Summary of monthly supervision of safety production

Model essay on monthly supervision work of production safety

Time flies, years have passed, and a period of work has ended. Looking back on the work during this period, there must be many difficulties and hardships, which means that we are ready to start writing the work summary again. How to write a work summary to give full play to it? The following is a summary model essay on monthly supervision of production safety that I have compiled for you. You are welcome to learn from it, and I hope it will help you.

summary of monthly supervision of production safety 1

According to the Interim Provisions on the Investigation, Management, Supervision and Management of Hidden Dangers of Production Safety Accidents in Fujian Province, our company timely organized various departments to conduct investigation of production safety accidents on the construction site of each bid section of Shengshi Xingcheng, so as to strengthen production safety; Under the leadership of the company and with the close cooperation of the construction unit, the safety work is strictly supervised and controlled from beginning to end in accordance with the working idea of "strict, detailed and practical", ensuring that the safety work is always under control.

according to the safety work goal of "putting an end to personal death accidents, major equipment safety accidents and other major accidents", the supervision department will strengthen measures and pay close attention to implementation while implementing the policy of "safety first, prevention first". Our approach is as follows:

1. The supervision department carefully examines

the safety management network of each construction unit and the various "safety management measures" and "safety management systems" formulated, so that each construction operation link has a relatively complete construction work instruction including specific safety measures, operating procedures and methods.

Second, improve the safety awareness of workers involved in the construction, especially migrant workers

Intensify the publicity of safety education on "Three Preventions" and "Three Harms", and at the same time require a monthly safety inspection according to the actual project.

III. Seriously organize technical disclosure

The disclosure should not only be technical, but also safety, ensure that the disclosure content is practical and targeted, and put the safety responsibility on every construction worker.

iv. the director should pay special attention to safety at the weekly on-site meeting, so as to strengthen the safety awareness of the personnel at all levels of the participating units and urge the implementation of safety precautions.

The problems found in the construction shall be "three-no-pass" and rectified in time to ensure the construction safety; At the same time, pay close attention to the implementation of safety rules and regulations, increase the investment of management personnel and construction machines, and ensure that full-time security officers are in place and take responsibility effectively; Carefully check and control the instruments and tools, and thoroughly remove the instruments and tools that are unqualified or do not meet the specification requirements from the construction site. At the same time, the supervisors stationed in various construction teams are required to strengthen the inspection and supervision of safety work, stop hidden dangers or violations in time, and urge them to make immediate rectification.

5. Conduct a monthly safety inspection in strict accordance with the Safety Inspection Scoring Form formulated by the Ministry of Engineering and Construction.

the supervision department has followed up the problems and rectification in the safety inspection to ensure that there are no dead ends, hidden dangers and regrets in the safety work. Through the review, acceptance and signing of the rectification of the construction unit, the safety work forms a closed-loop control. At the same time, understand and master the ideological status and safety trends of construction personnel, formulate improvement measures in time, prevent all kinds of accidents, and gradually improve safety management.

for the deficiencies existing in the inspection, each bid section made a serious summary and immediately took effective rectification measures. Through the safety inspection, each bid section learned from each other and learned from each other's strengths, which raised the safety work to a new level.

VI. In view of the characteristics of many lines and long lines in power engineering, the supervision department requires on-site supervisors to conduct detailed safety inspections on the operating points every day.

key inspections:

1. the full-time security personnel of the construction unit are in place and perform their duties;

2. Implementation of technical measures for site construction;

3, the implementation of construction safety measures;

4, the construction site layout and the use of instruments, etc.

through the supervision and inspection in the above aspects, ensure that all rules and regulations and safety measures are put in place.

VII. At present, all blocks are in the main construction stage, and the supervision department mainly requires the supervisors of all blocks to carefully review the safety technical measures;

strictly implement the construction plan, and earnestly implement various rules and regulations; Prevent some habitual illegal operations and put an end to personal death accidents, major equipment safety accidents and other major accidents.

