

4. Strengthen construction site management. Adhere to the system of "three no-misses", "pre-construction disclosure and post-construction evaluation", strengthen the safety management of electricity use at construction sites, and strictly comply with the "Technical Specifications for Electricity Safety at Construction Sites" and other relevant regulations.

5. Construction should be carried out in strict accordance with specifications and procedures. Staff members must carry out construction in strict accordance with construction specifications, be cautious during construction, eliminate any chances of taking any chances, and have a deep understanding that "safety in production" is the main factor in striving for efficiency.

Sogou Encyclopedia - Construction Safety

2. Construction site safety knowledge

1. Earnestly study the national guidelines, policies, laws and regulations on safe construction, and firmly Establish the idea of ??"safety first" and enhance employees' safety awareness;

2. Comply with the company's three-level safety education regulations: all employees who are new to the site or change jobs (positions) must undergo safety training before taking up their posts. Education, and only those who pass the examination can join the job;

Special types of work (such as electricians, welders, crane workers, drivers) need to participate in professional training from the competent department. After passing the examination, they can work with a certificate;

p>

3. The project manager or safety officer should regularly provide safety education to employees on the following contents, and employees should voluntarily receive training:

? National laws and regulations on safe construction;

p>

? Company safety management rules and regulations;

? Operation of mechanical and electrical equipment and various safety technical regulations;

? Lessons learned and preventive measures for safety accidents;

? Three-level (entering the company, going to the site, and taking up the job) safety education content.

Conduct a safety knowledge theory assessment once every year (quarterly), and establish a safety assessment score file;

4. The project manager and safety officer conduct regular safety inspections on the construction site, and every employee All employees or workplaces should consciously accept inspections, investigate and deal with unsafe factors and hidden faults, and take preventive and corrective measures immediately.

5. When entering the construction site, you must use labor protection supplies correctly, wear a safety helmet on your head, tie your hat strap, work clothes, and labor protection shoes on your feet. Safety belts must be fastened when working at heights; it is prohibited to throw tools and equipment upward or downward, and high-altitude operations and dangerous construction must be operated by two people;

6. The construction site must be equipped with safety protection facilities and set up safety signs, and arbitrariness is strictly prohibited Moving and dismantling;

7. Employees must abide by safety construction disciplines and are strictly prohibited from:

? Blindly taking risks during construction and operating in violation of regulations;

? Fighting and drama at the construction site Noisy or drunk;

? Pulling temporary power lines without permission, using mechanical and electrical equipment without permission; Unlicensed personnel engaged in special types of work operations;

? Overloading the use of power equipment, cables, wire.

8. At the end of each day’s work, pack away the construction tools, equipment, and materials. For the completed installation project, the equipment, appliances, and materials in the warehouse should be properly kept to prevent loss or theft;

p>

9. The warehouse should be dry and free of corrosive gases to prevent warehouse equipment and equipment from deteriorating, moldy, and damaged, as well as deterioration in performance indicators. The warehouse should be equipped with fire-fighting and fire-fighting equipment;

10. Take it seriously If an accident has occurred or failed at the construction site, identify the cause and take corrective and preventive measures to prevent the accident;

11. In the event of a casualty accident, rescue must be carried out immediately, the site must be protected, and the accident report form must be filled in truthfully. Report;

12. Implement a safety reward and punishment system, give appropriate rewards to individuals who are advanced in safety, and give criticism, warnings, and financial penalties to those who fail to comply with safety regulations and refuse to change after repeated instruction, until expulsion

3. Contents of daily construction safety education

1. Observe labor disciplines, obey the instructions of leaders and safety inspectors, stay focused when working, stick to your posts, and do not engage in non-type of work without permission; strictly implement Operating procedures (including safety technical operating procedures and quality operating procedures, etc.); it is strictly prohibited to work after drinking.

2. Strictly implement operating procedures (including safety technical operating procedures and quality operating procedures, etc.); do not give orders or operate in violation of regulations; have the right to refuse instructions from orders that violate regulations, and have the responsibility to stop others from operating in violation of regulations . 3. Follow the instructions of the team leader and on-site construction workers, obey the assignments, unite as one, and complete the production tasks together.

