How to restore the whitening of Apple's mobile phone after jailbreak?

Apple's mobile phone turned white after jailbreak. How did Apple recover from prison break? Solution:

1, update to the latest version of iTunes; ;

2. Enter DFU recovery mode for recovery; (DFU mode: 1. Turn off your iPhone2. Press and hold the On/Off button and the home button at the same time; 3. When you see the white Apple logo, please release the On/Off key and continue to press and hold the home button; 4. Open iTunes and wait for it to prompt you to resume mode, then press and hold the shift key on the keyboard, click "Resume" and select the corresponding firmware to resume. )

3. Open the correct port and allow access to the Apple server;

4.USB fault diagnosis;

5. Restore on other computers.

What should I do if my Apple phone turns white after jailbreaking? Connect to iTunes and follow the instructions inside.

How to repair and restore the iPhone after jailbreak? Apple can be divided into two recovery modes, one is called DFU mode, and the other is called recovery mode.

The full name of DFU is Development FirmwareUpgrade, which actually refers to the mandatory upgrade mode of iPhone firmware.

In recovery mode, itunes and data cable icons are displayed on the screen.

The biggest difference between the two is that DFU mode does not start MAC OS system, and itunes can't decide whether the recovery process of iPhone is interrupted, because the system is not started and related services can't be enabled. It is said that the iPhone restored by DFU mode is more thorough. I have not compared it, so I won't make a conclusion here.

Generally speaking, for example, our equipment has a software failure and can't start normally, for example, our equipment's boot password has been forgotten, and there is the legendary white apple, and so on. It can be solved in this way. So I call him invincible redrawing mode ~

Let's start the tutorial:

First, the detailed steps to enter DFU. (After successfully entering, the screen is completely black. )

Note: When entering DFU operation, please be sure to connect the data cable to the computer.

1. Press and hold the power switch for 3 seconds. 2. Connect and press power+home when the screen turns black, and read silently for about 10 second. 3. Release the power switch and keep the home keyboard for more than 10 seconds, or longer, and the screen is black.

When all buttons are released, the screen will be completely black and enter dfu mode. Opening itunes at this time will prompt you to restore your phone. If you don't have a good grasp of the time, it is recommended that novices use the red snow tool to enter dfu mode and follow the prompts. Click to download Hongxue to open Hongxue's tool and choose to tease other places. As shown in the picture, you will enter DFU. During the operation according to the Chinese prompts, the code will be displayed on the iPhone screen, waiting patiently for the progress bar to be completed. After completing the prompt, you have successfully entered DFU mode. As shown in the figure. Secondly, the detailed steps to enter the recovery mode. (Screen display icon)

The entry method of recovery mode is simple.

1. First, disconnect the data cable. Turn off the iPhone.

2. After shutdown, press and hold the HOME button to stay still, connect the data cable to the computer, and release the HOME button.

As shown in the screen, the recovery mode is successful. When you connect to itunes, you will also be prompted that you have entered recovery mode.

Third, exit the recovery mode.

The method is simple. Just press and hold the HOME button+Power button until the white Apple logo appears on the screen.

At this point, the introduction of two methods for iPhone and iPad to enter recovery mode is completed.

The operation steps of the solution for whitening apples after tablet jailbreak is restored to factory settings are as follows:

1. Download the latest version of itunes on the computer side, otherwise it may cause unknown errors when reinstalling.

2. Connect the ipad to itunes, close the iPad, press and hold the Home button and the Shut Down button at the same time 10 second, release the Shut Down button, and continue to press and hold the Home button until you see that the devices on the computer are recognized as DFU. When prompted by the computer, release the home button, select the restore option button on itunes, and click OK to restore in the pop-up selection box.

3. Next, itunes will pop up a page, prompting that all contents will be erased and will be verified and restored with the Apple server. When the verification and file extraction are completed, iTunes will automatically reinstall the downloaded firmware version for the ipad, and restart the ipad after the installation is successful.

Iphone jailbreak to white apple, how to brush the machine, about tens of dollars.

