Position tracker distance of automobile

I think mobile phone positioning is as important as car positioning, especially the more important part. The GPS locator is equivalent to your eyes. You can check the target position and play back the target walking route at any time on your computer or mobile phone. It can also set up automatic alarms for entering and leaving the area and alarms for moving targets. After being installed under the car, it can be viewed in real time by computer or mobile phone, which is convenient and practical. Let's use the car editor to see the distance between the position tracker and the car.

Vehicle position tracker distance &; Mdash & ampMdash How to check the car tracking locator?

1. The emphasis should be on the upper part of the car. Because it depends on satellite positioning, there is no serious obstacle between the locator and the satellite, otherwise it can't be positioned.

2. You can buy a tester in a physical store or online for direct inspection.

3. Or ask the police for specific information.

4. Car position tracker has the necessary frequency and can be monitored by GPS signal detector. Let's see if there is an external GPS signal receiver. If so, look along this line. Look at the scene if you don't show up. Most of them are located in these two places.

Vehicle position tracker distance &; Mdash & ampMdash function

SMS location:

Send short messages directly by mobile phone or PHS; G password &; When rdquo reaches the card number of the device, the device will automatically judge whether the user is authorized, and automatically reply the current location information and status of the user's mobile phone through SMS.

Timing positioning:

The device can regularly report the current location information of the device according to the time preset by the user.

Overspeed alarm: When the vehicle speed exceeds the preset speed, it will give an alarm sound.

Network query:

By visiting &; Ldquo eye of the sky; The system can track the current state of the car and track the playback within a set period of time.

Power supply monitoring: vehicle-mounted power supply is the main power supply, and standby lithium battery is the auxiliary power supply. When the main power supply is cut off, the SMS will remind the user that the standby power supply will start automatically.

One-button alarm: In case of emergency, press the emergency alarm button for 3 seconds, and the device will automatically send a short message and dial the authorized preset number to solve the problem.

Remote monitoring:

Authorization number can dial the device number at any time to monitor the sound around the car in real time.

Remote defense: remote defense and release through millions of passwords.

Remote lock:

Sending instructions to the equipment through SMS can cut off the oil circuit/circuit of the car, and can adjust the oil circuit and circuit of the car well, thus achieving the purpose of locking the car.

Vehicle position tracker distance &; Installation method of mdash & ampmdash automobile global positioning system

Line finding: Check whether the required positioning terminal fittings and wiring tools are complete. In the standard GPS locator, only four lines need to be connected, so first, find the thick line under the car. Global positioning system locator red line &; Normal DC 12/24v voltage of Rarr vehicle. Global positioning system locator black line &; Rarr automobile negative pole/ground wire. Global positioning system locator white line &; Rarr car ACC/ key line (check engine switch status, it must be connected). Yellow line of GPS locator; Automobile oil circuit/route (optional).

SIM card plays an important role in GPS positioning system. Simply put, the GPS locator is responsible for collecting the latitude and longitude data of the terminal. After collecting latitude and longitude data, the positioning data is transmitted to the designated background in the form of GPRS through the GSM network of SIM card, and finally developed into a positioning monitoring system. Note: Please make sure that the GPS positioning terminal is inserted into the SIM card when it is not turned on, otherwise it is easy to burn the card.

After installing the terminal card, return to the first step. Install the wiring sequence in various colors to ensure that the connector will not be lifted or flooded. Please use the standard wiring method of automobile circuit in the wiring process, and don't be perfunctory. On the one hand, the bad line is easy to make the GPS locator unable to work due to power failure, and there are necessary safety hazards such as short circuit and fire.

The fixed GPS locator of the terminal is small in size and easy to be installed concealed. The common fixed position is to remove the front baffle of the main driver/co-pilot, and it can also be installed in the empty room, under the seat, trunk and other places inside it. On the one hand, it can ensure that the GPS antenna can receive satellite signals normally, on the other hand, it can ensure that the car is not easy to get water when washing the car, which will affect the terminal combustion.

After all the above processes are activated, the car will be restored. Then report the license plate number, terminal ID, SIM card number and other information to the company's customer service staff for activation, so that the car can be located and managed in computers, mobile phones and WeChat.

The car tracker depends on how to use it. It can be a sharp weapon or a murder weapon. Where can most cars install position trackers? Most wiring devices are installed near the dashboard of the car. Because the locator needs to be connected to the normal circuit of the car, most of the locators are basically stuck somewhere in the car, such as under the car and the passenger seat. I hope that the information shared by the car editor about the distance of the car positioning tracker can solve the problem and let friends know more.

Million car purchase subsidy