What is the simplest and quickest way to identify the authenticity of Yuxi cigarettes?

1. Strip packaging (1) transparent paper packaging 1, high-quality transparent paper for cigarette packets, low friction coefficient; Generally, fake cigarettes are made of universal film. Identification method: real cigarettes are smooth and fake cigarettes are stagnant. 2. Size: the width of soft transparent paper is 340mm, and the width of hard flip cigarette is 350mm. 3. The transparent paper seal (overlapping) is flat: the adhesive seal is flat and does not wrinkle; Straight: parallel to the edge, in a straight line; Uniform: uniform width. 4. The size of the real cigarette, wrinkle and fold sealed at both ends should be basically the same. Because the transparent paper of fake cigarettes is too big, the folding sizes at both ends are often inconsistent, and sharp points often appear. 5. Stay (pull) (1) First check whether there is, what it is and what it is not. (2) Pull-head type: semicircle type: hard flip cigarettes from Shanghai and Kunming cigarette factories and soft and hard box cigarettes from Yuxi cigarette factory. Horseshoe shape: soft-packed cigarettes from Kunming Tobacco Factory and Honghe Tobacco Factory. Square type: some soft cigarettes produced by Yuxi Tobacco Factory. (3) the printing of telegrams (printed by letter and telegram) A: The meaning of words cannot be wrong; B: The font strokes are clear and complete, and the size spacing is even; C: the printing is firm and indelible; D: hot melt adhesive technology is adopted for bonding the stay wires. Key points of transparent paper: texture, overlap and head shape. (2) Box 1, printing (1) color: bronzing, generally anodized bronzing, the real smoke is shiny and shiny; Fake cigarettes have poor luster and no luster. Main cigarette bronzing location: Hongtashan: Mountain, factory name, etc. Hongmei: plum piles, stamens, etc. Ashima: Portraits, etc. Peony: the edge of flowers and leaves; Double happiness (Shanghai): Happy words. There is a dark line with a width of about 10-20mm at the gluing place of real cigarettes. (2) Pattern: The pattern should be clear. (3) Content: brand, specification, model, epigram, factory name and registered trademark symbol R. The requirements for fonts are: clear and complete strokes, uniform font size and spacing, and uniform color. 2. Size specification: the length of soft bag is 270mm or 273mm；; Hard flip covers are available in 280mm, 28 1mm, 282mm, 283mm and 285mm. 3. Glue sealing method: (1) Glue-free European open-top cigarettes: hard box cigarettes from factories in Beijing, Shanghai and Kunming; (2) American-style side seal, three-point, soft pack cigarettes and some hard pack cigarettes are widely used; (3) Two points less, using hard Marlboro. 4. The position and shape of the glue sealing point: keep a certain distance between the two ends to make the point even. Point-like: the shape of the glue sealing point on a cigarette should be basically the same; Different manufacturers, different models and shapes are slightly different, for example, Kunming is bigger and Shanghai is smaller. 5, adhesives generally use cold glue, that is, white glue, and some also use hot melt heating. 6. The counterfeit cigarettes recovered from old cartons mainly include Zhonghua, Hongtashan, Yuxi, Ashima, Sanwu, Peony and Yunyan. Its characteristics are as follows: (1) There are often traces of wear and stains at the corners; (2) There are two traces of adhesive sealing or unsealing after demolition. Second, the small box packaging, (1) transparent paper packaging 1, the texture friction coefficient is low, 0.38, which is basically consistent with the strip box. 2. At the sealing position of the same cigarette, the arrangement direction of cigarette packets is consistent, with high reproducibility, and the manual packaging position is inconsistent. 3.( 1) slider type: Fokker machine, hard box cigarettes from factories in Beijing, Shanghai and Kunming; Semicircular: SASIB6000 packaging machine; Oval (horseshoe): GDX 1, GDX2 packaging machine. Check the key points of cable head: a. Whether the shape is consistent; B. Whether it is regularly symmetrical (that is, a circle is a circle, a square is a square, and an ellipse is an ellipse); C the position and size of the zipper in the same cigarette should be consistent. (2) The strokes of ribbon printing should be clear and complete, the size of words should be evenly spaced, and the size should be consistent with the original, while paying attention to the meaning of words. (2) The colors of the seal (oral flower) 1 and the seal (1) should be basically the same, and the common ones are light and dark. (2) Font: Real cigarettes are clear, and fake cigarettes are not clear. 2. The glue mark on the back should be two parallel straight lines with a width of 2mm. 3. Contrast and check the sealing position of each cigarette packet in the same cigarette, and the real cigarettes are basically the same. 4. The old seal (1) shows signs of overlap and adhesion; (2) Sometimes it will be damaged. (3) cigarette label (cigarette trademark identification) 1, specification gdx1:155mm *100.8mm or 154mm* 100.5mm, saib6000: Hongmei: plum piles, stamens, etc. Ashima: Portraits, etc. Stone forest: patterned border; Special painting garden: side epigrams; Tehong River: small square edge; Peony: flowers, leaves and famous brands; Double happiness: the word edge. Note: real cigarettes are shiny, while fake cigarettes are dull. (2) There is no luster in the glue. (3) font warning statement, the "health" and "quantity" of fake cigarettes are not clear. 3. Anti-counterfeiting label (1) For cigarettes with anti-counterfeiting technology, cigarette labels or transparent paper should have anti-counterfeiting labels that meet the requirements; (2) Anti-counterfeiting labels can not be used as a basis for judging whether cigarettes are true or false, but can be used as a reference. 