4. Use personal protective equipment correctly. You must wear a safety helmet and buckle your hat strap when entering the construction site; you are not allowed to wear slippers, high heels or bare feet to work; you are not allowed to wear hard-soled shoes and slippery shoes with spikes Go high into the sky. 5. Various facilities at the construction site, such as "four-port" protection, safety signs, warning signs, safety operating procedures signs, etc., must not be dismantled or moved at will. Any movement must be approved by the person in charge of the on-site construction.

6. When working on site, pay attention to vehicle traffic and mechanical lifting.

When the derrick crane is in operation, no one is allowed to put their head, hands or body into the derrick. No one is allowed to pass under the spider plant after it is lifted into the air. No objects are allowed inside before the spider plant stops.

Carrying people on the Chlorophytum is strictly prohibited. 7. No joking or joking at work is allowed to avoid accidents.

8. Children are not allowed to enter the construction site, and vendors are not allowed to enter the construction site to sell snacks. 9. People who suffer from hypertension, heart disease, anemia, epilepsy, and other people who are not suitable for working at heights are not allowed to work at heights.

10. Other basic safety knowledge, fire prevention knowledge, rules and regulations, laws and regulations, safety helmets, electricity safety, clothing, equipment use safety, fire safety, etc. Construction safety refers to the discussion of issues such as strengthening safety awareness and doing preventive work during construction. There is also a Chinese book "Construction Safety".

Participate in safe production and civilized construction inspections at the construction site. Inspection methods include: routine inspections, special inspections, and joint inspections (1) Routine inspections: refers to daily inspections organized by the project manager or regular inspections organized by the construction enterprise For spot checks, the supervision engineer should participate in such self-inspection activities and review and sign activity records to urge rectification. (2) Special inspection: According to the civilized construction management documents issued by the Municipal Construction Committee, such as mud and soil excavation and sanitation and epidemic prevention.

Inspections on management materials, publicity and education, etc., as well as special inspections carried out in accordance with relevant documents of superior departments or inspections on key projects and parts. (3) Joint inspection: refers to the inspection carried out by the supervision team in three stages during the construction process (i.e. foundation, main structure and three stages before project completion) in accordance with the "Construction Safety Inspection Standards".

The scoring results are signed by the project manager or the on-site person in charge of the construction company or the person in charge of the supervision company, and serve as the main basis for assessing the construction safety level after the project is completed.

4. Daily construction safety education content

1. Observe labor discipline, obey the instructions of leaders and safety inspectors, concentrate on work, stick to your post, and do not engage in illegal activities without permission. For this type of work; strictly implement operating procedures (including safety technical operating procedures and quality operating procedures, etc.); it is strictly prohibited to work after drinking.

2. Strictly implement operating procedures (including safety technical operating procedures and quality operating procedures, etc.); do not give orders or operate in violation of regulations; have the right to refuse instructions from orders that violate regulations, and have the responsibility to stop others from operating in violation of regulations .

3. Follow the instructions of the team leader and on-site construction workers, obey the assignments, unite as one, and complete the production tasks together.

4. Use personal protective equipment correctly. You must wear a safety helmet and buckle your hat strap when entering the construction site; you are not allowed to wear slippers, high heels or barefoot to work; you are not allowed to wear hard-soled shoes and slippery shoes with spikes Go high into the sky.

5. Various facilities at the construction site, such as "four-port" protection, safety signs, warning signs, safety operating procedures signs, etc., must not be dismantled or moved arbitrarily. Any movement must be approved by the person in charge of the on-site construction. Can.

6. When working on site, pay attention to vehicle traffic and mechanical lifting. When the derrick crane is in operation, no one is allowed to put their head, hands or body into the derrick. No one is allowed to pass under the spider plant after it is lifted into the air. No objects are allowed inside before the spider plant stops. It is strictly prohibited to carry people on the Chlorophytum.

