Mobile phone*#07#

*#8999*8378# Test mode *#8999*8376263# Check the hardware H/W, software S/W version and the time and date of the last software refresh. *#8888# View the hardware version in detail *#9999# View the software version in detail *#06# Display IMEI #*2787# Turn on or off temperature monitoring, after entering the command, the screen will display CRTP ON means on, CRTP OFF means off #*3370# Open Or turn off Enhanced Full Rate (enhanced full-speed encoding), an enhanced technology that provides better voice quality for cellular systems. #*4700# Turn on or off Half Rate (half rate encoding), which can use spectrum more efficiently, thereby doubling the capacity of the cellular network. #*7693# Turn sleep mode on or off. #*8462# Display sleep time. *2767*927# Wap reset. *2767*86927# GPRS automatic setting *2767*86667# MMS automatic setting*#8999*3825523# (ETALLCD) External LCD external screen brightness adjustment *2767*2878# Reset the current settings of the mobile phone *2767*3855# Mobile phone EEPROM total reset (this function should be used with caution! It will format the phone book, so make a backup of the phone book before using it).

*#06#: Display International Mobile Equipment Identity IMEI code #*1200#: AFC DAC Val #*1300#: IMEI #*1400#: IMSI #*5111#: status #*2565#: (BLOK) no blocking general defense #*3353#: (DEKE) general defense code erased #*7222#: (SCAC) - Class C GSM #*7252#: (SCLB) Class B GPRS #*7271#: (SCS1) Multi slot Class 1 GPRS #* 7274#: (SCS4) Multi Slot Class 4 GPRS #*2787#: CRTP on/off forced detection of battery temperature on/off #*3737#: status, AFC val #*5132#: (L1DA) status #*5133#: (L1DE) status #*7288#: (SATT) GPRS attached/detached GPRS attached/detached #*7287#: (SATS) GPRS att/det status GPRS attached status @ #*7666#: (RNMO) status #*7284# (SBTG) Set Class B to GPRS #*2256#: (BALO) Calibr.-info #*2286#: (BATA) Databattery battery data #*7352#: BVMC set 0h debug battery #*2558#: Time ON for debug battery #*2474#: cmd set debug battery #*2527#: GPRS switching 4, 8, 9, 10 #*2679#: Copycat feature ON/OFF #*3940#: ext.looptest 9600bps #*3941#: ext .looptest 115200bps #*4263#: (HAND) Handsfree mode ON/OFF Handsfree function on/off #*4700#: (HR00) Half Rate on/off The default is on. It is recommended to turn it on to increase the continuous talk time of the mobile phone. #*3370#: (EFR0) EFT on/off Enhanced Full Rate on/off. The default is on, and it is recommended to turn it on to improve call sound quality.

#*7462#: (SIMA) SIM phase SIM card function type #*7983#: Voltage/Freq ON/OFF #*7986#: Voltage ON/OFF #*7693#: (SMXD) Sleep Act/Deact power saving mode switch #*8462#：Sleeptime status Power saving mode status #*7683#: (SMVE) Sleep variable #*5176#: (L1PN) L1 sleep status #*7632#: (SMDB) Sleep mode debug Release power saving mode #*7673 #: (SMRE) Sleep mode reset Power saving mode reset #*8466#: old time - sleep, SMReq, awake #*2255#: call failed mode... #*5187#: (L1TR) L1C2G trace #*5376 #：------------------ reboot? #*6837#：Official Software Version Official software version? #*7524#：KCGPRS #*7562#：LOCI GPRS #*7638 #: RLC ON/OFF #*2337#: Parmanent Registration Beep #*2834#: Audio Path: Turn on the audio path #*3270#: (DCS0) DCS support on/off supports 1800M on/off #*3282#: Data on /off #*3476#: EGSM on/off #*3676#: Flash volume formatted: All phone books need to be deleted after use #*4674#: IMSI #*4760#: GSM, active/deactive #*5171#: (L1P1 ) status #*5172#：L1P2 #*5173#：L1P3 #*7326#：Accessory：Vibrator #*7762#: (SSMB) SMS Bearer CS, active/deactive #*8465#: (TINL) Time in L1 #* 9795#: Wtls key Reset #*2252#: (CALC) Current CAL #*2836#: AVDDSS Management: ON/OFF #*3877#: Dump of SPY trace #*2677#: (AMRS) AMR status: none/Half Rate/Full Rate *#2255#: (CALL) Call Log: Display call log *#8999*324#: (DAG) Netmon network reception status*#8999*377#: (ERR) Error Log Mobile phone error record*#8999 *636#: (MEM) memory status mobile phone memory status *#8999*8378#: (TEST) Test Mode test mode displays version (hardware version, software version, IMEI), hardware test (vibration test, audio settings (speaker gain) , microphone gain, song gain, speaker volume (normal, mobile phone, hands-free, headset), key tone (normal, mobile phone, hands-free, headset), tone calibration gain, speaker volume (headphone)), battery information), lock status , SIM card information (SST, CPHS, phone

Phonebook, exit, SMS, language, IMSI) and product information. *#4777*8665# (GPRS*TOOL): GPRS settings *#8999*523# (LCD) Main LCD Brightness: Internal main screen brightness adjustment *#8999*3825523# (ETALLCD) External LCD: External screen brightness adjustment*# 9999# Firmware version: Software version*#8999*8376263# Firmware detail: Details of all software versions*#8888# H/W version: Display hardware version*#8377466# (VERSHNO): S/W amp; H/W version # *6420# (MIC0) MIC off #*6421# (MIC1) MIC on #*6422# (MICA) MIC dep Rxdata #*6428# (MICT) MIC measurement #*3230# TRACE, enable #*3231# DCD, enable #*3232# Show DCD/TRACE mode DCD/TRACE status#7263867# RAMDUMP on/off*#7465625# All lock status: Mobile phone lock status＊＊＊The following commands are not recommended, otherwise you need to unlock the mobile phone.

*7465625*638#: (SIMLOCK*NET) Network Lock enable Turn on the network lock #7465625*638*#: disable network lock with password Turn off the network lock *7465625*782#: (SIMLOCK*SUB) Subnet Lock enable #7465625* 782*#: Release Subnet lock #465625*77#: (SIMLOCK*SP) Open SP lock #7465625*77# *7465625*27#: (SIMLOCK*CP) Open CP lock #7465625*27*# *7465625*746 #: (SIMLOCK*SIM) Turn on the SIM card lock #7465625*746*# *7465625*228*#: (SIMLOCK*ACT) #7465625*228*# *7465625*28638#: (SIMLOCK*ATNET) Automatically turn on the network lock #7465625*28638# *7465625*28782#n: (SIMLOCK*ATSUB) Subnet lock automatically opens #7465625*28782# *7465625*2877#: (SIMLOCK*ATSP) Automatically opens SP lock #7465625*2877# *7465625*2827 #: (SIMLOCK*ATCP) Automatically turn on CP lock #7465625*2827#: *7465625*28746#: (SIMLOCK*ATSIM) Automatically turn on SIM lock #*7728# RSAV: Reset phone settings, keep phone book *2767* 3855#: E2P Full Reset The phone’s EEPROM is reset (to fix software faults) *2767*2878#: E2P custom Reset The phone’s current settings are reset (the phone is unlocked) *2767*927#: E2P wap reset *2767*49927#: Germany wap preset *2767*44927#：England wap preset *2767*39927#：Italy wap preset *2767*33927#：France wap preset *2767*86927#：China wap preset *2767*852927#：Hong Kong wap preset *2767* 73738927#：RESETWAP