Safety management is a hard process, and we should make further progress. Honor belongs to the past, and safety work has only a starting point, no end point, and we can't relax at any time. We believe that through the concerted efforts of the construction, construction and supervision units, the safety work goal of Shengshi Xingcheng will be realized. Summary of supervision work of safety production month 2

According to the arrangement of "Safety Production Month" with the theme of "strengthening safety foundation and promoting safety development" in Hangzhou, the supervision department took active actions, held many safety production meetings attended by all supervisors from June 1, set up a leading group, worked out the work plan for June, and increased the frequency of safety inspection. Since June, the safety production of Wuling underground project has changed greatly. The phenomenon of illegal operation has been significantly reduced, and no safety accident has occurred. The consciousness of "everyone cares about safety" and "safety is related to the overall situation" has been established among all participating units and all employees. The activities of "Safety Production Month" carried out by the supervision department are summarized as follows:

1. Leaders attach importance to and improve the organization

Since the first half of this year, there have been many serious safety accidents in the whole country, and there have also been many accidents in the field of engineering construction, such as equipment hoisting, scaffolding collapse and electric shock. Wuling underground project has many hoisting operations, narrow construction site, deep foundation pit excavation, complex structure, and many safety hazards left by various interchange operations. Especially, the process conversion makes workers go in and out frequently, and new workers are often unfamiliar with the environment, with poor safety awareness. Therefore, the leaders of supervision department deeply realize that it is a very important and urgent task for us to use Wuling underground project to carry out safety production month activities and promote the overall improvement of safety management. Therefore, at the beginning of the activity, a leading group was set up, with director Wei Liu as the team leader, director representative Zheng Ke and branch secretary Xiao Jianming as the deputy team leader, and safety supervision engineer and the team leader of each bid section as the team members. Work was quickly carried out to comprehensively promote the Wuling underground engineering safety month activity in June.

II. Perfecting the system and fulfilling the responsibilities

When undertaking the supervision task, the supervision department has compiled management documents such as Safety Supervision Construction Organization Design, Detailed Rules for Safety Supervision of Sectional Projects with Greater Danger, Key Points for Supervision and Control of Safety Side Stations, and Regulations for the Management of Dredger Transportation, etc. in view of the reality of Wuling underground project. Then, according to the new situation of the project, the special management systems such as dust suppression, typhoon prevention, flood prevention, heatstroke prevention and cooling, lightning protection and fire prevention were supplemented and improved, and the safety management responsibilities of the leadership of the supervision department, full-time safety supervision engineers, the team leader of the tender section and supervisors at all levels were clarified, and the supervision teams of each tender section were required to hold a weekly safety production situation analysis meeting to sort out the potential safety hazards around them and formulate rectification measures. The director's office holds a safety production management meeting every half month and conducts a comprehensive inspection of safety production every week; The safety supervision engineer and the team leader of the Bid Section shall conduct safety inspections within the jurisdiction every day, and impose penalties on violations until rectification.

III. Full coverage and no dead ends

In the final analysis, safety management is the safety management of "people", "machines", "things", "materials" and "environment". The Director's Office fully mobilizes and improves the enthusiasm of safety management personnel of supervision and construction units by using the established Safety Management Assessment and Punishment Measures, and strives to achieve:

1. The supervision team leader of each bid section will attend the safety situation analysis meeting in his work area twice a week, attend and regularly check the safety education and training activities of new workers entering the site, and perform the inspection and signing procedures.

2. Special types of work and personnel insurance are fully covered. Since the launch of the Safety Month, the Director General's Office has organized supervisors to go deep into the training, education and inspection of special operators in the project department according to the requirements of the detailed rules for standardization of safety production promoted by the transportation construction department, and has adopted the methods of certificate inspection → classified registration → assessment of basic business knowledge → issuance of certificates → daily inspection → regular combing to maintain dynamic management of special operators. At the same time, urge the project department to handle personal injury accident insurance for special operations personnel.

3. The equipment inspection is fully covered. The construction project department is required to establish "one machine and one file" for special equipment, and put it into operation after the inspection is qualified. Large equipment and small machines and tools are set up management ledgers according to the requirements of the municipal quality supervision station, and maintenance records are made. According to the characteristics of heavy-duty muck trucks, which are dangerous, mobile and temporary, the project department is required to designate professional engineers to accurately grasp the equipment in and out, regularly review and report, check the qualifications of personnel using the equipment, and resolutely. Summary of supervision work of safety production month 3

1. Overview of safety work

The supervision work was carried out around the requirements of standardization construction and the goal of creating a "safe construction site" for the extension project of Suyuzhang Highway, 228 provincial highway. During the "Safety Production Month" activity in June, the Director's Office implemented relevant supervision work.

II. Supervision work

The first level refers to the issuance of the "Notice on Launching the 2xx' Safe Production Month'", and the Office of the Director General responded positively. Focusing on the theme of "strengthening red line awareness and promoting safe development", we carried out various activities, earnestly performed our duties, and took the first-class inspection as an opportunity to strictly monitor the site to ensure the safety of the construction site under control. In the safety month activities, the director's office mainly did the following work:

(1) set up an activity group, formulate an activity plan, and strengthen the sense of responsibility of supervisors

1. set up a leading group for safety month activities, formulate an activity plan, and carry out comprehensive mobilization. In this safety month activity, the director's office first set up a safety month activity leading group, headed by the director, and formulated a targeted activity plan according to the actual situation of the project; Organize everyone to watch the "Safety Production Warning Film" in mid-June; Conduct a comprehensive mobilization within the director's office, requiring all supervisors to actively participate in the safety month activities with a serious and responsible attitude.

