How to set up a beacon router?

A router is a hardware device that connects two or more networks. It acts as a gateway between networks. It is a dedicated intelligent network device that reads the address in each packet and then decides how to transmit it. The following is the setting method of the beacon router I shared. Let's have a look!

Setting method of beacon router:

Home network environment wiring:

1, a modem: a modem)-router wan port; Router LAN port-computer.

2. No modem: network cable-router wan port; Router LAN port-computer.

Computer enters the router:

1, computer ip and dns settings are automatically obtained.

2. Open a browser, enter 192. 168. 1 in the address bar (this is the address of the general router or check the login information on the back of the router), and enter the route-enter the user name and password (the default is usually admin).

Set up router dialing:

1. Select PPPoE dial-up (some are ADSL dial-up) in the setup wizard, follow the prompts, enter the user name and password for accessing the Internet, and save.

2. In the network parameters-WAN settings, select normal mode, and in the three options of connection, select PPPoE dialing.

The following are the options for automatically connecting, saving and quitting.

Extension: How to set the password of the router

Methods/steps

1. Right-click My Network Places and select Properties.

2. Right-click the Local Area Connection and select Properties.

3. Click Internet Protocol with the left mouse button, and then click Properties.

4. Click "Use the following IP address" with the left mouse button and enter the address as shown. DNS can be set according to the local DNS.

5. Click OK with the left mouse button.

6. Click "IE Browser" with the left mouse button.

7. Enter "Account Password" at the address "192. 168. 1" and click "OK" with the left mouse button.

8. Click "System Tools" with the left mouse button and select "Modify Login Password"

9. Enter the original "account password", enter the new "account password" and click "Save".

More knowledge

Excuse me, how to set the wifi password of the router so as not to be cracked?

A: To ensure that the router's wifi password is not cracked, we need to pay attention to the following issues:

1. Turn off WPS on the router.

2. Set a secure wifi password.

3. Don't use surfing software.

4. Set wireless MAC address filtering.

1. Turn off WPS on the router.

Some routers have WPS function, which is turned on by default. If the WPS function is turned on on the router, the wireless device can connect to the wifi signal through the WPS PIN code, that is, it is not necessary to know the wifi password, but only know the PIN code.

Moreover, this PIN code is an 8-digit pure number, which is very easy to be cracked. Therefore, if your wireless router supports WPS function, it is recommended to turn it off.

Second, set a secure wifi password.

1, the security mode of wifi, please choose WPA2-PSK or WPA2-PSK mixed encryption. WPA2 encryption is the most secure. Never choose WEP encryption, it is easy to be cracked.

Tips:

The situation is different for different wireless routers. At present, the default encryption of wifi in many routers is WPA2-PSK or WPA2-PSK. Some old wireless routers require users to manually select the encryption method. Under the router wireless settings option, please pay attention to the encryption method.

2. The password of wireless wifi is recommended to be set in combination of uppercase letters+lowercase letters+symbols+numbers, and the password length is greater than 8 digits. There is no way to crack the wifi password set in this way.

Third, don't use surfing software.

Many users like to install a master key or similar surfing software on their mobile phones, and want to crack other people's wifi passwords and surf the Internet for free.

What needs to be explained here is that this kind of software, the master key, is essentially not to crack the wifi password, but to share the wifi password. In other words, when you install the master key software on your mobile phone, your wifi password will be shared when your mobile phone is connected to the Internet with wifi signal.

When someone else's mobile phone also has a master key installed, and the other person is near your home, you can use your shared password to directly connect to your wifi to surf the Internet.

Therefore, the best way to prevent software such as the master key from surfing the Internet is to ensure that it is not used on wireless devices connected to its own wifi, thus preventing the master key from surfing the Internet.

Fourth, set wireless MAC address filtering.

Setting wireless MAC address filtering on the router is the safest way to prevent friction with the network. After successfully setting wireless MAC address filtering, only allowed mobile phones/laptops can connect to the router's wifi to surf the Internet. Other wireless devices can't connect to the router's wifi signal to surf the Internet.

The MAC address refers to an identification of the network card, which is equivalent to our ID number and is unique.

The principle of wireless MAC address filtering is to add the MAC addresses of wireless network cards of mobile phones, notebooks and tablets that allow Internet access. Only wireless devices with added MAC addresses can connect to the router's wifi for Internet access. Other wireless devices can't connect, even if the other party knows the wifi password, they can't connect to wifi to surf the Internet.