7. No joking or joking at work to avoid accidents.

8. Children are not allowed to enter the construction site, and vendors are not allowed to enter the construction site to sell snacks.

9. Anyone suffering from hypertension, heart disease, anemia, epilepsy and other persons who are not suitable for working at heights are not allowed to work at heights.

10. Other basic safety knowledge, fire prevention knowledge, rules and regulations, laws and regulations, safety helmets, electricity safety, clothing, equipment use safety, fire safety, etc.

Construction safety refers to the discussion of issues such as strengthening safety awareness and doing preventive work during construction. There is also a Chinese book "Construction Safety".

Participate in safe production and civilized construction inspections at the construction site. Inspection methods include: routine inspections, special inspections, and joint inspections

(1) Routine inspections: refers to daily inspections organized by the project manager For inspections or regular spot checks organized by the construction enterprise, the supervision engineer should participate in such self-inspection activities, review and sign activity records, and supervise rectification.

(2) Special inspection: According to the civilized construction management documents issued by the Municipal Construction Committee, such as mud and soil excavation and sanitation and epidemic prevention. Inspections on management materials, publicity and education, etc., as well as special inspections carried out according to relevant documents of superior departments or inspections on key projects and locations.

(3) Joint inspection: refers to the inspection carried out by the supervision team in three stages during the construction process (i.e. foundation, main structure and three stages before project completion) in accordance with the "Construction Safety Inspection Standards". The scoring results are signed by the project manager or the on-site person in charge of the construction company and the person in charge of the supervision company, and serve as the main basis for assessing the construction safety level after the project is completed.

5. Can anyone tell me some common sense about construction site safety? Thanks

Construction production is characterized by fixed products, mobile personnel, and mostly open-air and high-altitude operations. The construction environment and The working conditions are poor, unsafe factors are constantly changing with the progress of the project image, the regularity is poor, and there are many hidden dangers. Therefore, the construction industry is one of the accident-prone industries. As the main force of urban construction, our construction companies, while promoting social progress and urban construction, pursue maximizing benefits is the most fundamental goal of our construction companies. However, safety is benefit, safety is our lifeline, and safe production is the best explanation for our country and our people.

"Safety first, prevention first" is my country's production safety policy. Safety management is an important part of enterprise management, which includes the entire process, all aspects and all personnel of the construction site. Therefore, as all of our safety production managers, we must pay close attention to safety production management from the perspective of politics and stability, and with a highly responsible attitude towards the country and the people. Below, I will outline the safety production supervision from several aspects. Key points in management work: When entering the construction site, you must first check whether the software assurance information of the project is complete, whether all safety ledger records are timely, whether there are complete procedures, and whether various safety production responsibility guarantee systems have been established and improved. On-site safety production management network, safety production position responsibility system, etc.

1. Full production responsibility system:

The so-called safety production responsibility system is to clarify the safety responsibilities of leaders at all levels and various types of personnel in production activities in the form of a system. Responsibilities are the most basic system in enterprise safety management and the core of all safety rules and regulations. It mainly includes the following three aspects:

1. The safety responsibilities of leaders at all levels of the enterprise.

As our construction company, it includes the safety production responsibility system for corporate legal persons, managers in charge, chief engineers, project managers, construction captains, safety officers and other management personnel.

2. The safety production responsibilities of all relevant functional departments of the enterprise.

It includes the production department, technical department, mechanical equipment department, materials department, etc. Each functional department is responsible for the safe production of its own department within its own scope of responsibility.

3. Safety responsibilities of front-line workers.

It includes safety production rules and regulations for various types of work: bricklayers, carpenters, steel workers, scaffolders, welders, electricians, crane workers, etc.

The construction site project manager is the first person responsible for project safety production and has overall leadership responsibility for project safety production. After establishing and improving the above safety production responsibility system, the responsibilities must be assigned to specific personnel, and target assessments of the previous stage must be carried out regularly.