2. The special work of the Director's Office has been arranged in the safety month activities. The key points of the work are:

1) Examining and approving the implementation plan of the "safety month" activities reported by various construction units.

2) check the work contents of each stage.

(2) Taking the safety production month as a platform and the first-level inspection as an opportunity, the Director's Office seized this opportunity, and urged the construction unit to do relevant work while doing a good job of self-examination and self-correction.

1. Supervise and inspect the safety month activities of the construction party, and require the construction unit to actively participate in this month's safety month activities, carry out various publicity activities, create the atmosphere of safety month activities, and do a good job in safety education and three-level disclosure for workers to strengthen their safety awareness. According to statistics, in this safety month activity, slogans (banners) were hung, posters were posted, safety production warning films were watched, and publicity materials were distributed.

2. Combined with the opportunity of the first-class inspection, the supervisor urged the construction party to do a good job of self-examination and self-correction, and timely requested rectification for some irregularities, and at the same time required civilized construction and fully prepared for the inspection. For example, in terms of site border protection, temporary electricity utilization, safe and civilized construction in the site, and the arrangement of indoor information, we should do all the work as well as possible.

3. In terms of special work, organize the Project Department of Bid 5 ~ 8 to observe the demonstration site of "model section" of pile cap construction, praise the well-done bid section, and ask the construction team that fails to do it to suspend construction for rectification. The special activity of "Standardizing the Management of Pile Foundation Construction Site" requires all construction units to rectify and implement the situation that the site safety management of each construction unit is not in place.

4. the director's office shall check the information update of the personnel management and machinery management of the construction unit, such as the registration of the entry and exit time of "one person, one file" and "one machine, one file" and the collection of information and materials.

5. The Director General's Office will strengthen the on-site construction inspection, issue safety supervision instructions for potential safety hazards, and require all construction units to rectify in place in time. The details are as follows (in terms of safety supervision instructions): Three safety supervision instructions were issued to Bid Section 5, of which two were about irregular temporary electricity consumption and one was about incomplete indoor information, requiring the construction unit to rectify in time; Two safety supervision instructions were issued to Bid Section 6, both of which were irregular in temporary power consumption. The phenomenon of "two machines and one brake" was found many times on site, requiring the construction unit to rectify it in time; Three safety supervision instructions were issued for Bid 7, of which two were about irregular temporary electricity consumption and one was about incomplete indoor information, requiring the construction unit to rectify in time; Two safety supervision instructions were issued for Bid Section 8, one for irregular temporary electricity consumption and Q ramp construction area, and no closed enclosure was set at the intersection with the old road, and one for incomplete information on Ping An wages, requiring the construction unit to rectify in time.

6. Supervise the implementation of the emergency team of the construction unit and conduct emergency drills. Such as: fire emergency rescue drills, food poisoning emergency rescue drills, electric shock emergency rescue drills and so on. The construction unit is required to complete the education and training of emergency team personnel in time, and ensure that the personnel, materials and plans are in place.

7. Adhere to the regular meeting system of the project, comment on the safety situation last week at the regular meeting, point out the problems existing in the field construction and management process, urge the construction party to rectify in place, and put forward requirements for the safety next week, so as to reduce and put an end to violations.

on August and June 14th, organize the Project Department of Bid 5~8 to visit and study the pier construction and support erection of Bid 1 ~ 3. To ensure that the 5~8 bid under the jurisdiction of the Director's Office has a perceptual understanding of the standardization and standardization of support erection during pier construction, which will play a certain guiding role in the safe production of pier construction in the future.

9. according to the progress of the project, on June 16th, the director's office and the technical service unit * * * made disclosure on pier construction technology and safety for the construction unit of bid 5 ~ 8. Remind the project department of matters needing attention in pier construction, and earnestly implement the relevant safety measures to create a "safe construction site".

1. In this activity, the implementation plan of Safety Month was publicized within the supervision team. The special activity was to organize all supervisors to watch the "Safety Production Warning Film" on June 17th. It involves: electric shock accident, bracket collapse, lifting rollover and so on. Through the watch of the warning film, the supervisor can know the dangerous source at the scene and remind the construction unit to rectify immediately once the potential safety hazard appears, and always pay attention to the safety production workers ideologically.