Do you still remember a real experience of port number transfer?

For the reference of friends with related needs.

Unicom's number has been used for ten years. Recently, China Unicom has turned off the 2G/3G signal one after another, and the signal in my area is poor. In this environment, the call experience is even worse (I dialed the number several times to get through, the call was disconnected, the other party couldn't hear me or I couldn't hear the other party ...), so I decided to switch to the network with the number.

The following are the steps of handling operation:

1. Edit the short message "CXXZ# name # ID number" and send it to the original telecom operator Unicom customer service number:10010; Telecom:10001; Mobile: 10086, you can know whether you have the conditions to transfer numbers to the network.

At this step, I found that "there are two reasons that affect the port number transfer to the network ...", and I inquired further according to the SMS prompt. One of the two reasons is that the "promise to stay in the network 10 month" has not expired (it was previously fooled into saying that it was a phone bill); The other is "1 service set" (I don't know what set it is, it is estimated that China Unicom is messing around).

After this step, everyone may feel that there is nothing to do, and they can only wait until the online commitment of 10 months expires. ...

Hey hey, this second step is the key!

2. Call Guangdong Unicom's service supervision telephone number 967577 to complain, and truthfully inform the above inquiry. It will be cancelled soon after the complaint, and you can even apply for transcoding immediately.

(The service supervision telephone numbers of different regions and different operators need to be determined by friends. )

3. After you get the transcoding, you should go to the business hall of the network transfer operator to go through the procedures of accessing the network with the number (it is recommended to apply for transcoding manually after you get the number in the business hall).

Not all business halls can follow up with the number transfer network. Please consult the relevant operators in advance and ask them to provide the address of the nearest business hall.

Manual transcoding application method: edit the short message "SQXZ# name # ID number" and send it to the original telecom operator Unicom customer service number:10010; Telecom:10001; Mobile phone: 10086. After the application message is sent, it usually takes several minutes to receive transcoding.

4. Go through the network access procedures, select relevant packages, and after getting a new SIM card, you need to insert the card to activate it. After the new card is inserted into the mobile phone, enter the IMSI code of the number as prompted. The new card will be officially launched in the next hour (the old card will be invalid).

Pits or unhappiness encountered in this transfer:

1. Incorrect offline transcoding: Guangzhou Unicom 100 10 tricked me into going to the business hall, and I went to the business hall of Jiangnan Avenue. The staff excused me and let me go to the business hall with the right. They kindly checked for me. The nearest business hall is Dongxiao Road, a few kilometers away. ...

2. False concern: As soon as the short message applying for transcoding is sent out, 100 10 will call you enthusiastically and say that there is a call charge for you ... I said, I just want to turn around. Your signal is so poor that the 2G/3G signal is forcibly turned off and almost impossible to use ... The operator unexpectedly turned the subject around. I'll give you feedback on the specific location of the signal difference ... I complained to them about the signal difference a few years ago, but it hasn't improved, and it's getting worse recently ... Besides, it's not a rumor on the Internet, but an announcement issued by Unicom itself to turn off the 2G/3G signal!