Apple 5 turned white and black after prison break. How to recover? Can I escape from prison after recovery? Just brush the latest firmware again. If you can recover, you can escape again. Pay attention to the escape steps.

How to restore the factory settings to white after Apple 5S jailbreak? Press and hold the power-on button and the Home button at the same time, shut down forcibly, and then turn it on to see if you can enter the system. If you can't display anything on the screen.

How to restore the iphone jailbreak white apple At present, iPhone users mainly jailbreak iOS7. 1.x After successful jailbreak, some users will have white apples. This is because iOS devices are not compatible with many 32-bit plug-ins in Cydia, a jailbreak store. We can do this:

1) First, download itunes from Apple official website, install it on your computer, and download the new version package of Apple's IOS system (you don't need to download it if you have a backup).

2) After downloading and installing itunes, you are now ready to connect Apple products (iPhone, ipad, itouch) to your computer with data cables.

3) This part is the key, which is the identification of itunes.

1, click on the computer-side itunes to start, and keep itunes started.

2. Connect the data cable, so that Apple products can be connected to the computer through the data cable.

3. When the iPhone is on the "White Apple" screen, press and hold the HOME button (the circle button in the middle below) and the power button (the button that is usually turned on and off). Remember, hold them down at the same time until the "white apples" on the screen disappear (the screen is completely black like a normal shutdown).

4. Press and hold the HOME button and the power button at the same time until the power button is turned off, and then turn on the power button (the button that usually turns on and off).

5. After connecting to itunes, the picture shown above will be displayed, indicating that your iPhone has been successfully connected to the computer!

After the iPhone successfully connects to itunes, you can choose. There are two ways:

First, users with backups can directly see the button to restore the device in itunes, and click Restore!

Second, if there is no backup, you can press and hold the "Shift" key of the computer keyboard and click to check the update, and then select the downloaded firmware package to update or upgrade!

What should I do if iPhone6 plus turns white after jailbreak? What should I do if the white apple turns brick after prison break? I believe many users are still unclear about how to turn white apples into bricks after Apple 6 plus jailbreaks. Let me share with you the perfect jailbreak scheme for iphone6 plus. Interested users can come and have a look. Apple 6 plus perfect jailbreak white apple brick solution: Step 1, download and install iTunes, disconnect the iOS device from the computer, press and hold the "home button"+"power button" for 8 seconds to shut down, and then press and hold the "home button" for 8 seconds to connect the computer through the data cable after shutdown. Step 2: iTunes will automatically detect the devices waiting to be restored, and then click OK. Step 3: Press and hold the shift key +Restore on +iTunes on the keyboard to select the firmware. In the fourth step, the equipment will start to brush again and return to a brand-new system. Step 5: After recovery, click "Set as New Device" on iTunes.

What should I do if iPhone6 plus turns white after jailbreak?

1. Generally, when writing system files, there will be problems such as the order of production or installation, the conflict between software and software, and the conflict between software and system.

2, or deleting system files at will or by mistake will also cause white apples;

3. Otherwise, the system-related files are lost due to the anti-installation of software, and the apple is white;

4. The external environment is overheated or the iPhone shakes violently, which sometimes leads to white apples;

5. Non-iTunes installers, especially writing system classes, are most likely to cause ginkgo biloba, and some consequences are irreversible!

6. Only the software in the APP folder is generally unlikely to cause ginkgo biloba.

How to restore the phenomenon of white apples;

1. Use the firmware recovery method. This method is easy to lose current information.

Use iTunes to restore and upgrade iPhone；;

Use TinyUmbrella to restore to an earlier version of the system.

2. Manually solve the problem of white apples.

A. Connect 9 1 mobile assistant, enter the /System/Library/LaunchDaemons folder, and download Apple. Save the SpringBoard.plist file to your computer.

B, open this file with wordpad, pay attention to the format confusion when opening it with notepad.

C. Find the last installed software that causes white apples, such as xxx software, and delete the/applications/xxx.app/xxxx.dylib field and save it.

D, press and hold the power supply and Home to power off and then power on.