2. Whether there is a complete safety production and construction organization design plan at the construction site, and the main contents that must be specified in the plan.

1. Overall design of safety production and construction organization

If a construction site does not have a complete safety production and construction organization design as a guide, it will not be possible to just do whatever comes to mind. Safe production work. Before the start of a project, the production safety technical department must formulate a practical safety construction organization design based on the actual conditions of the project and the specific influencing factors such as hydrology, geology, meteorology, climate, and seasonal changes at the construction site, and submit it to the technical director of the unit It can only be implemented after review and approval. During the construction process, corresponding adjustments and improvements must be made in a timely manner according to the special circumstances of the project.

In addition, for large-scale group projects or key projects with complex structures, the more professional projects mainly include: deep foundation pit support, scaffolding projects with high clearance, formwork support, and hoisting. A special safety construction organization design must be prepared separately for operations, etc., and strict supervision shall be carried out according to the design during the implementation process to prevent emergencies. In 2000, the roof of the studio hall of Nanjing TV Station was not strictly designed for safety production and construction, and the project manager took it lightly. Eventually, the formwork support became unstable and collapsed during the pouring of concrete, causing a serious safety accident.

2. Disclosure of project safety and technical measures

Before the start of the project, the project engineer must inform the project participants of the specific conditions, construction methods and safety technical measures of the sub-projects. The person in charge, foreman and employees conduct safety technical briefings. Before the start of each sub-project, the project engineer must make a safety technical briefing on a single project. The safety briefing should be recorded in a ledger, with signatures from both parties and the date of the briefing.

3. Pre-job training and education for construction personnel:

All personnel participating in construction must undergo three-level safety education before starting work. Special operations personnel must undergo Only after being trained and qualified by the competent department can you start working with a certificate.

With the above software assurance measures in place, in view of the key points of safe production in construction projects, safety production supervision and management personnel must focus on the following hardware aspects to check: whether the erection of the scaffolding meets the specification requirements, and whether the on-site temporary Whether the use of electricity is safe and reliable, whether all types of construction machinery and equipment are sensitive and effective, whether the three safety treasures are used, and whether the four ports and five edges are protected in place. If the above measures are implemented, the four major injury accidents in the construction industry can be effectively prevented. occurrences (falling from heights, hitting objects, electric shock casualties, mechanical damage).

6. What are the safety precautions at the construction site?

Original publisher: Miaomiao 123314

What are the safety hazards at the construction site 1. Civilized construction 1 .On-site fencing (1) Some projects do not set up fencing higher than 2.5m around the construction site in major urban sections. (2) Some construction site fencing materials are not strong, unstable, untidy, and do not meet local aesthetic requirements. 2. Closed management (1) Some construction sites do not have corporate logos at the door. (2) Personnel entering the construction site do not wear complete work cards. 3. Construction site (1) The ground at most construction sites has not been hardened. (2) There is no drainage measure or the drainage is not smooth. (3) The mud used in most construction sites has not been subjected to sedimentation treatment. (4) There is no smoking area on the construction site, so you can smoke at will. (5) There is no greening arrangement in warm seasons. 4. Material stacking (1) Building materials, components and tools are not stacked according to the general plan. (2) The name, variety, and specifications of the standard brand materials of the material pile are incomplete. (3) Materials are not stacked neatly. (4) Failure to clear the finished materials. 5. On-site fire prevention (1) There is no fire protection measure system or fire extinguishing equipment. (2) Fire extinguishing equipment is unreasonably equipped. (3) If open flames are required on site, there will be no fire approval procedures or fire supervision. 6. Comprehensive management of public security (1) There are no study or entertainment places for workers in the living area. (2) The responsibilities of the public security system are not divided among individuals. (3) Public security precautions are insufficient and theft occurs. 7. Construction site signs (1) The signs are not standardized and neat, and the content is incomplete. (2) Safety slogans are incomplete and not eye-catching. (3) There is no "seven boards and two pictures" facility. 8. Living facilities (1) There are no toilets or the toilets do not meet the hygiene requirements (flush toilets have not been changed). (2) The hygiene of the canteen is not up to standard. (3) There is no shower room or the shower room does not meet the requirements. (4) There are no treatment measures for domestic waste. 9. Health care first aid (1) There is no health care medical kit. (2) There are no first aid measures and first aid equipment. (3) There are no trained first aid personnel on duty. (4) No publicity and education on health and disease prevention has been carried out. 10. Community services (1) No dust and noise prevention measures. (2)