4. Adhesive (1): White adhesive is generally used for sealing. (2) Glue mark GDX2: Five points are arranged in a strip shape. There are glue marks behind the tongue paper. FOCKE: The small box is sealed with three parallel glue lines, and there are two glue marks behind the tongue paper. GDX 1: The side rubber seal is a three-stage rubber joint, and the upper one is slightly shorter; Under normal circumstances, the edges of machine packaging are not glued, leaving room (a little peeling can make the edges tilt). 5, the old cigarette label counterfeit China, Hongtashan, Sanwu, Ashima cigarettes use old cigarette labels. Attention during appraisal: (1) Pay attention to the crease and wear of the flip cover; (2) Wrinkling at the adhesive seal of transparent paper; (3) Pay attention to whether there are traces of unpacking or secondary gluing at the bottom and mouth of the soft bag. (4) Inside pages 1. At present, there are two kinds of aluminum foil paper used: electrostatic aluminum-plated paper: the gloss is slightly worse, not too straight, and more oxidation; Composite aluminum foil paper: good luster, tall and straight, less oxidation. Multi-purpose composite aluminum foil paper for cigarettes. 2. Pay attention to fonts, patterns, English factory names and Chinese factory names when printing. Printing is done by a packaging machine (hard flip cigarette). 3. Pull open the flipped cigarette: pull the opening slightly, the pulling surface is straight, and the pull-down part is rectangular. Fake cigarettes: a, you can pull them without force; B, it takes a lot of force to break, and the pull mouth is seriously damaged; C, pull the mouth is not rectangular. 4. Size specification |, GDX 1, GDX2, width of SASIB6000 transverse package 1 14mm. FOCKE straight packaging width is 90 mm. 5. The folding method of both ends of aluminum paper is generally the same as that of small packaging machine. (3) cigarette (1) filter tip 1. The material of cigarette is not polypropylene tow, but acetic acid tow. Acetic acid is easily broken, and the peeled tipping paper does not scatter. Polypropylene is not easy to break, but it will spread when peeled off. 2, the mouth length is generally 84mm- 20mm, 100mm-25mm, 8 1 mm- 15 mm. 3. Light filter composite filter: mild 7, Zhongnanhai, Gao Leyan; Hollow filter: Paramount; Laser drilling: Marlboro, Zhongnanhai. 4. Printed designs or printed cigarette names in tipping paper. ; (2) Cigarette 1, and cigarette paper texture rib paper is exposed. The embossed paper used for fake cigarettes has high contrast and poor exposure. (Open space: visible tobacco) 2. Requirements for cigarette butts: flat, straight and even, generally without sticking edges. Generally, the direction of cigarette tipping paper is the same as that of cigarettes, but two adjacent cigarettes in a box may be different. 3. The joint between tipping paper and cigarettes should be smooth and flush, and there should be no leakage or wrinkling. 4. Cut tobacco 1, expanded cut tobacco Generally, there are expanded cut tobacco abroad, Shanghai and Guangzhou, and the expanded cut tobacco can be separated by acetone. 2. Expanded cut stems Yunnan's expanded cut stems have been expanded, and the treatment effect is very good, and the cut stems are very thin, which is one of the important characteristics of Yunnan tobacco. Features: (1) slightly oily luster; (2) Soft and loose texture; (3) the color is lighter or whitish; (4) large and thin. 3. Characteristics of dyed cut tobacco (common fake cigarettes): (1) The color is unnatural; (2) The angle of the cut stem is red or yellow (different from the natural color). The rest of cut tobacco is used by fake cigarette manufacturers to make real cigarettes. Features: (1) often contains scraps of paper, waste tow and other sundries; (2) It often contains swollen stems, etc. 5. Cigarettes: Many foreign cigarettes use cigarettes, but domestic cigarettes generally don't use cigarettes. 5. Smell of 1. Smell style: Yunnan has a light smoke smell, showing the original flavor of tobacco, while Shanghai, Qingdao and Tianjin have a strong smoke smell. 2. Glossy: Tobacco cut tobacco is generally shiny and oily, while fake cigarettes have poor luster. 3. Aroma: The cigarette is thicker and the fake cigarette is worse. 4. Tobacco is highly irritating, with less miscellaneous gas and a clean and comfortable aftertaste. Matters needing attention in identifying the authenticity of cigarettes with intransitive verbs 1. It is necessary to distinguish between authenticity identification and quality inspection in the usual sense, so as to prevent real cigarettes with poor quality (or no quality problems) from being classified as fake cigarettes, or to judge fake cigarettes with good quality as real cigarettes. The main difference between them is that (1) the basis is different: the identification basis is real smoke, and the inspection basis is standard. (2) The purpose is different: the real cigarette inspection is to distinguish the quality from the truth. (3) The nature is different: the real smoke test is quantitative and the identification is qualitative. 2. Grasp several keys (1) and try to grasp the inherent quality characteristics, packaging material characteristics and manufacturing process (silk, cigarette and packaging) characteristics of various cigarette products. (2) Grasp the characteristics and process details of cigarette equipment, and make scientific and reasonable analysis and reasoning. (3) According to the inspection of strips, packets, cigarettes, cut tobacco and smoking evaluation, make a comprehensive analysis and grasp the key and main features. (4) Master the technology of making judgments after comprehensive inspection. It is understood that the production date of cigarettes is generally only marked on the big packaging box, according to GBIT5606? 6? 12—— 1996 Provisions of the State Administration for Industry and Commerce on cigarette packaging, storage and transportation. Because the standard is not specific, the manufacturer has not marked the shelf life and effective date of finished cigarettes.