Annual fire safety assessment report

The annual fire safety assessment report involves an intervention process and a monitoring process. The ultimate goal of evaluation is to understand the effectiveness of the work process. There are many methods of assessment, and it is very important to learn to write assessment reports. The following is the annual fire safety assessment report.

Annual fire safety assessment report 1 Our company conducts fire safety assessment on XXXXXX () according to fire laws and regulations and fire technical standards. Take the principles of justice, fairness and openness, and the evaluation results are true and effective.

First, the general situation of the unit and the basic situation of fire safety:

XXXXXXXX is located in XXXXXXXX, Building X, the main building, with an area of X square meters and a building area of X square meters. The main building has X floors underground and X floors above ground. The building is equipped with indoor and outdoor fire hydrant systems, which automatically

Automatic sprinkler system, automatic fire alarm system, smoke control system. It passed the fire protection design audit of public security fire control institutions on, and passed the fire protection acceptance of public security fire control institutions on.

Pass the fire safety inspection before the opening of public security fire control institutions and put them into use.

Second, the evaluation content:

1, XXXXXX fire protection legal situation;

2, formulate and implement the fire safety system, fire safety operation procedures, fire fighting and emergency evacuation plan;

3. XXXXX fire safety administrator, full-time (part-time) fire administrator and automatic fire control system operator shall organize fire inspection, fire patrol and fire hazard rectification;

4.XXXXX employees' fire safety training, knowledge of "knowing three things at once", fire safety publicity, and organizing regular fire drills;

5, fire control facilities, equipment and fire safety signs configuration and good and effective situation, fire control room personnel on duty and automatic fire control system operators show certificates;

6, electrical products, gas appliances installation, use and wiring, pipeline laying and maintenance;

7. Clear the passage, exit and fire truck passage, and keep the fire partition, fire spacing, smoke partition, refuge floor (room) and fire truck climbing operation area effective;

8, indoor and outdoor decoration, the use of external wall insulation materials, management of inflammable and explosive dangerous goods;

9, according to the law to establish a full-time fire brigade and equipped with equipment, with fire fighting ability.

10, administrative punishment and bad fire safety behavior by fire control institutions of public security organs, and rectification of problems found in supervision and inspection;

165438+

12, the unit combined with the actual situation to strengthen civil air defense, physical defense, technical defense and other fire prevention measures;

13, fire situation in unit year.

Third, the existing problems:

1. Spot check employees' knowledge of "knowing one and knowing three", and some employees are unfamiliar with knowledge.

2. There are few emergency supplies for safe evacuation, and there are no flashlights and gas masks.

Four. Appraisal conclusion:

okay

Five, fire safety countermeasures, measures and suggestions:

1, strengthen staff publicity and education, and strengthen training for employees who are not familiar with knowledge.

2. Add flashlights, anti-virus and anti-smoke masks.

Annual fire safety assessment report 2 1. In terms of radiation safety, operation and maintenance of protective facilities,

Our company's * line device can be regularly inspected and monitored by the Municipal Environmental Protection Bureau, and the inspection frequency is generally once a year, and the inspection results are filed by the company's security department; Our company's operators are responsible for daily maintenance and make handover records, and use * line devices to maintain safety devices.

As for the maintenance of the main line device, the electrician of the company is generally responsible for the maintenance of the conventional electrical circuit, and the faults in the fuselage are sent to the designated unit for maintenance. * In 2009, the line devices operated normally, and no equipment damage accident occurred.

Second, in terms of radiation safety and protection system and implementation.

Our company set up a leading group of "radiation protection management" headed by a legal representative, and at the same time formulated a strict radiation safety management system, and put this safety management on the agenda of the company's re-networking, so that the radiation protection management was controlled.

The company stipulates that all personnel engaged in radiation work should work in strict accordance with the "operating rules", and it is required to wear personal dosimeter for operation and do personal protection to ensure safety in production. Until 2009, there was no overexposure and exposure accident.

Three, in radiation accidents and emergencies.

According to the safety and protection regulations of mainline equipment, the company has taken various preventive measures. In view of the possible radiation accidents of the company, the company has formulated relevant radiation accidents and emergency network schemes to ensure the safety and security in parallel.

Fourth, in terms of file management.

Our company's' convention' is:

1. Establish the technical archives of X-ray equipment, formulate the use registration system, and indicate the parameters of X-ray technical archives in tabular form;

2. Establish a registration system for the use of * line equipment, record the account, and conduct registration inspection when using * line equipment to ensure that the accounts are consistent.

3. Supervise the users of * line equipment to fill in the use records and do not check them regularly;

4. Register the supervision and inspection of the environmental protection department every time, and file the environmental assessment report (including approval), monitoring report and other technical files of the environmental protection department.

Annual fire safety assessment report 3 I. Basic information:

The project address of this Juyi Mansion is located at xx Village 107 National Road, xx Town, xx City. It is fully developed by xx Juyi Real Estate Development Co., Ltd. and contracted by Zhanjiang Fourth Construction Engineering Co., Ltd.

On-site supervision of xx Construction Supervision Co., Ltd., with a total construction area of 27,607.8 square meters, basement 1 floor, ground 1 1 floor, ***6 stairs (1. -6 stairs), and the podium of the 365,438+0 shop on the first floor.

The Juyi Mansion project was filed in the main hall brigade of xx Public Security Fire Bureau in April, 20xx.

The fire protection works of this project include: indoor fire hydrant system, automatic sprinkler system and automatic fire alarm system.

Two. Project overview:

The roof of this project is equipped with a fire-fighting supplementary pool, with an effective volume greater than12m3 and an effective supply time of not less than10min.

1. The basement has 1 fire pump room and 1 fire pool with a capacity of 2 10 cubic meter. There are 2 fire hydrant pumps and 2 pressure stabilizing pumps, with a lift of 80m and a flow rate of 15l/s, which is used for the management of the community ring network (1).

2. The first floor is equipped with 1 fire control center, equipped with automatic fire alarm system equipment (including: 1 alarm controller, 1 linkage control cabinet, 1 fire broadcast system, 1 fire communication system, 1 water spray fire control system). )

Three. Construction process.

Our company has established the quality responsibility system for managers of all departments and levels, defined their respective quality responsibilities, and established a perfect project self-inspection system, with clear division of labor and responsibility to people.

Strictly control the construction procedure of the whole project, and conduct strict technical disclosure before each sub-project starts, and conduct inspection and acceptance according to the requirements of technical disclosure and inspection and evaluation standards, so as to achieve tracking synchronization, review all technical projects, and pass the self-inspection.

Report to the quality supervision station, the construction unit and the supervision unit for parallel acceptance, and then proceed to the next working procedure after meeting the design requirements and acceptance specifications. All kinds of materials used on site are required to meet the requirements of qualification, and unqualified and messy products will be rejected.