7. What are the safety precautions for construction site

Original publisher: 15350881288

Precautions for entering the construction site 1. Personnel entering the construction site must Wear a safety helmet, and those working in the air and at high altitudes must wear safety belts. 2. During the construction process, construction personnel must carefully clean up after completion of construction every day to ensure that the work is completed, materials are clean, and the site is clean. 3. If any damage is caused to other people's property due to illegal operation, the full price will be compensated. 4. Take effective measures to control the environmental pollution and harm caused by various dust, waste gas, waste water, solid waste, noise and vibration at the construction site.

Construction safety precautions 1. Construction personnel should undergo necessary business training and have professional work certificates before they can start operations. They should master the construction safety techniques they should know and know. They should wear work clothes before construction before carrying out construction operations. 2. Fireworks are strictly prohibited at the construction site. Corresponding fire prevention measures must be taken and necessary fire-fighting equipment and other fire-fighting equipment must be equipped. Inflammable and explosive items are not allowed to be mixed at the construction site. 3. Operators must wear seat belts and must wear safety helmets when working on high and low spans or three-dimensional intersections. 4. Wearing slippers, high heels, bare feet or shirtless are not allowed to enter the construction site. 5. You are not allowed to work after drinking. 6. It is not allowed to dismantle safety facilities and installation devices without the approval of relevant personnel. 5. During construction, relevant safety technologies, such as high-altitude operations, vertical transportation, health protection, etc., should be strictly implemented in accordance with the "Technical Regulations for Construction Safety Engineering" issued by the State Council and other relevant national special regulations. Safe and civilized construction (1) Safe construction The idea of ??"safety first, prevention first" should be established to make all employees aware of the importance of safe production. 1. Construction workers should be familiar with the safety technical operating procedures of this type of work, use personal protective equipment correctly, and take safety protection measures. 2. Strengthen the management of electrical welding, oxygen, acetylene and other flammable and explosive items to prevent fire accidents. 3. Use

8. Construction safety education content

Safety production is an eternal theme for construction enterprises. With the rapid development of our country’s economy, our country’s socialist construction undertaking is also is booming, but with it comes the safety production problems caused by construction. At present, the safety production situation at construction sites is very serious. The safety production issues in construction construction have always been the top priority of the national work safety supervision and management. .

The three key points of safety production management and control at construction sites are unsafe behaviors of people, unsafe conditions of objects, and unsafe factors and management defects in the working environment. According to statistical analysis, 80% of casualties in the national construction industry More than % are caused by unsafe behaviors and management defects such as illegal command, illegal operations, violation of labor disciplines, etc. Therefore, how to improve the safety quality and operational skills of workers, standardize the safety behavior of workers, and ultimately achieve safe and standardized operations , standardized construction is an important issue before us, and these can be achieved through the education and training of operating personnel. At present, the safety production education and training at the construction sites of my country's construction companies mainly targets two groups of people: construction company employees and migrant workers.

As employees of construction companies, on the one hand, due to their high level of knowledge and strong receptivity, on the other hand, due to the relatively fixed personnel, most of them are construction managers with rich construction experience, and in accordance with relevant national laws All employees can receive safety production education and training at all levels and undergo assessments on time. Therefore, they have a high awareness of production safety and can consciously abide by safety production disciplines at construction sites. They are the main force in safety production work at construction sites. However, as another group of people at the construction site: migrant workers, they are a weak link in the current safety production education and training work of construction enterprises in my country. There are many reasons for this situation. First of all, migrant workers have low cultural knowledge levels and poor acceptance ability. Secondly, the mobility of migrant workers is relatively high. Thirdly, some construction companies and professional (labor service) contracting teams are driven by interests, one-sidedly pursue economic benefits, have weak safety awareness, and have relaxed safety management, especially for employees. The constant investment in safety education and training, both financially and in terms of time, has resulted in a low level of safety skills among workers. This is especially true for migrant workers who are new to the workplace or who have changed types of work. They go directly to work without receiving any safety education. Special workers Work without a certificate, do not understand the operating procedures of this type of work, and do not master safety technical standards.

These people have no awareness of safety protection and lack the ability to protect themselves. Some migrant workers died of work-related injuries within a few days of going to work. Due to the existence of the above current situations, casualties and accidents occur frequently in construction companies.

In view of these current situations and combined with my own work experience, here are some of my views on safety production education at construction sites. 1. Strengthen safety production education and training in accordance with the law and improve the safety production awareness of construction site workers. my country’s safety production management policy is “safety first, prevention first”.

Safety first means that safety work should be given top priority in all production activities; prevention first means that before all production activities begin, based on the characteristics of the production activities, scientific measures should be taken to control the production factors. Management methods and measures can effectively control the development and expansion of unsafe factors, nip accidents in the bud, and nip them in the bud. Safety production education and training must be based on "safety first, prevention first", so that the training of workers on safety production knowledge and skills can be implemented effectively.

Article 21 of the "Work Safety Law" stipulates: "Production and business units shall provide education and training on production safety to employees to ensure that employees have necessary production safety knowledge and are familiar with relevant production safety regulations Systems and safe operating procedures, and master the safe operating skills of this position. Employees who have not been educated and trained in safety production are not allowed to work.”

Article 23 states: “Workers of production and operation units. Special operation personnel must undergo special safety operation training in accordance with relevant national regulations and obtain a special operation qualification certificate before they can work. "Article 46 of the "Construction Law" stipulates: "Construction enterprises shall establish and improve labor safety production education and training systems. , Strengthen education and training for employees in production safety. Personnel who have not received education and training in production safety are not allowed to work. ”

In order to strengthen safety education and training for employees in construction enterprises, the Ministry of Construction issued the "Construction Enterprises". "Interim Provisions on Employee Safety Training and Education", which proposes specific implementation measures for safety education and training for construction industry enterprises. Construction enterprises must strictly implement relevant laws and regulations and provide workers with safety education and training in strict accordance with relevant regulations. At the same time, safety production authorities at all levels must strictly enforce the law and strengthen safety education and training for construction enterprises, especially for migrant workers. Only by supervising training and truly complying with laws and strictly enforcing the law can we ensure the effectiveness of safety education and training work in construction enterprises and achieve safe production.

2 Establish and improve the safety production training and education system, and strengthen the implementation of the safety production training and education system 2.1 Establish and improve the safety education and training responsibility system, clarify safety education responsibilities, and implement the safety education and training system. First of all, it is necessary to clarify the responsibilities of education and training at all levels on the construction site, establish the person responsible for the implementation of safety education and training, and at the same time clarify the main recipients of on-site safety education-all personnel at the construction site; secondly, it is necessary to strengthen the supervision and assessment of the responsible subjects, and conduct the assessment Unqualified responsible persons should be replaced or dismissed; thirdly, attention should be paid to cultivating the professional quality and sense of responsibility of those responsible for implementing safety education.

2.2 Establish and improve the three-level safety education and training system and safety technology communication degree, clarify the safety education content and hours, strengthen the education and training of operators, and ensure that every new worker enters (or transfers) type of work) and strictly follow the relevant requirements in the "Interim Provisions on Safety Training and Education for Employees in Construction Enterprises" to carry out safety education and training work and safety technology briefing work at each level, so as to truly achieve training first and employment later. 2.3 Implement a safety education registration system and assessment system, establish a safety education and training information card for each worker, and implement a one-person-one-card system, which mainly includes required training content, hours, trainers, time, location, and assessment results, etc.

Yes.